git: e2ea6942ab31 - main - mpsutil: extend show adapter information, add NCQ control
Andriy Gapon
avg at FreeBSD.org
Fri May 7 12:22:57 UTC 2021
The branch main has been updated by avg:
URL: https://cgit.FreeBSD.org/src/commit/?id=e2ea6942ab316d4cd5c2fef73ab28dc974b8dc51
commit e2ea6942ab316d4cd5c2fef73ab28dc974b8dc51
Author: Daniel Austin <freebsd-ports at dan.me.uk>
AuthorDate: 2021-05-07 11:41:53 +0000
Commit: Andriy Gapon <avg at FreeBSD.org>
CommitDate: 2021-05-07 12:22:22 +0000
mpsutil: extend show adapter information, add NCQ control
'show adapter' now shows PCIe width and speed, IOC Speed, and the
temperature of the controller.
A new command, 'set ncq', is added.
It enables or disables SATA NCQ in the NVRAM of the card.
Its current setting is added to 'show adapter' as well.
PR: 254841
MFC after: 2 weeks
Relnotes: perhaps
---
usr.sbin/mpsutil/Makefile | 2 +-
usr.sbin/mpsutil/mps_set.c | 129 ++++++++++++++++++++++++++++++++++++++++++++
usr.sbin/mpsutil/mps_show.c | 34 ++++++++++++
usr.sbin/mpsutil/mpsutil.8 | 8 ++-
4 files changed, 171 insertions(+), 2 deletions(-)
diff --git a/usr.sbin/mpsutil/Makefile b/usr.sbin/mpsutil/Makefile
index dd99f5814565..0bc981366650 100644
--- a/usr.sbin/mpsutil/Makefile
+++ b/usr.sbin/mpsutil/Makefile
@@ -1,7 +1,7 @@
# $FreeBSD$
PROG= mpsutil
-SRCS= mps_cmd.c mps_debug.c mps_flash.c mps_show.c mps_slot.c mpsutil.c
+SRCS= mps_cmd.c mps_debug.c mps_flash.c mps_set.c mps_show.c mps_slot.c mpsutil.c
MAN= mpsutil.8
WARNS?= 3
diff --git a/usr.sbin/mpsutil/mps_set.c b/usr.sbin/mpsutil/mps_set.c
new file mode 100644
index 000000000000..91e4d23ab78d
--- /dev/null
+++ b/usr.sbin/mpsutil/mps_set.c
@@ -0,0 +1,129 @@
+/*-
+ * SPDX-License-Identifier: BSD-2-Clause
+ *
+ * Copyright (c) 2021 Daniel Austin <freebsd-ports at dan.me.uk>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__RCSID("$FreeBSD$");
+
+#include <sys/param.h>
+#include <sys/errno.h>
+#include <err.h>
+#include <libutil.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include "mpsutil.h"
+
+static int set_ncq(int ac, char **av);
+
+MPS_TABLE(top, set);
+
+static int
+set_ncq(int ac, char **av)
+{
+ MPI2_CONFIG_PAGE_HEADER header;
+ MPI2_CONFIG_PAGE_IO_UNIT_1 *iounit1;
+ MPI2_CONFIG_REQUEST req;
+ MPI2_CONFIG_REPLY reply;
+ int error, fd;
+
+ bzero(&req, sizeof(req));
+ bzero(&header, sizeof(header));
+ bzero(&reply, sizeof(reply));
+
+ fd = mps_open(mps_unit);
+ if (fd < 0) {
+ error = errno;
+ warn("mps_open");
+ return (error);
+ }
+
+ error = mps_read_config_page_header(fd, MPI2_CONFIG_PAGETYPE_IO_UNIT, 1, 0,
+ &header, NULL);
+ if (error) {
+ error = errno;
+ warn("Failed to get IOUNIT page 1 header");
+ return (error);
+ }
+
+ iounit1 = mps_read_config_page(fd, MPI2_CONFIG_PAGETYPE_IO_UNIT, 1, 0, NULL);
+ if (iounit1 == NULL) {
+ error = errno;
+ warn("Failed to get IOUNIT page 1 info");
+ return (error);
+ }
+
+ if (ac == 1) {
+ /* just show current setting */
+ printf("SATA Native Command Queueing is currently: %s\n",
+ ((iounit1->Flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE) == 0) ?
