cvs commit: src/sys/sys ata.h src/sys/conf files kmod.mk options
src/sys/dev/ata ata-all.c ata-all.h ata-card.c ata-cbus.c
ata-chipset.c ata-commands.h ata-disk.c ata-disk.h ata-dma.c
ata-isa.c ata-lowlevel.c ata-pci.c ata-pci.h ata-queue.c ...
Søren Schmidt
sos at FreeBSD.org
Wed Mar 30 04:03:41 PST 2005
sos 2005-03-30 12:03:40 UTC
FreeBSD src repository
Modified files:
sys/sys ata.h
sys/conf files kmod.mk options
sys/dev/ata ata-all.c ata-all.h ata-card.c ata-cbus.c
ata-chipset.c ata-commands.h ata-disk.c
ata-disk.h ata-dma.c ata-isa.c
ata-lowlevel.c ata-pci.c ata-pci.h
ata-queue.c ata-raid.c ata-raid.h
atapi-cd.c atapi-cd.h atapi-fd.c
atapi-fd.h atapi-tape.c atapi-tape.h
sys/modules Makefile
sbin/atacontrol atacontrol.c
Added files:
sys/modules/ata Makefile Makefile.inc
sys/modules/ata/ata Makefile
sys/modules/ata/atacam Makefile
sys/modules/ata/atacard Makefile
sys/modules/ata/atacbus Makefile
sys/modules/ata/atadisk Makefile
sys/modules/ata/ataisa Makefile
sys/modules/ata/atapci Makefile
sys/modules/ata/atapicd Makefile
sys/modules/ata/atapifd Makefile
sys/modules/ata/atapist Makefile
sys/modules/ata/ataraid Makefile
Log:
This is the much rumoured ATA mkIII update that I've been working on.
o ATA is now fully newbus'd and split into modules.
This means that on a modern system you just load "atapci and ata"
to get the base support, and then one or more of the device
subdrivers "atadisk atapicd atapifd atapist ataraid".
All can be loaded/unloaded anytime, but for obvious reasons you
dont want to unload atadisk when you have mounted filesystems.
o The device identify part of the probe has been rewritten to fix
the problems with odd devices the old had, and to try to remove
so of the long delays some HW could provoke. Also probing is done
without the need for interrupts, making earlier probing possible.
o SATA devices can be hot inserted/removed and devices will be created/
removed in /dev accordingly.
NOTE: only supported on controllers that has this feature:
Promise and Silicon Image for now.
On other controllers the usual atacontrol detach/attach dance is
still needed.
o Support for "atomic" composite ATA requests used for RAID.
o ATA RAID support has been rewritten and and now supports these
metadata formats:
"Adaptec HostRAID"
"Highpoint V2 RocketRAID"
"Highpoint V3 RocketRAID"
"Intel MatrixRAID"
"Integrated Technology Express"
"LSILogic V2 MegaRAID"
"LSILogic V3 MegaRAID"
"Promise FastTrak"
"Silicon Image Medley"
"FreeBSD PseudoRAID"
o Update the ioctl API to match new RAID levels etc.
o Update atacontrol to know about the new RAID levels etc
NOTE: you need to recompile atacontrol with the new sys/ata.h,
make world will take care of that.
NOTE2: that rebuild is done differently from the old system as
the rebuild is now done piggybacked on read requests to the
array, so atacontrol simply starts a background "dd" to rebuild
the array.
o The reinit code has been worked over to be much more robust.
o The timeout code has been overhauled for races.
o Support of new chipsets.
o Lots of fixes for bugs found while doing the modulerization and
reviewing the old code.
Missing or changed features from current ATA:
o atapi-cd no longer has support for ATAPI changers. Todays its
much cheaper and alot faster to copy those CD images to disk
and serve them from there. Besides they dont seem to be made
anymore, maybe for that exact reason.
o ATA RAID can only read metadata from all the above metadata formats,
not write all of them (Promise and Highpoint V2 so far). This means
that arrays can be picked up from the BIOS, but they cannot be
created from FreeBSD. There is more to it than just the missing
write metadata support, those formats are not unique to a given
controller like Promise and Highpoint formats, instead they exist
for several types, and even worse, some controllers can have
different formats and its impossible to tell which one.
