aic7880 problem talking to CD-R
Smith, Jeremy
SmithJ at mps.bellhowell.com
Tue Mar 3 15:34:59 PST 1998
I had the same message with my UW when I moved from BIOS 1.25 to 1.32S4.
To correct the problem I strictly defined each of my SCSI devices in the
SCSI BIOS so that the UW would only attempt to negotiate things that the
devices were capable of doing. I found the biggest culprit was indeed
the wide neg. and that I had the problem with more than one device. You
should try making sure that you aren't letting the SCSI Host Adapter
request a configuration that the devices aren't capable of handling.
------------------------------------------------------------------------
------------------------------------------------------------------------
---
Jeremy Smith
smithj at mps.bellhowell.com <mailto:smithj at mps.bellhowell.com>
System Administrator/
Day: (919)767-6530
PC Technician
Eve: (919)859-5690
Bell+Howell MPS
"Modesty is a quality in a lover more praised by women than liked."
Richard B. Sheridan (1751-1816)
------------------------------------------------------------------------
------------------------------------------------------------------------
---
-----Original Message-----
From: Michael Poole [SMTP:poole+ at andrew.cmu.edu]
Sent: Tuesday, March 03, 1998 6:25 PM
To: Doug Ledford
Cc: aic7xxx at FreeBSD.ORG
Subject: Re: aic7880 problem talking to CD-R
My apologies; I apparently did not wait long enough for
something
to happen while I was getting the "Unexepected busfree" errors.
Eventually (it took something like 10 minutes) it will start
scrolling
these messages very quickly:
(scsi0:-1:-1:-1) Bad scbptr 16 during SELTO.
(scsi0:-1:-1:-1) Referenced SCB 255 not valid during SELTO.
SCSISEQ = 0x5a SEQADDR = 0x8 SSTAT0 = 0x10 SSTAT1 = 0x8a
It seems to echo that forever, but I'll continue to keep
an eye on
it and see if anything changes.
To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message
To Unsubscribe: send mail to majordomo at FreeBSD.org
with "unsubscribe aic7xxx" in the body of the message
More information about the aic7xxx
mailing list