AIC 7890/1 Ultra 2 under Linux
Markus Egle
egle at ai-lab.fh-furtwangen.de
Thu Mar 18 01:57:49 PST 1999
On Wed, 17 Mar 1999, Markus Egle wrote:
> I have the same problem. I couldn't install RedHat5.2 (2.0.36) (mount
> failed, after scanning the scsi-bus).
> RedHat5.1 (2.0.34) aic7xxx-5.1.10 was successful.
>
> Trying the 2.2.[0-2] showed the same problem. Adding some boot-options,
> like: aic7xxx=no_reset aic7xxx=extended aic7xxx=no_probe didn't help.
>
> I've tried booting without any CDROMS and on both Channels, tested
> some options of the SCSI-Adapter, limited the speed, checked the
> termination several times, ....
HD is a DGVS and not a DRVS, sorry.
Now I tried again with 2.2.2 and 5.1.12 and without LUN (already had it in
2.2.1) I still get an kernel panic.
:
:
(scsi 0:0:0:0) Synchronous at 40.0 Mbyte/sec, offset 8.
(scsi 0= BRKADRINT error (0x20):
Scratch Ram/SCB Array Ram Parity error
(scsi 0) SEQADDR = 0x15c
(scsi 0= BRKADRINT error (0x20):
Scratch Ram/SCB Array Ram Parity error
(scsi 0) SEQADDR = 0x166
(scsi 0= BRKADRINT error (0x20):
Scratch Ram/SCB Array Ram Parity error
(scsi 0) SEQADDR = 0x178
(scsi 0= BRKADRINT error (0x20):
Scratch Ram/SCB Array Ram Parity error
(scsi 0) SEQADDR = 0x179
(scsi 0= BRKADRINT error (0x20):
Scratch Ram/SCB Array Ram Parity error
(scsi 0) SEQADDR = 0xc4
(scsi 0= BRKADRINT error (0x20):
Scratch Ram/SCB Array Ram Parity error
(scsi 0) SEQADDR = 0x153
SCSI device sda: hdwr sector= 512 bytes Sectors= 17829870 [8705MB]
[8,7GB]
Partition check:
sda: sda1 sda3 sda4 <sda5 sda6 sda7>
Freeing unused kernel memory: 36k freed
Kernel panic: aic7xxx: AWAITING_MSG for an SCB that does not have a
waiting message
In swapper task - not syncing
I'm wondering why there is a difference between downloading sequencer code
2.2.2 > (scsi0) Downloading sequencer code... 404 instructions downloaded
2.0.34> (scsi0) Downloading sequencer code... 413 instructions downloaded
other error-messages and config-files at
http://www.ai-lab.fh-furtwangen.de/~egle/kernel_probs.html
Any ideas,
Markus Egle
To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message
More information about the aic7xxx
mailing list