cvs commit: src/sys/dev/bce if_bce.c src/sys/dev/em if_em.c
if_em.h src/sys/dev/mpt mpt.h mpt_pci.c
Pawel Worach
pawel.worach at gmail.com
Sat Nov 18 15:07:47 UTC 2006
Pawel Worach wrote:
>> So em triggered an interrupt and you got an NMI out of it instead. What
>> does 'show lapic' show?
>>
>
> db> show lapic
> lapic ID = 0
> version = 1.4
> max LVT = 5
> SVR = ff (enabled)
> TPR = 00
> In-service Interrupts:
> TMR Interrupts:
> IRR Interrupts:
>
I reverted MSI support from em(4) just to see what would happen to
mpt(4), no NMI fires but mpt hardware seems to go off to la-la land.
OK boot -v
/boot/kernel/acpi.ko text=0x4d134 data=0x2540+0x1010
syms=[0x4+0x7cb0+0x4+0xaa13]
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=000000000009d400
SMAP type=02 base=000000000009d400 len=0000000000002c00
SMAP type=02 base=00000000000e0000 len=0000000000020000
SMAP type=01 base=0000000000100000 len=000000003fedb2c0
SMAP type=02 base=000000003ffe0000 len=0000000000020000
SMAP type=03 base=000000003ffdb2c0 len=0000000000004d40
SMAP type=02 base=00000000fec00000 len=0000000001400000
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #0: Sat Nov 18 15:53:48 CET 2006
root at zero:/usr/obj/usr/src/sys/ZERO
Using 16 colors for the VM-PQ tuning (512, 8)
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08e2000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08e216c.
MP Configuration Table version 1.4 found at 0xc009e2a0
Table 'FACP' at 0x3ffdff00
Table 'APIC' at 0x3ffdfe40
MADT: Found table at 0x3ffdfe40
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 6 ACPI ID 1: enabled
SMP: Added CPU 6 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 7 ACPI ID 3: enabled
SMP: Added CPU 7 (AP)
INTR: Adding local APIC 0 as a target
ACPI APIC Table: <IBM SERONYXP>
Calibrating clock(s) ... i8254 clock: 1193163 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2793892316 Hz
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.89-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4400<CNTX-ID,XTPR>
Logical CPUs per core: 2
Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 64 entries
Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries
1st-level data cache: 8 KB, 4-way set associative, sectored cache, 64
byte line size
Trace cache: 12K-uops, 8-way set associative
2nd-level cache: 512 KB, 8-way set associative, sectored cache, 64 byte
line size
real memory = 1073590272 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c28000 - 0x000000003ed92fff, 1041674240 bytes (254315 pages)
avail memory = 1041293312 (993 MB)
INTR: Adding local APIC 6 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
bios32: Found BIOS32 Service Directory header at 0xc00fd790
bios32: Entry = 0xfd7a1 (c00fd7a1) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xd7dc
pnpbios: Found PnP BIOS data at 0xc00fdf90
pnpbios: Entry = f0000:440f Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 2
APIC: CPU 2 has ACPI ID 1
APIC: CPU 3 has ACPI ID 3
Security auditing service present
BSM auditing present
MADT: Found IO APIC ID 14, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 13, Interrupt 16 at 0xfec01000
MADT: Found IO APIC ID 12, Interrupt 32 at 0xfec02000
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
lapic0: Routing NMI -> LINT1
MADT: Ignoring local NMI routed to ACPI CPU 6
lapic6: Routing NMI -> LINT1
MADT: Ignoring local NMI routed to ACPI CPU 7
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 3 polarity: low
ioapic0: intpin 3 trigger: level
ioapic2 <Version 1.1> irqs 32-47 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic0 <Version 1.1> irqs 0-15 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
io: <I/O>
npx0: INT 16 interface
acpi0: <IBM SERONYXP> on motherboard
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80002800
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00141166)
pcibios: BIOS version 2.10
AcpiOsDerivePciId: bus 0 dev 15 func 2
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xd7a92000 pa 0x9c000
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 16 func 0
AcpiOsDerivePciId: bus 0 dev 16 func 2
AcpiOsDerivePciId: bus 0 dev 17 func 0
AcpiOsDerivePciId: bus 0 dev 17 func 2
acpi0: reservation of 460, 2 (4) failed
ACPI timer: 1/2 0/3 1/2 1/2 0/3 1/2 1/2 1/2 1/2 1/2 -> 8
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x488-0x48b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 10
Validation 0 10 N 0 10
After Disable 0 255 N 0 10
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link8: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link9: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link10: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 10
Validation 0 10 N 0 10
After Disable 0 255 N 0 10
pci_link11: Index IRQ Rtd Ref IRQs
