Weird RESET Problem with Adaptec 2940UW too..please help

[Jackson Chan]

>Hi all,
>
>I have a Sony 926S CDR and a pioneer CDrom on the same
>50-pin scsi channel. They used to work well with the Linux 2.0.x channel. 
>However, when I upgraded to 2.1.x or 2.2.0 pre X, the driver give me the
>following error:
>
>(scsi0:0:6:0) Synchronus at 10.0 Mbyte/sec, offset 15
>(scsi0:0:6:0) No Active SCB for reconnecting target - Issuing BUS DEVICE
>RESET.
>(scsi0:0:6:0) 	      SAVED_TCL=0x60, ARG_1=0xff, SEQADDR=0xfc
>.
>.
>.
>
>
>It keep repeating this message infinately...the only way to get around
>this is to disable the "Enable Disconnection" for scsi id 6 in the 2940
>Bios...but that lead to error when I burn CD since it need to disconnect
>during finalize phase...Is there a "proper" way to fix that? Why it just
>happen on the newer kernel but not 2.0.x ?? I really need some help on
>that and I hope someone can let me know what is going on here....Or 
>someone can point me to the right direction. Thanks in
>advance..
>
>Jackson Chan
>jacksonc at ucsee.eecs.berkeley.edu



To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message