Re: New laptop: AC 9461/9560: iwm or iwlwifi?
- Reply: Andrea Venturoli : "Re: New laptop: AC 9461/9560: iwm or iwlwifi?"
- In reply to: Bjoern A. Zeeb: "Re: New laptop: AC 9461/9560: iwm or iwlwifi?"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Sat, 29 Oct 2022 16:39:03 UTC
On 10/28/22 14:58, Bjoern A. Zeeb wrote: Hello. > That is also not good but something I can help with working on. Thanks in advance, then :) > You should go to stable/13 (or main). Done (stable/13 from yesterday). Now it seems to work, at least in a basic case... with time I'll see about stability, connecting to other access points, integrating it in LAGG with a wired interface, ecc... > Could you please > share the full iwlwifi parts from a bootverbose, as this is peculiar > case I haven't had much feedback on in the last year. FYI: grep -E "iwl|wlan" /var/log/all.log | grep -v ipfw > Oct 29 18:12:36 hector kernel: wlan0: link state changed to DOWN > Oct 29 18:12:36 hector kernel: wlan: <802.11 Link Layer> > Oct 29 18:12:36 hector kernel: Autoloading module: if_iwlwifi > Oct 29 18:12:36 hector kernel: iwlwifi0: <iwlwifi> mem 0x91118000-0x9111bfff at device 12.0 on pci0 > Oct 29 18:12:36 hector kernel: iwlwifi0: attempting to allocate 6 MSI-X vectors (16 supported) > Oct 29 18:12:36 hector kernel: iwlwifi0: using IRQs 131-136 for MSI-X > Oct 29 18:12:36 hector kernel: firmware: 'iwlwifi-9000-pu-b0-jf-b0-46.ucode' version 46: 1518788 bytes loaded at 0xffffffff8238e000 > Oct 29 18:12:36 hector kernel: iwlwifi0: successfully loaded firmware image 'iwlwifi-9000-pu-b0-jf-b0-46.ucode' > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 0 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 1 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 2 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 3 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 4 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 6 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 8 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 9 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 10 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 11 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 15 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 16 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 18 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 19 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 20 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 21 > Oct 29 18:12:36 hector kernel: iwlwifi0: WRT: Overriding region id 28 > Oct 29 18:12:36 hector kernel: iwl-debug-yoyo.bin: could not load firmware image, error 2 > Oct 29 18:12:36 hector kernel: iwl-debug-yoyo_bin: could not load firmware image, error 2 > Oct 29 18:12:36 hector kernel: iwl_debug_yoyo_bin: could not load firmware image, error 2 > Oct 29 18:12:36 hector kernel: iwlwifi0: loaded firmware version 46.9d0122c0.0 9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm > Oct 29 18:12:36 hector kernel: iwlwifi0: Detected Intel(R) Wireless-AC 9461, REV=0x312 > Oct 29 18:12:36 hector kernel: iwlwifi0: base HW address: 20:1e:88:78:ac:3a, OTP minor version: 0x4 > Oct 29 18:12:36 hector kernel: iwlwifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > Oct 29 18:12:36 hector kernel: iwlwifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps > Oct 29 18:12:36 hector kernel: iwlwifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps > Oct 29 18:12:36 hector kernel: iwlwifi0: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled) > Oct 29 18:12:36 hector kernel: wlan0: bpf attached > Oct 29 18:12:36 hector kernel: wlan0: Ethernet address: 20:1e:88:78:ac:3a > Oct 29 18:12:36 hector kernel: Created wlan(4) interfaces: wlan0. > Oct 29 18:12:36 hector kernel: wlan0: no link ..... > Oct 29 18:12:36 hector kernel: wlan0: link state changed to UP > Oct 29 18:12:36 hector kernel: DHCPREQUEST on wlan0 to 255.255.255.255 port 67 > Oct 29 18:12:36 hector kernel: Starting Network: lo0 wlan0. > Oct 29 18:12:36 hector kernel: wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > Oct 29 18:12:36 hector kernel: groups: wlan > Oct 29 18:12:36 hector kernel: parent interface: iwlwifi0 Feel free to ask for anything else! bye & Thanks av. P.S. I guess this card should be able to reach higher speeds... I take it that the driver currently can't. Fine for me. Of course I'll be happy if it will in the future, but at least it works and it's enough.