FreeBSD on AlphaServer 1000A 4/266
Santanu Das
santanu at hep.phy.cam.ac.uk
Mon May 17 04:44:18 PDT 2004
On Mon, 2004-05-17 at 12:35, Jean-Francois Gobin wrote:
> I guess you mean "install in place of" DUNIX ?
Yup, that's the thing I want to do - no DUNIX any more, only FreeBSD :)
Santanu
>
> JF
>
>
> On Mon, 17 May 2004, Wilko Bulte wrote:
>
> > On Mon, May 17, 2004 at 12:21:28PM +0100, Santanu Das wrote:
> >
> > There are no partitions (as in the equivalent found on PCs) for SRM.
> > You need a seperate disk to install FreeBSD onto. Or you can of course
> > install on top of DUNIX.
> >
> > W/
> >
> > >
> > > Hi,
> > >
> > > Another question: What type of partition do I need to install FreeBSD on
> > > my AlphServer 1000A (4/266)? Currently I've Digital Unix 4.0b running on
> > > it....can I install top of that? I *don't* want any duel boot.
> > >
> > > Many thanks,
> > > Santanu
> > >
> > >
> > > On Sat, 2004-05-15 at 13:39, Jean-Francois Gobin wrote:
> > > > Unfortunately, it seems that something is not really well supported. Some
> > > > pointers on how you may debug ...
> > > >
> > > > 1) Do what it says : press a key (don't remember for serial, but at
> > > > "direct" console, it's ctrl-c) to run into SRM.
> > > >
> > > > 2) there, "show os" and "set os UNIX" if it's set to "VMS" or "OPENVMS".
> > > >
> > > > 3) "test" just to be on the safe side ... Should run for a loooooong while
> > > > and then drop you back on console. If something runs short, it will take a
> > > > dump.
> > > >
> > > > 4) "show error(s)" ... Show the error log
> > > >
> > > > 5) Eventually, try to upgrade the SRM to the latest revision for your
> > > > system.
> > > >
> > > > By the way, it that EV4, EV5 or EV6 processor(s) ?
> > > >
> > > > JF
> > > >
> > > >
> > > >
> > > >
> > > > On Sat, 15 May 2004, Santanu Das wrote:
> > > >
> > > > > Hi all,
> > > > >
> > > > > Many thanks for all of yours reply.
> > > > > Every time I try to boot FreeBSD from installation CD, it seems to start
> > > > > fine, with lines like:
> > > > >
> > > > > FreeBSD/Alpga SRM CD9660 boot, Revision 1.2
> > > > > (root at mithlond.btc.adaptec.com, Mon Feb 23 19:12:15 GMT 2004)
> > > > > Memory 229376 k
> > > > > Loading /boot/defeaults/loader.conf
> > > > > /boot/kernel/kernel data=0x50a3c0+0x41b00 sysms[0x8+0x67350+0x51223.........
> > > > > -
> > > > > then it displays:
> > > > >
> > > > > Hit [Enter] to boot immediately, or any other key for command prompt,
> > > > > Booting [/boot/kernel/kernel]....
> > > > > /
> > > > >
> > > > > and then ends up with:
> > > > >
> > > > > Unexpected machine check:
> > > > >
> > > > > mces = 0x1
> > > > > vector = 0x660
> > > > > param = 0xfffffc0000006000
> > > > > pc = 0xfffffc0000697084
> > > > > ra = 0xfffffc00003b4c98
> > > > > curproc = 0xfffffc00008123e0
> > > > > pid = 0, comm = swapper
> > > > >
> > > > > panic: machine check
> > > > > cpuid: 0;
> > > > > Uptime: 1s
> > > > > Automatic reboot in 15 seconds - press a key on the console to abort
> > > > >
> > > > > then going back to 'booting from the CD' stage. It's happening again again.
> > > > > Surprisingly, when I try to install Digital Unix, it's not complaining -
> > > > > just installing smoothly.
> > > > >
> > > > > Any idea what' might be the problems?
> > > > >
> > > > > Santanu
> > > > >
> > > > > PS. Jean - thanks for your offer, you seem to be a true Alpha lover. It
> > > > > has found a good home just a few days
> > > > > ago - that's mine - and I wanna take care of her as long as I can. I'll
> > > > > let you know by sure if I change my mind in future.
> > > > >
> > > > >
> > > > > Jean-Francois Gobin wrote:
> > > > >
> > > > > >I think it would be best to try booting the installer before doing
> > > > > >anything else that may damage your DG UX install.
> > > > > >
> > > > > >In SRM, when you're sure you may boot safely, you can rip off any boot
> > > > > >options (file, flag, autodevice and so on), just to be on the safe side.
