Does anyone use a FDDI card on 5.0?
Oliver Lehmann
lehmann at ans-netz.de
Mon Mar 31 11:30:15 PST 2003
Hiho,
here we go:
*** keyboard not plugged in...
ff.fe.fd.fc.fb.fa.f9.f8.f7.f6.f5.f3.f2.f1.f0.
ef.ee.ed.probing hose 0, PCI
probing PCI-to-ISA bridge, bus 1
bus 0, slot 5 -- pka -- NCR 53C895
bus 0, slot 9 -- fwa -- DEC PCI FDDI
bus 0, slot 11 -- dqa -- CMD PCI0646 IDE
bus 0, slot 11 -- dqb -- CMD PCI0646 IDE
ec.f4.eb.ea.e9.e8.e7.
Digital AlphaPC 164LX 599 MHz Console V5.8-1, Jun 21 2000 11:28:32
CPU 0 booting
(boot dka0.0.0.5.0)
block 0 of dka0.0.0.5.0 is a valid boot block
reading 15 blocks from dka0.0.0.5.0
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 1e00
initializing HWRPB at 2000
initializing page table at 1ffee000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code Loading /boot/loader
*** no timer interrupts on CPU 0 ***
Console: SRM firmware console
VMS PAL rev: 0x1000200010115
OSF PAL rev: 0x1000200020117
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM disk boot, Revision 1.2
(olivleh1 at dill.salatschuessel.net, Sun Mar 23 19:14:47 CET 2003)
Memory: 262144 k
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x2ebbe0+0x56af0 syms=[0x8+0x48c00+0x8+0x38573]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 6 seconds...
Type '?' for a list of commands, 'help' for more detailed help.
OK boot -v
Entering /boot/kernel/kernel at 0xfffffc0000336520...
sio1: gdb debugging port
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE-p6 #3: Mon Mar 31 20:02:01 CEST 2003
olivleh1 at dill.salatschuessel.net:/usr/obj/usr/src/sys/DILL
Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc00006c6000.
EB164
Digital AlphaPC 164LX 599 MHz, 598MHz
8192 byte page size, 1 processor.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x1000200020117
real memory = 266256384 (253 MB)
Physical memory chunk(s):
0x006e8000 - 0x0ffe3fff, 261079040 bytes (31870 pages)
avail memory = 252870656 (241 MB)
Initializing GEOMetry subsystem
random: <entropy source>
null: <null device, zero device>
mem: <memory & I/O>
cia0: <2117x Core Logic chipset>
cia0: Pyxis, pass 1
cia0: extended capabilities: 1<BWEN>
pcib0: <2117x PCI host bus adapter> on cia0
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 4, range 32, base 00010000, size 8, enabled
map[14]: type 1, range 32, base 82041000, size 8, enabled
map[18]: type 1, range 32, base 82040000, size 12, enabled
found-> vendor=0x1000, dev=0x000c, revid=0x01
bus=0, slot=5, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x1e (7500 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=2
map[10]: type 4, range 32, base 00010100, size 7, enabled
map[14]: type 1, range 32, base 82041100, size 7, enabled
found-> vendor=0x10b7, dev=0x9200, revid=0x74
bus=0, slot=6, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=0
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x8086, dev=0x0484, revid=0x43
bus=0, slot=8, func=0
class=00-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base 82041180, size 7, enabled
map[14]: type 4, range 32, base 00010180, size 7, enabled
map[18]: type 1, range 32, base 82030000, size 16, enabled
found-> vendor=0x1011, dev=0x000f, revid=0x00
bus=0, slot=9, func=0
class=02-02-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
map[20]: type 4, range 32, base 00010210, size 4, enabled
found-> vendor=0x1095, dev=0x0646, revid=0x01
bus=0, slot=11, func=0
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=5
sym0: <895> port 0x10000-0x100ff mem 0x82040000-0x82040fff,0x82041000-0x820410ff irq 2 at device 5.0 on pci0
sym0: Delay (GEN=11): 240 msec, 37034 KHz
sym0: Delay (GEN=11): 231 msec, 38477 KHz
sym0: Delay (GEN=11): 230 msec, 38644 KHz
sym0: chip clock is 38477KHz
sym0: clock multiplier assumed
sym0: Tekram NVRAM, ID 7, Fast-40, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 07/4e/80/01/08/24
sym0: Delay (GEN=11): 289 msec, 30755 KHz
sym0: Delay (GEN=11): 286 msec, 31078 KHz
sym0: Delay (GEN=11): 285 msec, 31187 KHz
sym0: interrupting at CIA irq 2
sym0: enabling clock multiplier
sym0: Downloading SCSI SCRIPTS.