The outcome is that we cannot reliably create the metadata of those
formats and be sure the controller BIOS will understand it.
However write support is needed to update/fail/rebuild the arrays
properly so it sits fairly high on the TODO list.
o So far atapicam is not supported with these changes. When/if this
will change is up to the maintainer of atapi-cam so go there for
questions.
HW donated by: Webveveriet AS
HW donated by: Frode Nordahl
HW donated by: Yahoo!
HW donated by: Sentex
Patience by: Vife and my boys (and even the cats)
Revision Changes Path
1.33 +34 -14 src/sbin/atacontrol/atacontrol.c
1.1011 +1 -0 src/sys/conf/files
1.186 +3 -2 src/sys/conf/kmod.mk
1.497 +0 -6 src/sys/conf/options
1.236 +410 -677 src/sys/dev/ata/ata-all.c
1.88 +283 -296 src/sys/dev/ata/ata-all.h
1.30 +10 -27 src/sys/dev/ata/ata-card.c
1.16 +43 -45 src/sys/dev/ata/ata-cbus.c
1.99 +797 -513 src/sys/dev/ata/ata-chipset.c
1.3 +98 -97 src/sys/dev/ata/ata-commands.h
1.183 +241 -228 src/sys/dev/ata/ata-disk.c
1.50 +16 -18 src/sys/dev/ata/ata-disk.h
1.133 +64 -61 src/sys/dev/ata/ata-dma.c
1.24 +11 -24 src/sys/dev/ata/ata-isa.c
1.55 +347 -186 src/sys/dev/ata/ata-lowlevel.c
1.92 +90 -67 src/sys/dev/ata/ata-pci.c
1.38 +308 -288 src/sys/dev/ata/ata-pci.h
1.43 +233 -117 src/sys/dev/ata/ata-queue.c
1.82 +3047 -1392 src/sys/dev/ata/ata-raid.c
1.28 +575 -234 src/sys/dev/ata/ata-raid.h
1.174 +620 -694 src/sys/dev/ata/atapi-cd.c
1.44 +232 -236 src/sys/dev/ata/atapi-cd.h
1.98 +248 -250 src/sys/dev/ata/atapi-fd.c
1.24 +36 -40 src/sys/dev/ata/atapi-fd.h
1.95 +347 -283 src/sys/dev/ata/atapi-tape.c
1.23 +98 -102 src/sys/dev/ata/atapi-tape.h
1.435 +1 -0 src/sys/modules/Makefile
1.1 +13 -0 src/sys/modules/ata/Makefile (new)
1.1 +3 -0 src/sys/modules/ata/Makefile.inc (new)
1.1 +10 -0 src/sys/modules/ata/ata/Makefile (new)
1.1 +9 -0 src/sys/modules/ata/atacam/Makefile (new)
1.1 +9 -0 src/sys/modules/ata/atacard/Makefile (new)
1.1 +9 -0 src/sys/modules/ata/atacbus/Makefile (new)
1.1 +9 -0 src/sys/modules/ata/atadisk/Makefile (new)
1.1 +9 -0 src/sys/modules/ata/ataisa/Makefile (new)
1.1 +9 -0 src/sys/modules/ata/atapci/Makefile (new)
1.1 +9 -0 src/sys/modules/ata/atapicd/Makefile (new)
1.1 +9 -0 src/sys/modules/ata/atapifd/Makefile (new)
1.1 +9 -0 src/sys/modules/ata/atapist/Makefile (new)
1.1 +9 -0 src/sys/modules/ata/ataraid/Makefile (new)
1.24 +18 -9 src/sys/sys/ata.h
More information about the cvs-src
mailing list