UW2 cards don't like to run at UW2?

[David O'Brien]

On Mon, Aug 11, 2003 at 08:19:51PM -0400, Jeremy Tregunna wrote:
> I am also suffering from this same problem. Using a QLogic 1040 with a
> 36.7GB IBM Ultrastar Ultra160 SCSI drive (should be able to do 80MB just
> fine). Information about the hardware is at the end of the message.
...
> da0: <IBM DDYS-T36950N S96H> Fixed Direct Access SCSI-3 device
> da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing

The QLogic 1040 is an UltraWide controller (i.e. 20 mega-transfers per
second at 16-bit transfers) -- you *are* getting the proper SCSI speed.
You may be confusing your Qlogic 1040 with the Qlogic 1080 which is an
Ultra2 controller.

-- 
-- David  (obrien at FreeBSD.org)