Re: rtw88 import to main

In reply to: Daniel_Pérez: "Re: rtw88 import to main"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: Daniel_Pérez <steew0x8_at_protonmail.com>
Date: Fri, 01 Apr 2022 13:56:33 UTC
PD: I seem to be unable to do anything with the wlan device, such as joining networks or scanning. This was the dmesg when I tried to scan with wifimgr:

rtw880: stop vif 8c:c8:4b:59:ee:75 on port 0
rtw880: start vif 8c:c8:4b:59:ee:75 on port 0
wlan0: Ethernet address: 8c:c8:4b:59:ee:75
wlan0: ieee80211_new_state_locked: pending INIT -> SCAN transition lost
rtw880: invalid fw checksum
rtw880: failed to download firmware
rtw880: leave idle state failed
rtw880: failed to leave ips state
rtw880: failed to leave idle state
rtw880: lkpi_stop_hw_scan: failed to cancel scan: 35 (0xfffffe0098ddb1c0, 0xfffff80041f41c80)
rtw880: stop vif 8c:c8:4b:59:ee:75 on port 0
rtw880: invalid fw checksum
rtw880: failed to download firmware
lkpi_ic_vap_create: failed to start hw: -22

wpa_supplicant also does no good, as it cannot connect to my network. (dual band with the same SSID)


------- Original Message -------
On Friday, April 1st, 2022 at 3:39 PM, Daniel Pérez <steew0x8@protonmail.com> wrote:


> Thank you for the hint. Kernel built without an issue.
> As expected, part of the firmware fails to load without the physmem hint (7200MB). I tried to boot with physmem set to 4G, firmware loaded and I could attach rtw880 to a new wlan device.
>
> Following are full logs, first with original memory (7200MB) and lastly with physmem (4G):
>
> pciconf:
> rtw880@pci0:3:0:0:class=0x028000 rev=0x00 hdr=0x00 vendor=0x10ec
> device=0xc822 subvendor=0x103c subdevice=0x85f7
> vendor = 'Realtek Semiconductor Co., Ltd.'
> device = 'RTL8822CE 802.11ac PCIe Wireless Network Adapter'
> class = network
>
> dmesg ORIGINAL:
>
> Copyright (c) 1992-2021 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 13.0-STABLE #1 stable/13-n249237-d055313f8c6: Mon Feb 28 20:32:52 CET 2022
> root@zerserk:/usr/obj/usr/src/amd64.amd64/sys/STEEW amd64
> FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
> VT(efifb): resolution 1920x1080
> CPU: AMD Ryzen 5 4600H with Radeon Graphics (2994.51-MHz K8-class CPU)
> Origin="AuthenticAMD" Id=0x860f01 Family=0x17 Model=0x60 Stepping=1
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>
> Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
>
> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
>
> AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
>
> Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
>
> Structured Extended Features2=0x400004<UMIP,RDPID>
>
> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
>
> AMD Extended Feature Extensions ID EBX=0x90cf757<CLZERO,IRPerf,XSaveErPtr,RDPRU,MCOMMIT,WBNOINVD,IBPB,IBRS,STIBP,PREFER_IBRS,SSBD>
>
> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
> TSC: P-state invariant, performance statistics
> real memory = 8589934592 (8192 MB)
> avail memory = 7604330496 (7252 MB)
> Event timer "LAPIC" quality 600
> ACPI APIC Table: <HPQOEM 87B1 >
>
> FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
> FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads
> random: registering fast source Intel Secure Key RNG
> random: fast provider: "Intel Secure Key RNG"
> random: unblocking device.