> > > > > >
> > > > > >
> > > > > >PS : if you want to get rid of your AS, don't hesitate to contact me! I
> > > > > >can make a little room for her! ;-)
> > > > > >
> > > > > >JF
> > > > > >
> > > > > >
> > > > > >On Sat, 15 May 2004, Santanu Das wrote:
> > > > > >
> > > > > >
> > > > > >
> > > > > >>Hi,
> > > > > >>
> > > > > >>At present Digital Unix is running on the system, I just want to remove
> > > > > >>that want to install fresh copy of FreeBSD. Do I need to format the disk
> > > > > >>before start FreeBSD installation? Is there any option from SRM console
> > > > > >>to do that?
> > > > > >>
> > > > > >>Santanu
> > > > > >>
> > > > > >>Dan Williams wrote:
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >>>Hi,
> > > > > >>>
> > > > > >>>I'm running 5.1-RELEASE on an AS 1000A 5/400, but again that's an EV5 and
> > > > > >>>not an EV4 like the 4/266 would have... I would assume it works though.
> > > > > >>>
> > > > > >>>Dan
> > > > > >>>
> > > > > >>>On Fri, 14 May 2004, Wilko Bulte wrote:
> > > > > >>>
> > > > > >>>
> > > > > >>>
> > > > > >>>
> > > > > >>>
> > > > > >>>>On Fri, May 14, 2004 at 08:11:10PM +0100, Santanu Das wrote:
> > > > > >>>>
> > > > > >>>>Not 5.2.1 because we do not have that model at work anymore, but previously
> > > > > >>>>4.x ran fine on these machines. I had EV5 CPUs in ours though.
> > > > > >>>>
> > > > > >>>>Have you read the Alpha version of HARDWARE.TXT? That has more info
> > > > > >>>>on the various Alpha models.
> > > > > >>>>
> > > > > >>>>Wilko
> > > > > >>>>
> > > > > >>>>
> > > > > >>>>
> > > > > >>>>
> > > > > >>>>
> > > > > >>>>>Hi,
> > > > > >>>>>
> > > > > >>>>>This is the first time I'm trying FreBSD and even more, the very first
> > > > > >>>>>on a AlphaServer. I downloaded four iso images namely,
> > > > > >>>>>5.2.1-RELEASE-alpha-bootonly.iso, 5.2.1-RELEASE-alpha-disc1.iso,
> > > > > >>>>>5.2.1-RELEASE-alpha-disc2.iso and 5.2.1-RELEASE-alpha-miniinst.iso from
> > > > > >>>>>mirror side. Do I need to burn all these images?
> > > > > >>>>>
> > > > > >>>>>Did any ever body install FreeBSD on that particular machine (AS 1000A
> > > > > >>>>>4/266) or know about any known constraint?
> > > > > >>>>>Any related information would be much more appreciate!!!
> > > > > >>>>>
> > > > > >>>>>Santanu
> > > > > >>>>>
> > > > > >>>>>
> > > > > >>>>>_______________________________________________
> > > > > >>>>>freebsd-alpha at freebsd.org mailing list
> > > > > >>>>>http://lists.freebsd.org/mailman/listinfo/freebsd-alpha
> > > > > >>>>>To unsubscribe, send any mail to "freebsd-alpha-unsubscribe at freebsd.org"
> > > > > >>>>>
> > > > > >>>>>
> > > > > >>>>>
> > > > > >>>>>
> > > > > >>>>---end of quoted text---
> > > > > >>>>
> > > > > >>>>--
> > > > > >>>>Wilko Bulte wilko at FreeBSD.org
> > > > > >>>>_______________________________________________
> > > > > >>>>freebsd-alpha at freebsd.org mailing list
> > > > > >>>>http://lists.freebsd.org/mailman/listinfo/freebsd-alpha
> > > > > >>>>To unsubscribe, send any mail to "freebsd-alpha-unsubscribe at freebsd.org"
> > > > > >>>>
> > > > > >>>>
> > > > > >>>>
> > > > > >>>>
> > > > > >>>>
> > > > > >>>
> > > > > >>>
> > > > > >>>
> > > > > >>_______________________________________________
> > > > > >>freebsd-alpha at freebsd.org mailing list
> > > > > >>http://lists.freebsd.org/mailman/listinfo/freebsd-alpha
> > > > > >>To unsubscribe, send any mail to "freebsd-alpha-unsubscribe at freebsd.org"
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >
> > > > > >----------
> > > > > >Jean-Francois Gobin - Administrateur gobinjf.be
> > > > > >http://www.gobinjf.be mailto:gobin at gobinjf.be
> > > > > >
> > > > > >
> > > > >
> > > >
> > > > ----------
> > > > Jean-Francois Gobin - Administrateur gobinjf.be
> > > > http://www.gobinjf.be mailto:gobin at gobinjf.be
> >
> >
> > ---end of quoted text---
> >
> > --
> > Wilko Bulte wilko at FreeBSD.org
> >
>
> ----------
> Jean-Francois Gobin - Administrateur gobinjf.be
> http://www.gobinjf.be mailto:gobin at gobinjf.be
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-alpha/attachments/20040517/0c29b4c3/attachment.bin
More information about the freebsd-alpha
mailing list