Initial Probe 0 9 N 0 9
Validation 0 9 N 0 9
After Disable 0 255 N 0 9
pci_link12: Index IRQ Rtd Ref IRQs
Initial Probe 0 9 N 0 9
Validation 0 9 N 0 9
After Disable 0 255 N 0 9
pci_link13: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 11
Validation 0 11 N 0 11
After Disable 0 255 N 0 11
pci_link14: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 3
Validation 0 3 N 0 3
After Disable 0 255 N 0 3
pci_link15: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link16: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link17: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link18: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link19: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link20: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link21: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link22: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link23: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link24: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link25: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link26: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link27: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link28: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link29: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link30: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link31: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link32: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 11
Validation 0 11 N 0 11
After Disable 0 255 N 0 11
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
ACPI: Found matching pin for 0.15.INTA at func 2: 11
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1166, dev=0x0014, revid=0x33
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0014, revid=0x00
bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0014, revid=0x00
bus=0, slot=0, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=0, slot=6, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 0xfd000000, size 24, enabled
map[14]: type 4, range 32, base 0x2400, size 8, enabled
map[18]: type 1, range 32, base 0xfebff000, size 12, enabled
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 26
found-> vendor=0x1166, dev=0x0201, revid=0x93
bus=0, slot=15, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x2200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0212, revid=0x93
bus=0, slot=15, func=1
class=01-01-82, hdrtype=0x00, mfdev=1
cmdreg=0x0155, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0x700, size 4, enabled
found-> vendor=0x1166, dev=0x0220, revid=0x05
bus=0, slot=15, func=2
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=11
map[10]: type 1, range 32, base 0xfebfe000, size 12, enabled
pcib0: matched entry for 0.15.INTA (src \LPUS:0)
ioapic0: Changing trigger for pin 11 to level
ioapic0: Changing polarity for pin 11 to low
pcib0: slot 15 INTA routed to irq 11 via \LPUS
found-> vendor=0x1166, dev=0x0225, revid=0x00
bus=0, slot=15, func=3
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0144, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0101, revid=0x05
bus=0, slot=16, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0142, statreg=0x22b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0101, revid=0x05
bus=0, slot=16, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0142, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0101, revid=0x05
bus=0, slot=17, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0142, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0101, revid=0x05
bus=0, slot=17, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0142, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
vgapci0: <VGA-compatible display> port 0x2400-0x24ff mem
0xfd000000-0xfdffffff,0xfebff000-0xfebfffff irq 26 at device 6.0 on pci0
atapci0: <ServerWorks CSB5 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x700-0x70f at device 15.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x700
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 49
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 50
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 15.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib1
pci2: physical bus=2
found-> vendor=0x8086, dev=0x1229, revid=0x0c
bus=2, slot=3, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38
(14000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 0xfbfff000, size 12, enabled
map[14]: type 4, range 32, base 0x2500, size 6, enabled
map[18]: type 1, range 32, base 0xfbfc0000, size 17, enabled
pcib1: matched entry for 2.3.INTA
pcib1: slot 3 INTA hardwired to IRQ 20
fxp0: <Intel 82550 Pro/100 Ethernet> port 0x2500-0x253f mem
0xfbfff000-0xfbffffff,0xfbfc0000-0xfbfdffff irq 20 at device 3.0 on pci2