> ioapic0 <Version 2.1> irqs 0-23
>
> ioapic1 <Version 2.1> irqs 24-55
>
> Launching APs: 10 1 7 9 6 8 4 5 11 2 3
> random: entropy device external interface
> kbd1 at kbdmux0
> efirtc0: <EFI Realtime Clock>
>
> efirtc0: registered as a time-of-day clock, resolution 1.000000s
> aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
>
> acpi0: <HPQOEM SLIC-MPC>
>
> Firmware Error (ACPI): Failure creating named object [\134SMIB], AE_ALREADY_EXISTS (20201113/dsfield-820)
> ACPI Warning: NsLookup: Type mismatch on SMIB (Integer), searching for (RegionField) (20201113/nsaccess-869)
> Firmware Error (ACPI): Could not resolve symbol [\134_SB.PCI0.GPP1.WLAN], AE_NOT_FOUND (20201113/dswload2-315)
> ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20201113/psobject-372)
> acpi0: Power Button (fixed)
> attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
>
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
>
> atrtc0: registered as a time-of-day clock, resolution 1.000000s
> Event timer "RTC" frequency 32768 Hz quality 0
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
>
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 350
> Event timer "HPET1" frequency 14318180 Hz quality 350
> Event timer "HPET2" frequency 14318180 Hz quality 350
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>
> acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
>
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>
> pci0: <ACPI PCI bus> on pcib0
>
> pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
>
> pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0
>
> pci1: <ACPI PCI bus> on pcib1
>
> vgapci0: <VGA-compatible display> port 0xf000-0xf07f mem 0xfb000000-0xfbffffff,0xb0000000-0xbfffffff,0xc0000000-0xc1ffffff at device 0.0 on pci1
>
> hdac0: <NVIDIA (0x10fa) HDA Controller> mem 0xfc080000-0xfc083fff at device 0.1 on pci1
>
> pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0
>
> pci2: <ACPI PCI bus> on pcib2
>
> re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfc904000-0xfc904fff,0xfc900000-0xfc903fff at device 0.0 on pci2
>
> re0: Using 1 MSI-X message
> re0: turning off MSI enable bit.
> re0: ASPM disabled
> re0: Chip rev. 0x54000000
> re0: MAC rev. 0x00100000
> miibus0: <MII bus> on re0
>
> rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
>
> rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
> re0: Using defaults for TSO: 65518/35/2048
> re0: Ethernet address: b0:5c:da:42:2f:e2
> re0: netmap queues/slots: TX 1/256, RX 1/256
> pcib3: <ACPI PCI-PCI bridge> at device 2.1 on pci0
>
> pci3: <ACPI PCI bus> on pcib3
>
> pci3: <network> at device 0.0 (no driver attached)
>
> pcib4: <ACPI PCI-PCI bridge> at device 2.4 on pci0
>
> pci4: <ACPI PCI bus> on pcib4
>
> nvme0: <Generic NVMe Device> mem 0xfc700000-0xfc703fff at device 0.0 on pci4
>
> pcib5: <ACPI PCI-PCI bridge> at device 8.1 on pci0
>
> pci5: <ACPI PCI bus> on pcib5
>
> vgapci1: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfc500000-0xfc57ffff at device 0.0 on pci5
>
> pci5: <encrypt/decrypt> at device 0.2 (no driver attached)
>
> xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc300000-0xfc3fffff at device 0.3 on pci5
>
> xhci0: 64 bytes context size, 64-bit DMA
> usbus0 on xhci0
> usbus0: 5.0Gbps Super Speed USB v3.0
> xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc200000-0xfc2fffff at device 0.4 on pci5
>
> xhci1: 64 bytes context size, 64-bit DMA
> usbus1 on xhci1
> usbus1: 5.0Gbps Super Speed USB v3.0
> pci5: <multimedia> at device 0.5 (no driver attached)
>
> hdac1: <AMD Raven HDA Controller> mem 0xfc5c0000-0xfc5c7fff at device 0.6 on pci5
>
> pcib6: <ACPI PCI-PCI bridge> at device 8.2 on pci0
>
> pci6: <ACPI PCI bus> on pcib6
>
> ahci0: <AMD KERNCZ AHCI SATA controller> mem 0xfc601000-0xfc6017ff at device 0.0 on pci6
>
> ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
