Cant load Marvell Yukon network
interfacewithacpienabledandAtherosAR5005withacpidisabled.
Wildes Miranda de Oliveira
gowmo at itecgyn.com.br
Thu Aug 9 12:58:02 PDT 2007
please, does anyone have any idea ? what i can do ?
thanks Nate.
wildes miranda
On Thu, 09 Aug 2007 11:59:00 -0700, Nate Lawson <nate at root.org> wrote:
> Please redirect this to the list. I'm not sure why this 16 KB
> allocation fails.
>
> Wildes Miranda de Oliveira wrote:
>> On Tue, 7 Aug 2007 20:42:34 +0000, Wildes Miranda de Oliveira
> <gowmo at itecgyn.com.br> wrote:
>>> On Tue, 07 Aug 2007 09:53:08 -0700, Nate Lawson <nate at root.org> wrote:
>>>> Wildes Miranda de Oliveira wrote:
>>>>> n Tue, 07 Aug 2007 09:16:22 -0700, Nate Lawson <nate at root.org> wrote:
>>>>>> Wildes Miranda de Oliveira wrote:
>>>>>>> On Mon, 06 Aug 2007 20:06:56 -0700, Nate Lawson <nate at root.org>
>>> wrote:
>>>>>>>> Wildes Miranda de Oliveira wrote:
>>>>>>>>>> hi list,
>>>>>>>>>>
>>>>>>>>>> excuse-me my poorly english.
>>>>>>>>>>
>>>>>>>>>> recently i bought one notebook acer aspire 3680, and i have had
>>>>>>>> problems
>>>>>>>>>> for load network interfaces on them.
>>>>>>>>>> the problem is that the interface ethernet Marvell Yukon don't
>>> load
>>>>>>>> with
>>>>>>>>>> acpi enabled, and the interface
>>>>>>>>>> wireless Atheros AR5005 don't load with acpi disabled, with this
>>>>>> it´s
>>>>>>>>>> never load on same bootstrap.
>>>>>>>>>> i'm annexing informations about dmesg with acpi enabled/disabled
> ,
>>>>>>>>>> acpidump and pciconf -lv.
>>>>>>>>>>
>>>>>>>>>> i wish ask you about tunning of acpi described in man page.
> could
>>>>>> this
>>>>>>>>>> solve my problem ?
>>>>>>>>>>
>>>>>>>> Set debug.acpi.disabled="sysres" at the loader prompt or in
>>>>>>>> /boot/loader.conf
>>>>>> Did this work?
>>>>> no, this did not work. what this would do ?
>>>> Sorry, I meant "sysresource", not "sysres".
>>>>
>>>> If you read the man page for acpi, you'll find out.
>>>>
>>>> -Nate
>>> Sorry, i did not get success. i just observed that error message in
>>> attach mskc0 interface changed id an rev values from dmesg without
>>> debug.acpi.disabled="sysresource". see below :
>>>
>>> #without debug.acpi.disabled="sysresource"
>>>
>>> mskc0: <Marvell Yukon 88E8038 Gigabit Ethernet> irq 16 at device 0.0 on
>>> pci2
>>> mskc0: 0x4000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).
>>> mskc0: unknown device: id=0x00, rev=0x00
>>> device_attach: mskc0 attach returned 6
>>>
>>> #with debug.acpi.disabled="sysresource"
>>>
>>> mskc0: <Marvell Yukon 88E8038 Gigabit Ethernet> irq 16 at device 0.0 on
>>> pci2
>>> mskc0: 0x4000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).
>>> mskc0: unknown device: id=0xff, rev=0x0f
>>> device_attach: mskc0 attach returned 6
>>>
>>> what i can do for to guide you to help me ?
>>>
>>> thanks.
>>
>> please, do you have any idea ? what i can do ?
>>
>> thanks.
>>
>> wildes miranda
More information about the freebsd-acpi
mailing list