SRM not initialising cards behind a bridge

[Bernd Walter]

On Tue, Jun 22, 2004 at 09:28:13PM +0200, Michael Kukat wrote:
> Hi !
> 
> On Tue, 22 Jun 2004, Jean-Francois Gobin wrote:
> > By the way, in SRM, what does "SHOW PCI" and "SHOW ISA" reports ?
> 
> Didn't check those commands, bit show conf shows all PCI stuff fine (cards, and
> the 4 NICs behind the bridge), and the onboard ISA devices configured by isacfg
> -init. There are no more ISA cards in it. Currently, the NIC is in my server,
> which i'm writing these lines on, and which i don't want to take down again
> currently. Maybe i'll put the card into my AlphaStation 200 the weekend to
> track down the uaf problems.

I think AS200 needs IRQ routing support done first.
Let me know if you have IRQ problems - routing support is simple to
implement if test hardware is available.

-- 
B.Walter                   BWCT                http://www.bwct.de
bernd at bwct.de                                  info at bwct.de