> ahcich0: <AHCI channel> at channel 0 on ahci0
>
> ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfc600000-0xfc6007ff at device 0.1 on pci6
>
> ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
> ahcich1: <AHCI channel> at channel 0 on ahci1
>
> isab0: <PCI-ISA bridge> at device 20.3 on pci0
>
> isa0: <ISA bus> on isab0
>
> acpi_button0: <Power Button> on acpi0
>
> acpi_syscontainer0: <System Container> on acpi0
>
> battery0: <ACPI Control Method Battery> on acpi0
>
> acpi_acad0: <AC Adapter> on acpi0
>
> acpi_lid0: <Control Method Lid Switch> on acpi0
>
> acpi_tz0: <Thermal Zone> on acpi0
>
> ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_PR_.P000 (20201113/dspkginit-605)
> acpi_tz0: _CRT value is absurd, ignored (255.1C)
> cpu0: <ACPI CPU> on acpi0
>
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> hwpstate0: <Cool`n'Quiet 2.0> on cpu0
>
> Timecounter "TSC-low" frequency 1497187698 Hz quality 1000
> Timecounters tick every 1.000 msec
> ZFS filesystem version: 5
> ZFS storage pool version: features support (5000)
> hdacc0: <NVIDIA (0x0094) HDA CODEC> at cad 0 on hdac0
>
> ugen1.1: <0x1022 XHCI root HUB> at usbus1
>
> hdaa0: <NVIDIA (0x0094) Audio Function Group> at nid 1 on hdacc0
>
> ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_PR_.P000 (20201113/dspkginit-605)
> acpi_tz0: _CRT value is absurd, ignored (255.1C)
> pcm0: <NVIDIA (0x0094) (HDMI/DP 8ch)> at nid 4 on hdaa0
>
> uhub0 on usbus1
> uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
>
> ugen0.1: <0x1022 XHCI root HUB> at usbus0
>
> uhub1 on usbus0
> uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
>
> nvme0: Allocated 61MB host memory buffer
> nvd0: <KBG40ZNV512G KIOXIA> NVMe namespace
>
> nvd0: 488386MB (1000215216 512 byte sectors)
> hdacc1: <Realtek ALC285 HDA CODEC> at cad 0 on hdac1
>
> hdaa1: <Realtek ALC285 Audio Function Group> at nid 1 on hdacc1
>
> GEOM_ELI: Device nvd0p3.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI: Crypto: accelerated software
> pcm1: <Realtek ALC285 (Analog)> at nid 20 and 18 on hdaa1
>
> pcm2: <Realtek ALC285 (Right Analog)> at nid 33 and 25 on hdaa1
>
> Trying to mount root from zfs:zroot/ROOT/13.0-STABLE-20220206.083317 []...
> uhub0: 6 ports with 6 removable, self powered
> uhub1: 6 ports with 6 removable, self powered
> [drm] amdgpu kernel modesetting enabled.
> drmn1: <drmn> on vgapci1
>
> vgapci1: child drmn1 requested pci_enable_io
> vgapci1: child drmn1 requested pci_enable_io
> [drm] initializing kernel modesetting (RENOIR 0x1002:0x1636 0x103C:0x87B1 0xC7).
> [drm] register mmio base: 0xFC500000
> [drm] register mmio size: 524288
> [drm] add ip block number 0 <soc15_common>
>
> [drm] add ip block number 1 <gmc_v9_0>
>
> [drm] add ip block number 2 <vega10_ih>
>
> [drm] add ip block number 3 <psp>
>
> [drm] add ip block number 4 <smu>
>
> [drm] add ip block number 5 <gfx_v9_0>
>
> [drm] add ip block number 6 <sdma_v4_0>
>
> [drm] add ip block number 7 <dm>
>
> [drm] add ip block number 8 <vcn_v2_0>
>
> [drm] add ip block number 9 <jpeg_v2_0>
>
> drmn1: successfully loaded firmware image 'amdgpu/renoir_gpu_info.bin'
> ATOM BIOS: 113-RENOIR-025
> drmn1: successfully loaded firmware image 'amdgpu/renoir_sdma.bin'
> [drm] VCN decode is enabled in VM mode
> [drm] VCN encode is enabled in VM mode
> [drm] JPEG decode is enabled in VM mode
> [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
> drmn1: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
> drmn1: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
> drmn1: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
> [drm] Detected VRAM RAM=512M, BAR=512M
> [drm] RAM width 128bits DDR4
> [TTM] Zone kernel: Available graphics memory: 3844180 KiB
> [TTM] Zone dma32: Available graphics memory: 2097152 KiB
> [TTM] Initializing pool allocator
> [drm] amdgpu: 512M of VRAM memory ready
> [drm] amdgpu: 3072M of GTT memory ready.
