git: 498c30285c9e - main - net-im/scli: Update to 0.6.4

[Mateusz Piotrowski]

The branch main has been updated by 0mp:

URL: https://cgit.FreeBSD.org/ports/commit/?id=498c30285c9e329ccf4bfc84a7a7b544a89f042c

commit 498c30285c9e329ccf4bfc84a7a7b544a89f042c
Author:     Mateusz Piotrowski <0mp at FreeBSD.org>
AuthorDate: 2021-07-08 09:18:54 +0000
Commit:     Mateusz Piotrowski <0mp at FreeBSD.org>
CommitDate: 2021-07-08 10:35:38 +0000

    net-im/scli: Update to 0.6.4
    
    Remove pkg-message. The workaround is no longer relevant as the bug has
    been fixed.
    
    Changes:        https://github.com/isamert/scli/releases/tag/v0.6.4
---
 net-im/scli/Makefile    |  2 +-
 net-im/scli/distinfo    |  6 +++---
 net-im/scli/pkg-message | 20 --------------------
 3 files changed, 4 insertions(+), 24 deletions(-)

diff --git a/net-im/scli/Makefile b/net-im/scli/Makefile
index 5266e4cb76e2..55342fa46021 100644
--- a/net-im/scli/Makefile
+++ b/net-im/scli/Makefile
@@ -1,6 +1,6 @@
 PORTNAME=	scli
 DISTVERSIONPREFIX=	v
-DISTVERSION=	0.6.3
+DISTVERSION=	0.6.4
 CATEGORIES=	net-im python
 
 MAINTAINER=	0mp at FreeBSD.org
diff --git a/net-im/scli/distinfo b/net-im/scli/distinfo
index fe032c319dbb..0f2375a31421 100644
--- a/net-im/scli/distinfo
+++ b/net-im/scli/distinfo
@@ -1,3 +1,3 @@
-TIMESTAMP = 1624382216
-SHA256 (isamert-scli-v0.6.3_GH0.tar.gz) = 2cf0743484e1add2ce7ef7e48a228337db26a718e48f93b686d46882a31d467b
-SIZE (isamert-scli-v0.6.3_GH0.tar.gz) = 139647
+TIMESTAMP = 1625735833
+SHA256 (isamert-scli-v0.6.4_GH0.tar.gz) = 867e45b10cd9ae0acff99c14c3570d95f54a5c9ca770d786e1e5689c8158ff3f
+SIZE (isamert-scli-v0.6.4_GH0.tar.gz) = 139743
diff --git a/net-im/scli/pkg-message b/net-im/scli/pkg-message
deleted file mode 100644
index b553d1502b8d..000000000000
--- a/net-im/scli/pkg-message
+++ /dev/null
@@ -1,20 +0,0 @@
-[
-{ type: install
-message: <<EOM
-Sometimes, scli does not show the contact list immediately (e.g., after scli
-was not closed by issuing ":quit" but by sending SIGINT instead). In such a
-situation, it might be necessary to refresh scli by issuing ":reload".
-
-In case it is not enough, the following instructions explain how to clean up
-existing scli and signal-cli files and start again:
-
-1. Remove ~/.local/share/scli and ~/.local/share/signal-cli.
-2. Register (or link) the machine again with signal-cli.
-3. Start scli and let it run for a couple of seconds (so that the signal-cli
-   daemon can synchronize with the Signal servers).
-4. Issue a ":reload" command in the scli prompt.
-
-The contact list should now be visible.
-EOM
-}
-]