ACPI hang on 6.0-RELEASE on Compaq Proliant ML530 (866MHz Xeon)
Kevin Day
toasty at dragondata.com
Mon Nov 28 14:38:28 GMT 2005
On Nov 28, 2005, at 7:10 AM, John Baldwin wrote:
> On Saturday 26 November 2005 11:18 am, Kevin Day wrote:
>> Hangs on boot after displaying kernel copyright notice with ACPI
>> enabled. Works fine with ACPI disabled.
>>
>> Server has two CPUs, but hang occurs with or without SMP kernel.
>>
>>
>>
>> acpidump at http://www.dragondata.com/~toasty/toasty-ml530.asl
>>
>>
>> dmesg from working config:
>
> Any chance you could use a serial console to capture the dmesg from
> a booth
> with ACPI enabled?
I get as far as:
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
> 1994
> The Regents of the University of California. All rights
> reserved.
> FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005
> root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
before it hangs. I realize that's not much to go on. :)
Since the next thing it should be displaying is the mptable string,
just in case this is relevant, here's the output of mptable:
========================================================================
=======
MPTable
------------------------------------------------------------------------
-------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000f4ff0
signature: '_MP_'
length: 16 bytes
version: 1.4
checksum: 0xdc
mode: Virtual Wire
------------------------------------------------------------------------
-------
MP Config Table Header:
physical address: 0x000f2d88
signature: 'PCMP'
base table length: 508
version: 1.4
checksum: 0xd1
OEM ID: 'COMPAQ '
Product ID: 'PROLIANT '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 55
local APIC address: 0xfee00000
extended table length: 252
extended table checksum: 91
------------------------------------------------------------------------
-------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model
Step Flags
1 0x10 BSP, usable 6 8
3 0x383fbff
0 0x10 AP, usable 6 8
6 0x383fbff
--
Bus: Bus ID Type
0 PCI
2 PCI
5 PCI
15 ISA
--
I/O APICs: APIC ID Version State Address
8 0x11 usable 0xfec00000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC
ID PIN#
INT active-lo level 0
8:A 8 31
INT active-lo level 0
8:B 8 31
INT active-lo level 0
8:C 8 31
INT active-lo level 0
8:D 8 31
INT active-lo level 5
8:A 8 30
INT active-lo level 5
8:B 8 30
INT active-lo level 5
8:C 8 30
INT active-lo level 5
8:D 8 30
INT active-lo level 5
7:A 8 29
INT active-lo level 5
7:B 8 29
INT active-lo level 5
7:C 8 29
INT active-lo level 5
7:D 8 29
INT active-lo level 5
6:A 8 28
INT active-lo level 5
6:B 8 28
INT active-lo level 5
6:C 8 28
INT active-lo level 5
6:D 8 28
INT active-lo level 5
9:A 8 27
INT active-lo level 5
9:B 8 27
INT active-lo level 5
9:C 8 27
INT active-lo level 5
9:D 8 27
INT active-lo level 5
5:A 8 26
INT active-lo level 5
5:B 8 26
INT active-lo level 5
5:C 8 26
INT active-lo level 5
5:D 8 26
INT active-lo level 2
5:A 8 25
INT active-lo level 2
5:B 8 25
INT active-lo level 2
5:C 8 25
INT active-lo level 2
5:D 8 25
INT active-lo level 2
6:A 8 24
INT active-lo level 2
6:B 8 24
INT active-lo level 2
6:C 8 24
INT active-lo level 2
6:D 8 24
INT active-lo level 5
4:A 8 22
INT active-lo level 5
4:B 8 21
INT active-hi edge 15
1 8 1
INT active-hi edge 15
0 8 2
INT active-hi edge 15
3 8 3
INT active-hi edge 15
4 8 4
INT active-hi edge 15
6 8 6
INT active-hi edge 15
7 8 7
INT active-hi edge 15
8 8 8
INT active-lo level 15
9 8 9
INT active-hi edge 15
12 8 12
INT active-lo level 15
13 8 13
INT active-hi edge 15
14 8 14
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC
ID PIN#
ExtINT conforms conforms 15 0
255 0
NMI conforms conforms 15 0
255 1
--
MPTABLE OUT OF ORDER!
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC
ID PIN#
ExtINT conforms conforms 15
0 8 0
------------------------------------------------------------------------
-------
MP Config Extended Table Entries:
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0x1800
address range: 0x1010
--
System Address Space
bus ID: 0 address type: I/O address
address base: 0x0
address range: 0x10000
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xf7d00000
address range: 0x100000
--
System Address Space
bus ID: 0 address type: prefetch address
address base: 0x80000000
address range: 0x77000000
--
System Address Space
bus ID: 2 address type: I/O address
address base: 0x3000
address range: 0x80
--
System Address Space
bus ID: 2 address type: memory address
address base: 0xf7e00000
address range: 0x100000
--
System Address Space
bus ID: 2 address type: prefetch address
address base: 0x0
address range: 0x0
--
System Address Space
bus ID: 5 address type: I/O address
address base: 0x4000
address range: 0x500
--
System Address Space
bus ID: 5 address type: memory address
address base: 0xf7f00000
address range: 0x100000
--
System Address Space
bus ID: 5 address type: prefetch address
address base: 0x0
address range: 0x0
--
System Address Space
bus ID: 0 address type: memory address
address base: 0xa0000
address range: 0x60000
--
Bus Heirarchy
bus ID: 15 bus info: 0x01 parent bus ID: 0
--
Compatibility Bus Address
bus ID: 0 address modifier: add
predefined range: 0x00000000
--
Compatibility Bus Address
bus ID: 2 address modifier: subtract
predefined range: 0x00000000
--
Compatibility Bus Address
bus ID: 5 address modifier: subtract
predefined range: 0x00000000
========================================================================
=======
More information about the freebsd-acpi
mailing list