driver / kernel ignores TEST UNIT READY command

[Timothy Reaves]

	My 2.4.4 kernel has this value set at 15000 instead of the default 5000 
for some reason.  But it is still being ignored. 2.2.18 does not due this.



Timothy Reaves wrote:

>     Is there no one developing the driver that can respond to this?  it 
> is a BUG.
> 
> 
> Timothy Reaves wrote:
> 
>>
>> In a message dated 5/31/2001 11:52:16 AM EST, treaves at silverfields.com 
>> writes:
>>
>>
>>  > > Can you send me a log file under 2.2.18 from the same version
>>
>>  > > of VueScan you used to produce the log file you already sent me?
>>  > > Here it is.
>>
>>
>>  >The difference between the two log files is interesting.  The SCAN
>>  >command is the same on both, but the TEST UNIT READY command
>>  >returns immediately under 2.4.4 but returns in 5 seconds on the
>>  >working version.  This appears to be the problem - the scsi driver
>>  >on 2.4.4 is returning success immediately, while it should be
>>  >either returning an error or waiting for 5 seconds.
>>  >
>>  >I'm not sure what I can do to fix this, since it's probably buried
>>  >somewhere in the source code of the scsi driver you're using.
>>  >
>>  >If you have a different scsi card, you might try using it instead.
> 
> 
> 



To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message