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x10100-0x1017f mem 0x82041100-0x8204117f irq 0 at device 6.0 on pci0
xl0: interrupting at CIA irq 0
xl0: Ethernet address: 00:01:02:b4:75:9e
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
PCI-ISA bridge with incorrect subclass 0x0
PCI-ISA bridge with incorrect subclass 0x0
isab0: <PCI-ISA bridge> at device 8.0 on pci0
isa0: <ISA bus> on isab0
fpa0: <Digital DEFPA PCI FDDI Controller> port 0x10180-0x101ff mem 0x82030000-0x8203ffff,0x82041180-0x820411ff irq 3 at device 9.0 on pci0
unexpected machine check:
mces = 0x1
vector = 0x660
param = 0xfffffc0000006068
pc = 0xfffffc0000530d84
ra = 0xfffffc000039b51c
curproc = 0xfffffc00005fdaf8
pid = 0, comm = swapper
Stopped at DELAY+0x30: rpcc t0 <t0=0x1>
db> show reg
v0 0x20411ac
t0 0x257 intr_n+0x216
t1 0
t2 0xfb intr_n+0xba
t3 0
t4 0x3b627560
t5 0x3b627552
t6 0x100000000
t7 0xfffffc00006ce000
s0 0
s1 0x3
s2 0xfffffc000075fab8
s3 0xfffffc000075f000
s4 0xfffffc000075f000
s5 0
s6 0xffffffff82041180
a0 0x3e8 intr_n+0x3a7
a1 0x20411ac
a2 0x1
a3 0x1
a4 0x1
a5 0xfffffc00006cd940
t8 0xfffffc00005ed170 cycles_per_usec
t9 0xfffffc0000522028 uma_dbg_alloc+0x68
t10 0
t11 0x2000 intr_n+0x1fbf
ra 0xfffffc000039b51c pdq_stop+0x52c
t12 0xfffffc0000530d30 DELAY
at 0x20001ff8
gp 0xfffffc00005eebe0 db_lhistory+0x460
sp 0xfffffc00006cdac0
pc 0xfffffc0000530d84 DELAY+0x54
ps 0x6
ai 0x2000 intr_n+0x1fbf
pv 0xfffffc0000530d30 DELAY
DELAY+0x54: cmpule t2,t0,t0 <t2=0xfb,t0=0x257>
db> ps
pid proc addr uid ppid pgrp flag stat wmesg wchan cmd
20 fffffc000f81bb00 fffffe000a424000 0 0 0 0000204 new [IWAIT] intr: xl0
19 fffffc000f87c000 fffffe000b7e6000 0 0 0 0000204 new [IWAIT] intr: sym0
18 fffffc000f87c300 fffffe000b7e8000 0 0 0 0000204 new [IWAIT] swi5: task queue
17 fffffc000f87c600 fffffe000b7ea000 0 0 0 0000204 new [IWAIT] swi3: cambio
16 fffffc000f7cc000 fffffe000a2de000 0 0 0 0000204 new [IWAIT] swi2: camnet
15 fffffc000f7cc300 fffffe000a3a0000 0 0 0 0000204 new [RUNQ] random
ffc000f7ccc00 fffffe000a3a6000 0 0 0 0000204 new [RUNQ] g_event
14 fffffc000f7ccf00 fffffe000a3a8000 0 0 0 0000204 new [IWAIT] swi1: net
13 fffffc000f7cd200 fffffe000a3aa000 0 0 0 0000204 new [IWAIT] swi4: vm
12 fffffc000f7cd500 fffffe000a3ac000 0 0 0 000020c new [IWAIT] swi6: clock
11 fffffc000f7cd800 fffffe000a3ae000 0 0 0 000020c norm[Can run] idle
1 fffffc000f7cdb00 fffffe000a3b0000 0 0 0 0000200 newpanic: unknown thread state
panic
Stopped at Debugger+0x34: zapnot v0,#0xf,v0 <v0=0x7>
db> continue
Uptime: 1s
panic: Assertion mtx_unowned(m) failed at /usr/src/sys/kern/kern_mutex.c:956
panic
Stopped at Debugger+0x34: zapnot v0,#0xf,v0 <v0=0x7>
db> call boot(0)
Uptime: 1s
panic: _sx_xlock (shutdown_final): xlock already held @ /usr/src/sys/kern/kern_shutdown.c:367
panic
Stopped at Debugger+0x34: zapnot v0,#0xf,v0 <v0=0x7>
db> call cpu_reset()
but why i got no crash-dump?
After the shutdown, i removed the fddi card, and booted again:
[...]
Checking for core dump...
savecore: no dumps found
[...]
hrm... what did i wrong in db?
root at dill /root> gdb -k /boot/kernel/kernel.debug
GNU gdb 5.2.1 (FreeBSD)
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "alpha-undermydesk-freebsd"...
(kgdb) l *0xfffffc0000530d84
0xfffffc0000530d84 is in DELAY (/usr/src/sys/alpha/alpha/machdep.c:1123).
1118 * last checked. Add the current cycle count to the
1119 * running total. If it's over cycles_per_usec, increment
1120 * the usec counter.
1121 */
1122 cycles += curcycle;
1123 while (cycles > cycles_per_usec) {
1124 usec++;
1125 cycles -= cycles_per_usec;
1126 }
1127 pcc0 = pcc1;
(kgdb) l *0xfffffc000039b51c
0xfffffc000039b51c is in pdq_stop (/usr/src/sys/dev/pdq/pdq.c:1327).
1322 for (cnt = 0; cnt < 1000; cnt++) {
1323 PDQ_OS_CONSUMER_POSTSYNC(pdq);
1324 pdq_process_command_responses(pdq);
1325 if (pdq->pdq_command_info.ci_response_producer == pdq->pdq_command_info.ci_response_completion)
1326 break;
1327 PDQ_OS_USEC_DELAY(1000);
1328 }
1329 state = PDQ_PSTS_ADAPTER_STATE(PDQ_CSR_READ(csrs, csr_port_status));
1330 }
1331
(kgdb)
Greetings, Oliver
PS: yes, i disabled the 74-chars warp for this mail...Andrew Gallatin wrote:
--
Oliver Lehmann
@home: lehmann at ans-netz.de
@office: oliver.lehmann at mgi.de
@www: http://www.pofo.de/ | http://wishlist.ans-netz.de/
More information about the freebsd-alpha
mailing list