+ "ENABLED" : "DISABLED");
+ } else if (ac == 2) {
+ if (!strcasecmp(av[1], "enable") || !strcmp(av[1], "1")) {
+ iounit1->Flags &= ~MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE;
+ } else if (!strcasecmp(av[1], "disable") || !strcmp(av[1], "0")) {
+ iounit1->Flags |= MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE;
+ } else {
+ free(iounit1);
+ error = EINVAL;
+ warn("set ncq: Only 'enable' and 'disable' allowed.");
+ return (EINVAL);
+ }
+ req.Function = MPI2_FUNCTION_CONFIG;
+ req.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
+ req.ExtPageLength = 0;
+ req.ExtPageType = 0;
+ req.Header = header;
+ req.PageAddress = 0;
+ if (mps_pass_command(fd, &req, sizeof(req) - sizeof(req.PageBufferSGE), &reply, sizeof(reply),
+ NULL, 0, iounit1, sizeof(iounit1), 30) != 0) {
+ free(iounit1);
+ error = errno;
+ warn("Failed to update config page");
+ return (error);
+ }
+ if (!IOC_STATUS_SUCCESS(reply.IOCStatus)) {
+ free(iounit1);
+ error = errno;
+ warn("%s", mps_ioc_status(reply.IOCStatus));
+ return (error);
+ }
+ printf("NCQ setting accepted. It may not take effect until the controller is reset.\n");
+ } else {
+ free(iounit1);
+ errno = EINVAL;
+ warn("set ncq: too many arguments");
+ return (EINVAL);
+ }
+ free(iounit1);
+
+ close(fd);
+ return (0);
+}
+
+MPS_COMMAND(set, ncq, set_ncq, "[enable|disable]", "set SATA NCQ function")
+
diff --git a/usr.sbin/mpsutil/mps_show.c b/usr.sbin/mpsutil/mps_show.c
index 620bb5e27f89..7c2596497818 100644
--- a/usr.sbin/mpsutil/mps_show.c
+++ b/usr.sbin/mpsutil/mps_show.c
@@ -59,12 +59,18 @@ MPS_TABLE(top, show);
static int
show_adapter(int ac, char **av)
{
+ const char* pcie_speed[] = { "2.5", "5.0", "8.0" };
+ const char* temp_units[] = { "", "F", "C" };
+ const char* ioc_speeds[] = { "", "Full", "Half", "Quarter", "Eighth" };
+
MPI2_CONFIG_PAGE_SASIOUNIT_0 *sas0;
MPI2_CONFIG_PAGE_SASIOUNIT_1 *sas1;
MPI2_SAS_IO_UNIT0_PHY_DATA *phy0;
MPI2_SAS_IO_UNIT1_PHY_DATA *phy1;
MPI2_CONFIG_PAGE_MAN_0 *man0;
MPI2_CONFIG_PAGE_BIOS_3 *bios3;
+ MPI2_CONFIG_PAGE_IO_UNIT_1 *iounit1;
+ MPI2_CONFIG_PAGE_IO_UNIT_7 *iounit7;
MPI2_IOC_FACTS_REPLY *facts;
U16 IOCStatus;
char *speed, *minspeed, *maxspeed, *isdisabled, *type;
@@ -126,6 +132,34 @@ show_adapter(int ac, char **av)
? "yes" : "no");
free(facts);
+ iounit1 = mps_read_config_page(fd, MPI2_CONFIG_PAGETYPE_IO_UNIT, 1, 0, NULL);
+ if (iounit1 == NULL) {
+ error = errno;
+ warn("Failed to get IOUNIT page 1 info");
+ return (error);
+ }
+ printf(" SATA NCQ: %s\n",
+ ((iounit1->Flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE) == 0) ?
+ "ENABLED" : "DISABLED");
+ free(iounit1);
+
+ iounit7 = mps_read_config_page(fd, MPI2_CONFIG_PAGETYPE_IO_UNIT, 7, 0, NULL);
+ if (iounit7 == NULL) {
+ error = errno;
+ warn("Failed to get IOUNIT page 7 info");
+ return (error);
+ }
+ printf(" PCIe Width/Speed: x%d (%s GB/sec)\n", iounit7->PCIeWidth,
+ pcie_speed[iounit7->PCIeSpeed]);
+ printf(" IOC Speed: %s\n", ioc_speeds[iounit7->IOCSpeed]);
+ printf(" Temperature: ");
+ if (iounit7->IOCTemperatureUnits == MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT)
+ printf("Unknown/Unsupported\n");
+ else
+ printf("%d %s\n", iounit7->IOCTemperature,
+ temp_units[iounit7->IOCTemperatureUnits]);
+ free(iounit7);
+
fd = mps_open(mps_unit);
if (fd < 0) {
error = errno;
diff --git a/usr.sbin/mpsutil/mpsutil.8 b/usr.sbin/mpsutil/mpsutil.8
index 1bb7c4d5eaec..e7c2fda8f84e 100644
--- a/usr.sbin/mpsutil/mpsutil.8
+++ b/usr.sbin/mpsutil/mpsutil.8
@@ -24,7 +24,7 @@
.\"
.\" $FreeBSD$
.\"
-.Dd March 25, 2021
+.Dd May 7, 2021
.Dt MPSUTIL 8
.Os
.Sh NAME
@@ -62,6 +62,10 @@
.Cm show iocfacts
.Nm
.Op Fl u Ar unit
+.Cm set ncq
+.Op Ar enable Ns | Ns Ar disable
+.Nm
+.Op Fl u Ar unit
.Cm flash save
.Op Ar firmware Ns | Ns Ar bios
.Op Ar file
@@ -134,6 +138,8 @@ Dump raw config page in hex.
.Pp
Controller management commands include:
.Bl -tag -width indent
+.It Cm set ncq Oo Ar enable Ns | Ns Ar disable Oc
+Enables or disables NCQ in the NVRAM of the card.
.It Cm flash save Oo Ar firmware Ns | Ns Ar bios Oc Op Ar file
Save the
.Ar firmware
More information about the dev-commits-src-main
mailing list