Re: Appears rtw88 driver hangs network stack.
- In reply to: Bjoern A. Zeeb: "Re: Appears rtw88 driver hangs network stack."
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Fri, 14 Jun 2024 19:59:00 UTC
I am now using lagg for re0, re1, and wlan0. I will continue testing rtw88 driver. Thanks for your patience. On 6/12/24 17:40, Bjoern A. Zeeb wrote: > On Wed, 12 Jun 2024, Steven Friedrich wrote: > >> I discovered this during testing freebsd 14.1. >> >> System description: >> >> slimline is an HP Slimline Desktop - 290-p0014 >> >> Intel(R) Core(TM) i7-8700 CPU @ 3.20GHz >> Coffee Lake (Core i7) >> Ethernet RTL8111/8168/8411 and RTL8125 2.5GbE >> Wi-Fi RTL8821CE >> >> In an effort to reproduce, I pulled /usr/src and /usr/ports using git. >> >> I started a buildworld and ssh'ed in and tail -f /var/log/Phase1.log. >> >> After a short while, system is frozen to ssh, and can't use console >> either. The latest changes were to network code, so I'll reboot and >> build and install world and kernel before I continue testing... > > And this does not happen if you don't bring wlan0 up? > > You do have three interfaces all using the same logical network it > seems, which makes me wonder where packets go in first place (default > route?) and certainly without lagg doesn't seem to make much sense for > re0 and re1. > > You may also want to look into getting (headless) crashdumps setup which > may help you to get more information as to what is going on. > > Are you also using drm-kmod and X? > > >> Here's my ifconfig before the lockup: >> >> re0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> >> metric 0 mtu 1500 >> options=60251b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4,LRO,WOL_MAGIC,RXCSUM_IPV6,TXCSUM_IPV6> >> >> ether ??:??:??:??:??:?? >> inet 192.168.1.5 netmask 0xffffff00 broadcast 192.168.1.255 >> media: Ethernet autoselect (1000baseT <full-duplex>) >> status: active >> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> >> re1: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> >> metric 0 mtu 1500 >> options=60251b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4,LRO,WOL_MAGIC,RXCSUM_IPV6,TXCSUM_IPV6> >> >> ether ??:??:??:??:??:?? >> inet 192.168.1.55 netmask 0xffffff00 broadcast 192.168.1.255 >> media: Ethernet autoselect (2500Base-T <full-duplex>) >> status: active >> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> >> lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 >> mtu 16384 >> options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> >> inet 127.0.0.1 netmask 0xff000000 >> inet6 ::1 prefixlen 128 >> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 >> groups: lo >> nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> >> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 >> mtu 1500 >> options=0 >> ether ??:??:??:??:??:?? >> inet 192.168.1.72 netmask 0xffffff00 broadcast 192.168.1.255 >> groups: wlan >> ssid channel 11 (2462 MHz 11g) bssid >> ??:??:??:??:??:?? >> regdomain FCC country US authmode WPA2/802.11i privacy ON >> deftxkey UNDEF AES-CCM 2:128-bit txpower 30 bmiss 7 scanvalid 60 >> protmode CTS wme roaming MANUAL >> parent interface: rtw880 >> media: IEEE 802.11 Wireless Ethernet OFDM/48Mbps mode 11g >> status: associated >> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> >> >> >> On 6/12/24 10:44, Bjoern A. Zeeb wrote: >>> On Wed, 12 Jun 2024, Steven Friedrich wrote: >>> >>>> I'm running 14.1-RELEASE, with q2 ports. >>>> >>>> If I configure rtw88 and wlan in /etc/rc.conf, networking locks up >>>> after a short while. >>> >>> In what way? What's the state of wireless? Do you have logs? >>> >>> Do you have a parallel ethernet? Is that working? Do you use lagg in >>> that case? >>> >>> >>>> Where might I find current status of this driver? Open bug reports? >>> >>> Open (and closed) bug reports categorized for rtw88/rtw89 are here: >>> https://bugs.freebsd.org/bugzilla/showdependencytree.cgi?id=273621&hide_resolved=0 >>> >> >> >