[Bug 255337] ath(4): Atheros AR9462 identified correctly but does not function
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Wed, 17 Apr 2024 07:22:25 UTC
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=255337
--- Comment #24 from Dmitry Lukhtionov <dmitryluhtionov@gmail.com> ---
Not working with patch
ath0@pci0:3:0:0: class=0x028000 rev=0x01 hdr=0x00 vendor=0x168c
device=0x0034 subvendor=0x105b subdevice=0xe052
vendor = 'Qualcomm Atheros'
device = 'AR9462 Wireless Network Adapter'
class = network
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pcib0: allocated type 3 (0xb3900000-0xb39fffff) for rid 20 of pcib3
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: memory decode 0xb3900000-0xb39fffff
pci3: <ACPI PCI bus> on pcib3
pcib3: allocated bus range (3-3) for rid 0 of pci3
pci3: domain=0, physical bus=3
found-> vendor=0x168c, dev=0x0034, revid=0x01
domain=0, bus=3, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 4 messages, 64 bit, vector masks
map[10]: type Memory, range 64, base 0xb3900000, size 19, enabled
pcib3: allocated memory range (0xb3900000-0xb397ffff) for rid 10 of pci0:3:0:0
ath0: <Atheros AR946x/AR948x> mem 0xb3900000-0xb397ffff at device 0.0 on pci3
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 17
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 58
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: RX status length: 48
ath0: RX buffer size: 4096
ath0: TX descriptor length: 128
ath0: TX status length: 36
ath0: TX buffers per descriptor: 4
ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
ath0: RX timestamp: 32 bits
ath0: TX timestamp: 32 bits
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 stream STBC transmit enabled
ath0: [HT] LDPC transmit/receive enabled
ath0: [HT] 2 RX streams; 2 TX streams
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps
36Mbps 48Mbps 54Mbps
ath0: 2T2R
ath0: 11na MCS 20MHz
ath0: MCS 0-7: 6.5Mbps - 65Mbps
ath0: MCS 8-15: 13Mbps - 130Mbps
ath0: 11na MCS 20MHz SGI
ath0: MCS 0-7: 7Mbps - 72Mbps
ath0: MCS 8-15: 14.5Mbps - 144.5Mbps
ath0: 11na MCS 40MHz:
ath0: MCS 0-7: 13.5Mbps - 135Mbps
ath0: MCS 8-15: 27Mbps - 270Mbps
ath0: 11na MCS 40MHz SGI:
ath0: MCS 0-7: 15Mbps - 150Mbps
ath0: MCS 8-15: 30Mbps - 300Mbps
ath0: 11ng MCS 20MHz
ath0: MCS 0-7: 6.5Mbps - 65Mbps
ath0: MCS 8-15: 13Mbps - 130Mbps
ath0: 11ng MCS 20MHz SGI
ath0: MCS 0-7: 7Mbps - 72Mbps
ath0: MCS 8-15: 14.5Mbps - 144.5Mbps
ath0: 11ng MCS 40MHz:
ath0: MCS 0-7: 13.5Mbps - 135Mbps
ath0: MCS 8-15: 27Mbps - 270Mbps
ath0: 11ng MCS 40MHz SGI:
ath0: MCS 0-7: 15Mbps - 150Mbps
ath0: MCS 8-15: 30Mbps - 300Mbps
ath0: AR9460 mac 640.2 RF5110 phy 2822.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
ath0: using multicast key search
--
You are receiving this mail because:
You are on the CC list for the bug.