link_elf: symbol AcpiDmDumpMethodInfo undefined

[fandino]

I get this error when I compile 5.4-PRERELEASE with ACPI_DEBUG.

Did I miss something?

-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.4-PRERELEASE #4: Wed Mar 16 00:45:05 CET 2005
    root at damocles.olimpus:/usr/varios/obj/usr/varios/src/sys/DAMOCLES
link_elf: symbol AcpiDmDumpMethodInfo undefined
KLD file acpi.ko - could not finalize loading
MPTable: <OEM00000 PROD00000000>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm)  (1243.35-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 536805376 (511 MB)
avail memory = 515649536 (491 MB)
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 14 Entries> on motherboard
pci0: <PCI bus> on pcib0
$PIR: No matching entry for 0.1.INTA
$PIR: No matching entry for 0.2.INTA
$PIR: No matching entry for 0.2.INTB
$PIR: No matching entry for 0.2.INTC
agp0: <NVIDIA nForce2 AGP Controller> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xde001000-0xde001fff irq 11 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xde002000-0xde002fff irq 9 at device 2.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xde003000-0xde0030ff irq 10 at device 2.2 on pci0
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: single transaction translator
uhub2: 6 ports with 6 removable, self powered
pcib1: <MPTable PCI-PCI bridge> at device 8.0 on pci0
pci1: <PCI bus> on pcib1
pcib1: unable to route slot 10 INTA
pcib1: unable to route slot 10 INTA
pci1: <display, VGA> at device 8.0 (no driver attached)
pci1: <multimedia, audio> at device 9.0 (no driver attached)
pci1: <input device> at device 9.1 (no driver attached)
pci1: <multimedia, video> at device 10.0 (no driver attached)
pci1: <multimedia> at device 10.1 (no driver attached)
re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0x9c00-0x9cff mem 0xdd006000-0xdd0060ff irq 16 at device 11.0 on pci1
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
re0: Ethernet address: 00:0d:61:78:cf:2f
pci1: <serial bus, FireWire> at device 14.0 (no driver attached)
atapci0: <nVidia nForce2 UDMA133 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 9.0 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pcib2: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <display, VGA> at device 0.0 (no driver attached)
orm0: <ISA Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at