2.1.128
Scsi listbot
scsi at milk.liquidnet.org
Thu Nov 19 19:10:17 PST 1998
Ever Since I changed over to 2.1.128, my scsi just doesn't want to work
all it will do is reset over and over when I try to mount the cdrom drives
or use my scanner. I have the 2940u2w card, two cdroms on the 50pin internal
connection, the scanner is on ultra2.
/proc/scsi/scsi -
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: UMAX Model: Astra 610S Rev: V1.3
Type: Scanner ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: SONY Model: CD-R CDU926S Rev: 1.1g
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: PLEXTOR Model: CD-ROM PX-6XCS Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
/proc/scsi/aic7xxx/0 -
Adaptec AIC7xxx driver version: 5.1.4/3.2.4
Compile Options:
AIC7XXX_RESET_DELAY : 5
AIC7XXX_TAGGED_QUEUEING: Adapter Support Enabled
Check below to see which
devices use tagged queueing
AIC7XXX_PAGE_ENABLE : Enabled (This is no longer an option)
AIC7XXX_PROC_STATS : Enabled
Adapter Configuration:
SCSI Adapter: Adaptec AHA-294X Ultra2 SCSI host adapter
Ultra2-LVD/SE Wide Controller
PCI MMAPed I/O Base: 0xe8022000
Adapter SEEPROM Config: SEEPROM found and used.
Adaptec SCSI BIOS: Enabled
IRQ: 10
SCBs: Active 0, Max Active 2,
Allocated 15, HW 32, Page 255
Interrupts: 115
BIOS Control Word: 0x18a6
Adapter Control Word: 0x1c5c
Extended Translation: Enabled
Disconnect Enable Flags: 0xffff
Ultra Enable Flags: 0x0000
Tag Queue Enable Flags: 0x0000
Ordered Queue Tag Flags: 0x0000
Default Tag Queue Depth: 24
Tagged Queue By Device array for aic7xxx host instance 0:
{255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
Actual queue depth per device for aic7xxx host instance 0:
{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}
Statistics:
/proc/pci -
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: VIA Technologies VT 82C597 Apollo VP3 (rev 4).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=16.
Prefetchable 32 bit memory at 0xe0000000 [0xe0000008].
Bus 0, device 1, function 0:
PCI bridge: VIA Technologies Unknown device (rev 0).
Vendor id=1106. Device id=8598.
Medium devsel. Master Capable. No bursts. Min Gnt=4.
Bus 0, device 7, function 0:
ISA bridge: VIA Technologies VT 82C586 Apollo ISA (rev 65).
Medium devsel. Master Capable. No bursts.
Bus 0, device 7, function 1:
IDE interface: VIA Technologies VT 82C586 Apollo IDE (rev 6).
Medium devsel. Fast back-to-back capable. Master Capable. Latency=64.
I/O at 0xe000 [0xe001].
Bus 0, device 7, function 2:
USB Controller: VIA Technologies VT 82C586 Apollo USB (rev 2).
Medium devsel. IRQ b. Master Capable. Latency=64.
I/O at 0xe400 [0xe401].
Bus 0, device 7, function 3:
Host bridge: VIA Technologies VT 82C586B Apollo ACPI (rev 16).
Medium devsel. Fast back-to-back capable.
Host bridge: VIA Technologies VT 82C586B Apollo ACPI (rev 16).
Medium devsel. Fast back-to-back capable.
Bus 0, device 8, function 0:
SCSI storage controller: Adaptec AHA-2940U2 (rev 0).
Medium devsel. Fast back-to-back capable. BIST capable. IRQ a. Master
Capable. Latency=64. Min Gnt=39.Max Lat=25.
I/O at 0xe800 [0xe801].
Non-prefetchable 64 bit memory at 0xe8022000 [0xe8022004].
Bus 0, device 9, function 0:
Multimedia video controller: Zoran ZR36120 (rev 2).
Fast devsel. IRQ c. Master Capable. Latency=64. Min Gnt=2.Max Lat=16.
Non-prefetchable 32 bit memory at 0xe8020000 [0xe8020000].
Bus 0, device 10, function 0:
VGA compatible controller: Texas Instruments TVP4020 Permedia 2 (rev 1).
Medium devsel. Fast back-to-back capable. IRQ 9. Master Capable. Latency=64. Min Gnt=192.Max Lat=192.
Non-prefetchable 32 bit memory at 0xe8000000 [0xe8000000].
Non-prefetchable 32 bit memory at 0xe7000000 [0xe7000000].
Non-prefetchable 32 bit memory at 0xe7800000 [0xe7800000].
Bus 0, device 11, function 0:
Ethernet controller: DEC DC21140 (rev 34).
Medium devsel. Fast back-to-back capable. IRQ 9. Master Capable. Latency=64. Min Gnt=20.Max Lat=40.
I/O at 0xec00 [0xec01].
Non-prefetchable 32 bit memory at 0xe8021000 [0xe8021000].
if anyone has any idea how to get this working please contact me at sexton at midsouth.rr.com
Tanks, William Sexton
To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe freebsd-aic7xxx" in the body of the message
More information about the aic7xxx
mailing list