> [drm] GART: num cpu pages 262144, num gpu pages 262144
> [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
> drmn1: successfully loaded firmware image 'amdgpu/renoir_asd.bin'
> drmn1: successfully loaded firmware image 'amdgpu/renoir_pfp.bin'
> drmn1: successfully loaded firmware image 'amdgpu/renoir_me.bin'
> drmn1: successfully loaded firmware image 'amdgpu/renoir_ce.bin'
> drmn1: successfully loaded firmware image 'amdgpu/renoir_rlc.bin'
> drmn1: successfully loaded firmware image 'amdgpu/renoir_mec.bin'
> drmn1: successfully loaded firmware image 'amdgpu/renoir_mec2.bin'
> [drm] use_doorbell being set to: [true]
> drmn1: successfully loaded firmware image 'amdgpu/renoir_dmcub.bin'
> [drm] Loading DMUB firmware via PSP: version=0x00000000
> drmn1: successfully loaded firmware image 'amdgpu/renoir_vcn.bin'
> [drm] Found VCN firmware Version ENC: 1.7 DEC: 4 VEP: 0 Revision: 17
> [drm] PSP loading VCN firmware
> sos fw version = 0x110043.
> [drm] reserve 0x400000 from 0xf41f800000 for PSP TMR
> ugen1.2: <SunplusIT Inc HP TrueVision HD Camera> at usbus1
>
> ugen0.2: <vendor 0x093a USB OPTICAL MOUSE> at usbus0
>
> smu driver if version = 0x0000000b, smu fw if version = 0x0000000e, smu fw version = 0x00373800 (55.56.0)
> SMU driver if version not matched
> SMU is initialized successfully!
> [drm] kiq ring mec 2 pipe 1 q 0
> [drm] Display Core initialized with v3.2.76!
> [drm] DMUB hardware initialized: version=0x01020003
> [drm] Connector eDP-1: get mode from tunables:
> [drm] - kern.vt.fb.modes.eDP-1
> [drm] - kern.vt.fb.default_mode
> [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [drm] VCN decode and encode initialized successfully(under DPG Mode).
> [drm] JPEG decode initialized successfully.
> [drm] fb mappable at 0x230C8D000
> [drm] vram apper at 0x230000000
> [drm] size 8294400
> [drm] fb depth is 24
> [drm] pitch is 7680
> VT: Replacing driver "efifb" with new "fb".
> start FB_INFO:
> type=11 height=1080 width=1920 depth=32
> pbase=0x230c8d000 vbase=0xfffffe00c928d000
> name=drmn1 flags=0x0 stride=7680 bpp=32
> end FB_INFO
> drmn1: ring gfx uses VM inv eng 0 on hub 0
> drmn1: ring comp_1.0.0 uses VM inv eng 1 on hub 0
> drmn1: ring comp_1.1.0 uses VM inv eng 4 on hub 0
> drmn1: ring comp_1.2.0 uses VM inv eng 5 on hub 0
> drmn1: ring comp_1.3.0 uses VM inv eng 6 on hub 0
> drmn1: ring comp_1.0.1 uses VM inv eng 7 on hub 0
> drmn1: ring comp_1.1.1 uses VM inv eng 8 on hub 0
> drmn1: ring comp_1.2.1 uses VM inv eng 9 on hub 0
> drmn1: ring comp_1.3.1 uses VM inv eng 10 on hub 0
> drmn1: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
> drmn1: ring sdma0 uses VM inv eng 0 on hub 1
> drmn1: ring vcn_dec uses VM inv eng 1 on hub 1
> drmn1: ring vcn_enc0 uses VM inv eng 4 on hub 1
> drmn1: ring vcn_enc1 uses VM inv eng 5 on hub 1
> drmn1: ring jpeg_dec uses VM inv eng 6 on hub 1
> sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
> [drm] Initialized amdgpu 3.37.0 20150101 for drmn1 on minor 0
> amdsmn0: <AMD Family 17h System Management Network> on hostb0
>
> amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0
>
> driver bug: Unable to set devclass (class: ppc devname: (unknown))
> ig4iic0: <Designware I2C Controller> iomem 0xfedc5000-0xfedc5fff irq 6 on acpi0
>
> iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0
>
> iicbus0: <unknown card> at addr 0x15
>
> acpi_video1: <ACPI video extension> on vgapci1
>
> driver bug: Unable to set devclass (class: ppc devname: (unknown))
