cvs commit: src/sys/dev/aic7xxx aic79xx.c aic79xx.reg aic79xx.seq
aic79xx_inline.h
Justin T. Gibbs
gibbs at FreeBSD.org
Mon May 26 14:26:53 PDT 2003
gibbs 2003/05/26 14:26:52 PDT
FreeBSD src repository
Modified files:
sys/dev/aic7xxx aic79xx.c aic79xx.reg aic79xx.seq
aic79xx_inline.h
Log:
Correct/Simplify ignore wide residue message handling
aic79xx.c:
In ahd_handle_ign_wide_residue():
o Use SCB_XFERLEN_ODD SCB field to determine transfer
"oddness" rather than the DATA_COUNT_ODD logic.
SCB_XFERLEN_ODD is toggled on every ignore wide
residue message so that multiple ignore wide residue
messages for the same transaction are properly supported.
o If the sg list has been exausted, the sequencer
doesn't bother to update the residual data count
since it is known to be zero. Perform the zeroing
manually before calculating the remaining data count.
o Use multibyte in/out macros instead of shifting/masking
by hand.
aic79xx_inline.h:
In ahd_setup_scb_common(), setup the SCB_XFERLEN_ODD field.
aic79xx.reg:
Use the SCB_TASK_ATTRIBUTE field as a bit field in the
non-packetized case. We currently only define one bit,
SCB_XFERLEN_ODD.
Remove the ODD_SEG bit field that was used to carry the odd
transfer length information through the SG cache. This
is obviated by SCB_XFERLEN_ODD field.
Remove the DATA_COUNT_ODD scratch ram byte that was used
dynamicaly compute data transfer oddness. This is obviated
by SCB_XFERLEN_ODD field.
aic79xx.seq:
Remove all updates to the DATA_COUNT_ODD scratch ram field.
Remove all uses of ODD_SEG. These two save quite a few
sequencer instructions.
Use SCB_XFERLEN_ODD to validate the end of transfer
ignore wide residue message case.
Revision Changes Path
1.15 +24 -32 src/sys/dev/aic7xxx/aic79xx.c
1.13 +7 -2 src/sys/dev/aic7xxx/aic79xx.reg
1.11 +4 -13 src/sys/dev/aic7xxx/aic79xx.seq
1.11 +7 -2 src/sys/dev/aic7xxx/aic79xx_inline.h
More information about the cvs-src
mailing list