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfbfff000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 1014 01f1 000c
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:0e:0c:2e:98:88
ioapic1: routing intpin 4 (PCI IRQ 20) to vector 51
fxp0: [MPSAFE]
pcib2: <ACPI Host-PCI bridge> on acpi0
pci4: <ACPI PCI bus> on pcib2
pci4: physical bus=4
pcib3: <ACPI Host-PCI bridge> on acpi0
pci6: <ACPI PCI bus> on pcib3
pci6: physical bus=6
found-> vendor=0x8086, dev=0x1010, revid=0x01
bus=6, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base 0xf9fe0000, size 17, enabled
map[20]: type 4, range 32, base 0x2540, size 6, enabled
pcib3: matched entry for 6.8.INTA
pcib3: slot 8 INTA hardwired to IRQ 29
found-> vendor=0x8086, dev=0x1010, revid=0x01
bus=6, slot=8, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=b, irq=3
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base 0xf9fc0000, size 17, enabled
map[20]: type 4, range 32, base 0x2580, size 6, enabled
pcib3: matched entry for 6.8.INTB
pcib3: slot 8 INTB hardwired to IRQ 30
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0x2540-0x257f mem 0xf9fe0000-0xf9ffffff irq 29 at device 8.0 on pci6
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xf9fe0000
em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0x2540
em0: bpf attached
em0: Ethernet address: 00:0d:60:1a:4f:c6
ioapic1: routing intpin 13 (PCI IRQ 29) to vector 52
em0: [FAST]
em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0x2580-0x25bf mem 0xf9fc0000-0xf9fdffff irq 30 at device 8.1 on pci6
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xf9fc0000
em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0x2580
em1: bpf attached
em1: Ethernet address: 00:0d:60:1a:4f:c7
ioapic1: routing intpin 14 (PCI IRQ 30) to vector 53
em1: [FAST]
pcib4: <ACPI Host-PCI bridge> on acpi0
pci8: <ACPI PCI bus> on pcib4
pci8: physical bus=8
found-> vendor=0x1000, dev=0x0030, revid=0x07
bus=8, slot=7, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x48 (2160 ns), mingnt=0x11 (4250 ns), maxlat=0x12
(4500 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 4, range 32, base 0x2600, size 8, enabled
map[14]: type 1, range 64, base 0xf7ff0000, size 16, enabled
map[1c]: type 1, range 64, base 0xf7fe0000, size 16, enabled
pcib4: matched entry for 8.7.INTA
pcib4: slot 7 INTA hardwired to IRQ 27
found-> vendor=0x1000, dev=0x0030, revid=0x07
bus=8, slot=7, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x48 (2160 ns), mingnt=0x11 (4250 ns), maxlat=0x12
(4500 ns)
intpin=b, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 4, range 32, base 0x2700, size 8, enabled
map[14]: type 1, range 64, base 0xf7fd0000, size 16, enabled
map[1c]: type 1, range 64, base 0xf7fc0000, size 16, enabled
pcib4: matched entry for 8.7.INTB
pcib4: slot 7 INTB hardwired to IRQ 28
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2600-0x26ff mem
0xf7ff0000-0xf7ffffff,0xf7fe0000-0xf7feffff irq 27 at device 7.0 on pci8
mpt0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x2600
mpt0: Reserved 0x10000 bytes for rid 0x14 type 3 at 0xf7ff0000
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.2.15.0
mpt0: Capabilities: ( RAID-1 SAFTE )
mpt0: 1 Active Volume (1 Max)
mpt0: 2 Hidden Drive Members (6 Max)
mpt0: Device not running
mpt mailbox: (0x40008112) State Fault WhoInit No One
mpt0: mpt_wait_req(4) timed out
mpt0: read_cfg_header timed out
mpt0: personality mpt_cam attached but would not enable (5)
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x2700-0x27ff mem
0xf7fd0000-0xf7fdffff,0xf7fc0000-0xf7fcffff irq 28 at device 7.1 on pci8
mpt1: Reserved 0x100 bytes for rid 0x10 type 4 at 0x2700
mpt1: Reserved 0x10000 bytes for rid 0x14 type 3 at 0xf7fd0000
mpt1: [GIANT-LOCKED]
mpt1: soft reset failed: ack timeout
mpt1: WARNING - Failed hard reset! Trying to initialize anyway.
mpt1: mpt_reset: failed hard reset (0:0)
mpt1: WARNING - Failed hard reset! Trying to initialize anyway.
mpt1: mpt_reset: failed hard reset (0:1)
mpt1: WARNING - Failed hard reset! Trying to initialize anyway.
mpt1: mpt_reset: failed hard reset (0:2)
mpt1: WARNING - Failed hard reset! Trying to initialize anyway.
mpt1: mpt_reset: failed hard reset (0:3)
mpt1: WARNING - Failed hard reset! Trying to initialize anyway.
mpt1: mpt_reset: failed hard reset (0:4)
mpt1: soft reset failed: device not running
mpt1: WARNING - Failed hard reset! Trying to initialize anyway.
mpt1: mpt_reset: failed hard reset (1:0)
mpt1: WARNING - Failed hard reset! Trying to initialize anyway.
mpt1: mpt_reset: failed hard reset (1:1)
mpt1: WARNING - Failed hard reset! Trying to initialize anyway.
mpt1: mpt_reset: failed hard reset (1:2)
mpt1: WARNING - Failed hard reset! Trying to initialize anyway.
...
--
Pawel
More information about the cvs-src
mailing list