Problem with adaptec card and RH6.0

[Norgul Fluzlat]

April,

I'm the same identical problem with my AHA-2940U2W
board and RH6.0.  I've got only an LVD drive and a
CD-RW (Yamaha) connected to the card  I've had many
discussions with Red Hat support with no clear
solution yet.  Right now they are blaming the problem
on noise due to a poor cable. I'd been using a
non-adaptec cable for the Ultra2 (LVD) that was not
twisted pair.  I'm getting a new cable in case this is
the problem.

Regards,

Paul A. Lambert
Certicom Corp.


--- April Escamilla <aprile at airlinksystems.com> wrote:
>    scsi:  aborting command due to timeout pid=2
> scsi=0 channel=0 id=2 lun=0
>...
>     If anyone has encountered this problem or knows
> what can be done about
> it, I'd be thrilled to hear about it  :)


_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com



To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message