Suspend to RAM problem

[Michael Freisinger]

Hello,

I've built up a NAS system with the following hardware:

- Mainboard: ASUS B150M-K D3 LGA1151
- CPU: Intel BX80662G4400 Prozessor
- RAM: 2x 8GB Kingston ValueRAM DDR3-1600 DIMM CL11 Single

As OS I'm using FreeNAS V9.10 that is based on FreeBSD.

I'm using this OS, because it provides the possibility to encrypt my data.
Therefore it is necessary to enter a passphrase to unlock my hard drives
after each reboot.
Since I don't want to run the NAS all time and I don't want to enter the
passphrase for each access, the suspend to RAM mode is very important for
me.

And here is my problem:
When I execute the command "acpiconf -s 3" the system is starting to
suspend. However after a while (just a few seconds) the system is rebooting
(ASUS boot screen is displayed) and I have to type in the passphrase again.

I already tried to fix this with your description from chaptor "11.16.3.5
System Powers Up After Suspend or Shutdown", but without success.

I attached some logs. I thing the names are self-explanatory.
The  ACPI Source Language file can be found here:
https://dl.dropboxusercontent.com/u/17336975/root-ASUSB150M-KD3LGA1151.asl

If you need further logs or information, please contact me.

Thank you very much in advance.

Best regards,
Michael
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dmesgWithAcpi.output
Type: application/octet-stream
Size: 9733 bytes
Desc: not available
URL: <http://lists.freebsd.org/pipermail/freebsd-acpi/attachments/20160421/7fe7e48a/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: sysctlHwAcpi.output
Type: application/octet-stream
Size: 1222 bytes
Desc: not available
URL: <http://lists.freebsd.org/pipermail/freebsd-acpi/attachments/20160421/7fe7e48a/attachment-0001.obj>