> acpi_wmi0: <ACPI-WMI mapping> on acpi0
>
> acpi_wmi0: Embedded MOF found
> ACPI: \134_SB.WMID.WQAB: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
> acpi_hp0: <HP ACPI-WMI Mapping> on acpi_wmi0
>
> acpi_hp0: HP event GUID detected, installing event handler
> acpi_hp0: HP CMI GUID detected
> nvidia0: <Unknown> on vgapci0
>
> vgapci0: child nvidia0 requested pci_enable_io
> vgapci0: child nvidia0 requested pci_enable_io
> nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 510.47.03 Mon Jan 24 22:33:26 UTC 2022
> intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
>
> smbus0: <System Management Bus> on intsmb0
>
> iichid0: <ELAN0718:01 04F3:30FD I2C HID device> at addr 0x15 on iicbus0
>
> iichid0: Interrupt setup failed. Fallback to sampling
> hidbus0: <HID bus> on iichid0
>
> ugen0.3: <Realtek Bluetooth Radio> at usbus0
>
> lo0: link state changed to UP
> re0: link state changed to DOWN
> re0: link state changed to UP
> ums0 on uhub1
> ums0: <vendor 0x093a USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 1> on usbus0
>
> ums0: 5 buttons and [XYZT] coordinates ID=0
> hms0: <ELAN0718:01 04F3:30FD Mouse> on hidbus0
>
> hms0: 2 buttons and [XY] coordinates ID=1
> hmt0: <ELAN0718:01 04F3:30FD TouchPad> on hidbus0
>
> hconf0: <ELAN0718:01 04F3:30FD Configuration> on hidbus0
>
> hmt0: Multitouch touchpad with 0 external buttons, click-pad
> hmt0: 5 contacts with [C] properties. Report range [0:0] - [3520:1784]
> ubt0 on uhub1
> ubt0: <Bluetooth Radio> on usbus0
>
> WARNING: attempt to domain_add(bluetooth) after domainfinalize()
> WARNING: attempt to domain_add(netgraph) after domainfinalize()
> Security policy loaded: MAC/ntpd (mac_ntpd)
> ACPI Warning: \134_SB.PCI0.GPP0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20201113/nsarguments-212)
> Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process` syncer' to stop...
> Syncing disks, vnodes remaining... 0 0 0 0 0 0 done
> All buffers synced.
> ---<<BOOT>>---
>
> Copyright (c) 1992-2021 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 13.1-STABLE #2 stable/13-n250197-91d751f798d: Fri Apr 1 14:38:19 CEST 2022
> root@zerserk:/usr/obj/usr/src/amd64.amd64/sys/STEEW amd64
> FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
> VT(efifb): resolution 1920x1080
> CPU: AMD Ryzen 5 4600H with Radeon Graphics (2994.47-MHz K8-class CPU)
> Origin="AuthenticAMD" Id=0x860f01 Family=0x17 Model=0x60 Stepping=1
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>
> Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
>
> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
>
> AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
>
> Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
>
> Structured Extended Features2=0x400004<UMIP,RDPID>
>
> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
>
> AMD Extended Feature Extensions ID EBX=0x90cf757<CLZERO,IRPerf,XSaveErPtr,RDPRU,MCOMMIT,WBNOINVD,IBPB,IBRS,STIBP,PREFER_IBRS,SSBD>
>
> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
> TSC: P-state invariant, performance statistics
> real memory = 8589934592 (8192 MB)
> avail memory = 7591792640 (7240 MB)
> Event timer "LAPIC" quality 600
> ACPI APIC Table: <HPQOEM 87B1 >
>
> FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
> FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads
> random: registering fast source Intel Secure Key RNG
> random: fast provider: "Intel Secure Key RNG"
> random: unblocking device.
