git: 5b2a81f58dc7 - main - mmc: Add mmc-pwrseq driver
Mateusz Guzik
mjguzik at gmail.com
Sun May 23 18:02:13 UTC 2021
This breaks tinderbox, for example buildkernel TARGET_ARCH=armv6
KERNCONF=RPI-B MODULES_OVERRIDE="":
ld: error: undefined symbol: mmc_fdt_parse
>>> referenced by bcm2835_sdhci.c:320 (/usr/src/sys/arm/broadcom/bcm2835/bcm2835_sdhci.c:320)
>>> bcm2835_sdhci.o:(bcm_sdhci_attach)
ld: error: undefined symbol: mmc_fdt_parse
>>> referenced by bcm2835_sdhci.c:320 (/usr/src/sys/arm/broadcom/bcm2835/bcm2835_sdhci.c:320)
>>> bcm2835_sdhci.o:(bcm_sdhci_attach)
On 5/21/21, Emmanuel Vadot <manu at freebsd.org> wrote:
> The branch main has been updated by manu:
>
> URL:
> https://cgit.FreeBSD.org/src/commit/?id=5b2a81f58dc722ca76065536f07ba47efd98dc63
>
> commit 5b2a81f58dc722ca76065536f07ba47efd98dc63
> Author: Emmanuel Vadot <manu at FreeBSD.org>
> AuthorDate: 2021-05-16 12:48:56 +0000
> Commit: Emmanuel Vadot <manu at FreeBSD.org>
> CommitDate: 2021-05-21 15:36:20 +0000
>
> mmc: Add mmc-pwrseq driver
>
> This driver is used to power up sdio card or eMMC.
> It handle the reset-gpio, clocks and needed delays for
> powerup/powerdown.
>
> Sponsored by: Diablotin Systems
> Differential Revision: https://reviews.freebsd.org/D30288
> ---
> sys/conf/files | 2 +
> sys/dev/mmc/mmc_pwrseq.c | 194
> ++++++++++++++++++++++++++++++++++++++++++++
> sys/dev/mmc/mmc_pwrseq_if.m | 38 +++++++++
> 3 files changed, 234 insertions(+)
>
> diff --git a/sys/conf/files b/sys/conf/files
> index 22083169bfc7..70cdd9f68dc6 100644
> --- a/sys/conf/files
> +++ b/sys/conf/files
> @@ -2476,6 +2476,8 @@ dev/mmc/mmcbr_if.m standard
> dev/mmc/mmcbus_if.m standard
> dev/mmc/mmcsd.c optional mmcsd !mmccam
> dev/mmc/mmc_fdt_helpers.c optional mmc fdt | mmccam fdt
> +dev/mmc/mmc_pwrseq.c optional mmc fdt | mmccam fdt
> +dev/mmc/mmc_pwrseq_if.m optional mmc fdt | mmccam fdt
> dev/mmcnull/mmcnull.c optional mmcnull
> dev/mpr/mpr.c optional mpr
> dev/mpr/mpr_config.c optional mpr
> diff --git a/sys/dev/mmc/mmc_pwrseq.c b/sys/dev/mmc/mmc_pwrseq.c
> new file mode 100644
> index 000000000000..d4ccf814fe53
> --- /dev/null
> +++ b/sys/dev/mmc/mmc_pwrseq.c
> @@ -0,0 +1,194 @@
> +/*
> + * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
> + *
> + * Copyright 2021 Emmanuel Vadot <manu at freebsd.org>
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions are
> + * met:
> + *
> + * 1. Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in the
> + * documentation and/or other materials provided with the
> distribution.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
> + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
> + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
> + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE
> + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
> + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
> + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
> + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
> + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
> + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
> + * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#include <sys/cdefs.h>
> +__FBSDID("$FreeBSD$");
> +
> +#include <sys/param.h>
> +#include <sys/bus.h>
> +#include <sys/kernel.h>
> +#include <sys/module.h>
> +#include <sys/gpio.h>
> +
> +#include <dev/gpio/gpiobusvar.h>
> +#include <dev/ofw/ofw_bus.h>
> +#include <dev/ofw/ofw_bus_subr.h>
> +
> +#include <dev/extres/clk/clk.h>
> +
> +#include "mmc_pwrseq_if.h"
> +
> +enum pwrseq_type {
> + PWRSEQ_SIMPLE = 1,
> + PWRSEQ_EMMC,
> +};
> +
> +static struct ofw_compat_data compat_data[] = {
> + { "mmc-pwrseq-simple", PWRSEQ_SIMPLE },
> + { "mmc-pwrseq-emmc", PWRSEQ_EMMC },
> + { NULL, 0 }
> +};
> +
> +struct mmc_pwrseq_softc {
> + enum pwrseq_type type;
> + clk_t ext_clock;
> + struct gpiobus_pin *reset_gpio;
> +
> + uint32_t post_power_on_delay_ms;
> + uint32_t power_off_delay_us;
> +};
> +
> +static int
> +mmc_pwrseq_probe(device_t dev)
> +{
> + enum pwrseq_type type;
> +
> + if (!ofw_bus_search_compatible(dev, compat_data)->ocd_data)
> + return (ENXIO);
> +
> + type = (enum pwrseq_type)ofw_bus_search_compatible(dev,
> compat_data)->ocd_data;
> + switch (type) {
> + case PWRSEQ_SIMPLE:
> + device_set_desc(dev, "MMC Simple Power sequence");
> + break;
> + case PWRSEQ_EMMC:
> + device_set_desc(dev, "MMC eMMC Power sequence");
> + break;
> + }
> + return (BUS_PROBE_DEFAULT);
> +}
> +
> +static int
> +mmc_pwrseq_attach(device_t dev)
> +{
> + struct mmc_pwrseq_softc *sc;
> + phandle_t node;
> + int rv;
> +
> + sc = device_get_softc(dev);
> + sc->type = (enum pwrseq_type)ofw_bus_search_compatible(dev,
> compat_data)->ocd_data;
> + node = ofw_bus_get_node(dev);
> +
> + if (sc->type == PWRSEQ_SIMPLE) {
> + if (OF_hasprop(node, "clocks")) {
> + rv = clk_get_by_ofw_name(dev, 0, "ext_clock", &sc->ext_clock);
> + if (rv != 0) {
> + device_printf(dev,
> + "Node have a clocks property but no clocks named
> \"ext_clock\"\n");
> + return (ENXIO);
> + }
> + }
> + OF_getencprop(node, "post-power-on-delay-ms",
> &sc->post_power_on_delay_ms, sizeof(uint32_t));
> + OF_getencprop(node, "power-off-delay-us", &sc->power_off_delay_us,
> sizeof(uint32_t));
> + }
> +
> + if (OF_hasprop(node, "reset-gpios")) {
> + if (gpio_pin_get_by_ofw_property(dev, node, "reset-gpios",
> + &sc->reset_gpio) != 0) {
> + device_printf(dev, "Cannot get the reset-gpios\n");
> + return (ENXIO);
> + }
> + gpio_pin_setflags(sc->reset_gpio, GPIO_PIN_OUTPUT);
> + gpio_pin_set_active(sc->reset_gpio, true);
> + }
> +
> + OF_device_register_xref(OF_xref_from_node(node), dev);
> + return (0);
> +}
> +
> +static int
> +mmc_pwrseq_detach(device_t dev)
> +{
> +
> + return (EBUSY);
> +}
> +
> +static int
> +mmv_pwrseq_set_power(device_t dev, bool power_on)
> +{
> + struct mmc_pwrseq_softc *sc;
> + int rv;
> +
> + sc = device_get_softc(dev);
> +
> + if (power_on) {
> + if (sc->ext_clock) {
> + rv = clk_enable(sc->ext_clock);
> + if (rv != 0)
> + return (rv);
> + }
> +
> + if (sc->reset_gpio) {
> + rv = gpio_pin_set_active(sc->reset_gpio, false);
> + if (rv != 0)
> + return (rv);
> + }
> +
> + if (sc->post_power_on_delay_ms)
> + DELAY(sc->post_power_on_delay_ms * 1000);
> + } else {
> + if (sc->reset_gpio) {
> + rv = gpio_pin_set_active(sc->reset_gpio, true);
> + if (rv != 0)
> + return (rv);
> + }
> +
> + if (sc->ext_clock) {
> + rv = clk_stop(sc->ext_clock);
> + if (rv != 0)
> + return (rv);
> + }
> + if (sc->power_off_delay_us)
> + DELAY(sc->power_off_delay_us);
> + }
> +
> + return (0);
> +}
> +
> +static device_method_t mmc_pwrseq_methods[] = {
> + /* Device interface */
> + DEVMETHOD(device_probe, mmc_pwrseq_probe),
> + DEVMETHOD(device_attach, mmc_pwrseq_attach),
> + DEVMETHOD(device_detach, mmc_pwrseq_detach),
> +
> + DEVMETHOD(mmc_pwrseq_set_power, mmv_pwrseq_set_power),
> + DEVMETHOD_END
> +};
> +
> +static driver_t mmc_pwrseq_driver = {
> + "mmc_pwrseq",
> + mmc_pwrseq_methods,
> + sizeof(struct mmc_pwrseq_softc),
> +};
> +
> +static devclass_t mmc_pwrseq_devclass;
> +
> +EARLY_DRIVER_MODULE(mmc_pwrseq, simplebus, mmc_pwrseq_driver,
> mmc_pwrseq_devclass, 0, 0,
> + BUS_PASS_SUPPORTDEV + BUS_PASS_ORDER_FIRST);
> +MODULE_VERSION(mmc_pwrseq, 1);
> +SIMPLEBUS_PNP_INFO(compat_data);
> diff --git a/sys/dev/mmc/mmc_pwrseq_if.m b/sys/dev/mmc/mmc_pwrseq_if.m
> new file mode 100644
> index 000000000000..e94b44052c20
> --- /dev/null
> +++ b/sys/dev/mmc/mmc_pwrseq_if.m
> @@ -0,0 +1,38 @@
> +#-
> +# SPDX-License-Identifier: BSD-2-Clause-FreeBSD
> +#
> +# Copyright (c) 2021 Emmanuel Vadot <manu at FreeBSD.org>
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +# 1. Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# 2. Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in the
> +# documentation and/or other materials provided with the distribution.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
> +# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
> +# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
> PURPOSE
> +# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
> +# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
> CONSEQUENTIAL
> +# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> +# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> +# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
> STRICT
> +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
> WAY
> +# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
> +# SUCH DAMAGE.
> +#
> +# $FreeBSD$
> +#
> +
> +INTERFACE mmc_pwrseq;
> +
> +#
> +# Power up/down the card
> +#
> +METHOD int set_power {
> + device_t bus;
> + bool power_on;
> +};
>
--
Mateusz Guzik <mjguzik gmail.com>
More information about the dev-commits-src-main
mailing list