cvs commit: src Makefile.inc1 src/gnu/lib Makefile src/gnu/lib/csu Makefile src/gnu/lib/libssp Makefile src/lib/csu Makefile.inc src/lib/libc Makefile src/lib/libstand Makefile src/lib/libthr Makefile src/libexec/rtld-elf Makefile src/release Makefile ...

[Bernd Walter]

On Wed, Jul 16, 2008 at 12:54:46AM +0200, Bernd Walter wrote:
> On Wed, Jul 16, 2008 at 02:13:22AM +0400, Stanislav Sedov wrote:
> > On Tue, 15 Jul 2008 23:05:14 +0200
> > Bernd Walter <ticso at cicely7.cicely.de> mentioned:
> > 
> > > On Mon, Jul 14, 2008 at 11:48:09PM +0400, Stanislav Sedov wrote:
> > > > On Fri, 11 Jul 2008 23:19:09 +0200
> > > > Jeremie Le Hen <jeremie at le-hen.org> mentioned:
> > > > 
> > > > > Would you mind testing it with WITHOUT_SSP= at the top of lib/libc/Makefile?
> > > > > 
> > > > 
> > > > I'll try tomorrow. Currently, I have no access to the board.
> > > 
> > > Is it this kind of problem:
> > > ipfw2 (+ipv6) initialized, divert enabled, nat enabled, rule-based forwarding enabled, default to accept, logging unlimited
> > > SD CARD: 1023934464 bytes
> > > mmcsd0: <mmc or sd flash card> on mmc0
> > > mmc0: setting transfer rate to 30.000MHz
> > > Trying to mount root from ufs:/dev/mmcsd0s1a
> > > pid 20 (sh), uid 0: exited on signal 11
> > > Jul 15 23:01:14 init: /bin/sh on /etc/rc terminated abnormally, going to single user mode
> > > Enter full pathname of shell or RETURN for /bin/sh: 
> > > 
> > > This happens for me with recent kernel and few days old 7-stable
> > > userland, so it shouldn't have anything to do with installed libc.
> > > 
> > 
> > Seems to be the same problem. However, it seems that just using libc
> > compiled w/out SSP solves it, although I haven't tested the entire
> > world yet.
> 
> Mmm...
> But don't have the SSP change at all, since I still have a 7-stable
> userland.
> Static compiled binaries (/rescue) works fine.

Strange enough disabling SSP did make a difference, but I still have
problems at some point:

Trying to mount root from ufs:/dev/mmcsd0s1a
Loading configuration files.
usb_new_device: set address 2 failed - trying a port reset
No suitable dump device was found.
usb_new_device: set address 2 failed - trying a port reset
Entropy harvesting: interrupts ethernet point_to_pointusb_new_device: set address 2 failed - trying a port reset
usbd_new_device: addr=2, getting first desc failed
uhub_explore: usb_new_device failed, error=IOERROR
uhub0: device problem (IOERROR), disabling port 2
 kickstart.
swapon: adding /dev/mmcsd0s1b as swap device
Starting file system checks:
/dev/mmcsd0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/mmcsd0s1a: clean, 264157 free (25021 frags, 29892 blocks, 6.0% fragmentation)
pid 59 (mount), uid 0: exited on signal 11 (core dumped)
Segmentation fault (core dumped)
Mounting root filesystem rw failed, startup aborted
ERROR: ABORTING BOOT (sending SIGTERM to parent)!
Jul 17 16:04:26 init: /bin/sh on /etc/rc terminated abnormally, going to single user mode
Enter full pathname of shell or RETURN for /bin/sh: 

I'll try more recent code.
Maybe I got something bad.

-- 
B.Walter <bernd at bwct.de> http://www.bwct.de
Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm.