ACPI Problem With Toshiba Tecra A4

[Yousef Raffah]

On Mon, 2005-10-03 at 14:56 -0700, Nate Lawson wrote:
> Yousef Raffah wrote:
> > Hello Everyone,
> > 
> > I've been struggling a lot with acpi but still can't figure out how to
> > have it working properly with FreeBSD
> > 
> > I just updated my BIOS to the latest version available from toshiba and
> > tested it with FreeBSD 6, but still with no luck :(
> > 
> > Now if I enable
> > acpi_load="YES"
> > in /boot/loader.conf, I can't boot my FreeBSD as the hard disk ad0
> > doesn't get recognized during boot and the system stops asking me to
> > select the root partition! Which is not available of course.
> > 
> > I'm not sure if I can attache my asl file and send it to the list but I
> > have it ready though if someone is willing to look at it.
> 
> This part is probably the issue:
> > atapci0: <Intel ICH6 SATA150 controller> port
> > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1100-0x110f at device 31.2 on pci0
> > atapci0: failed to enable memory mapping!
> 
> Try booting with:
> debug.acpi.disabled="sysres"
> 
I'm sorry I didn't check your message earlier...
Just a quick question, should I enable acpi_load="YES"
in /boot/loader.conf and add this line as well in the same file?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-acpi/attachments/20051022/d7a30268/attachment.bin