> ioapic0 <Version 2.1> irqs 0-23
>
> ioapic1 <Version 2.1> irqs 24-55
>
> Launching APs: 8 3 9 1 4 5 11 10 7 6 2
> random: entropy device external interface
> kbd1 at kbdmux0
> efirtc0: <EFI Realtime Clock>
>
> efirtc0: registered as a time-of-day clock, resolution 1.000000s
> aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
>
> acpi0: <HPQOEM SLIC-MPC>
>
> Firmware Error (ACPI): Failure creating named object [\134SMIB], AE_ALREADY_EXISTS (20201113/dsfield-820)
> ACPI Warning: NsLookup: Type mismatch on SMIB (Integer), searching for (RegionField) (20201113/nsaccess-869)
> Firmware Error (ACPI): Could not resolve symbol [\134_SB.PCI0.GPP1.WLAN], AE_NOT_FOUND (20201113/dswload2-315)
> ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20201113/psobject-372)
> acpi0: Power Button (fixed)
> attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
>
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
>
> atrtc0: registered as a time-of-day clock, resolution 1.000000s
> Event timer "RTC" frequency 32768 Hz quality 0
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
>
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 350
> Event timer "HPET1" frequency 14318180 Hz quality 350
> Event timer "HPET2" frequency 14318180 Hz quality 350
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>
> acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
>
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>
> pci0: <ACPI PCI bus> on pcib0
>
> amdsmn0: <AMD Family 17h System Management Network> on hostb0
>
> amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0
>
> pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
>
> pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0
>
> pci1: <ACPI PCI bus> on pcib1
>
> vgapci0: <VGA-compatible display> port 0xf000-0xf07f mem 0xfb000000-0xfbffffff,0xb0000000-0xbfffffff,0xc0000000-0xc1ffffff at device 0.0 on pci1
>
> hdac0: <NVIDIA (0x10fa) HDA Controller> mem 0xfc080000-0xfc083fff at device 0.1 on pci1
>
> pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0
>
> pci2: <ACPI PCI bus> on pcib2
>
> re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfc904000-0xfc904fff,0xfc900000-0xfc903fff at device 0.0 on pci2
>
> re0: Using 1 MSI-X message
> re0: ASPM disabled
> re0: Chip rev. 0x54000000
> re0: MAC rev. 0x00100000
> miibus0: <MII bus> on re0
>
> rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
>
> rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
> re0: Using defaults for TSO: 65518/35/2048
> re0: Ethernet address: b0:5c:da:42:2f:e2
> re0: netmap queues/slots: TX 1/256, RX 1/256
> pcib3: <ACPI PCI-PCI bridge> at device 2.1 on pci0
>
> pci3: <ACPI PCI bus> on pcib3
>
> pci3: <network> at device 0.0 (no driver attached)
>
> pcib4: <ACPI PCI-PCI bridge> at device 2.4 on pci0
>
> pci4: <ACPI PCI bus> on pcib4
>
> nvme0: <Generic NVMe Device> mem 0xfc700000-0xfc703fff at device 0.0 on pci4
>
> pcib5: <ACPI PCI-PCI bridge> at device 8.1 on pci0
>
> pci5: <ACPI PCI bus> on pcib5
>
> vgapci1: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfc500000-0xfc57ffff at device 0.0 on pci5
>
> pci5: <encrypt/decrypt> at device 0.2 (no driver attached)
>
> xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc300000-0xfc3fffff at device 0.3 on pci5
>
> xhci0: 64 bytes context size, 64-bit DMA
> usbus0 on xhci0
> usbus0: 5.0Gbps Super Speed USB v3.0
> xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc200000-0xfc2fffff at device 0.4 on pci5
>
> xhci1: 64 bytes context size, 64-bit DMA
> usbus1 on xhci1
> usbus1: 5.0Gbps Super Speed USB v3.0
> pci5: <multimedia> at device 0.5 (no driver attached)
>
> hdac1: <AMD Raven HDA Controller> mem 0xfc5c0000-0xfc5c7fff at device 0.6 on pci5
>
> pcib6: <ACPI PCI-PCI bridge> at device 8.2 on pci0
>
> pci6: <ACPI PCI bus> on pcib6
>
> ahci0: <AMD KERNCZ AHCI SATA controller> mem 0xfc601000-0xfc6017ff at device 0.0 on pci6
>
> ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
> ahcich0: <AHCI channel> at channel 0 on ahci0
>
> ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfc600000-0xfc6007ff at device 0.1 on pci6
>
> ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
> ahcich1: <AHCI channel> at channel 0 on ahci1
>
> isab0: <PCI-ISA bridge> at device 20.3 on pci0
>
> isa0: <ISA bus> on isab0
>
> acpi_button0: <Power Button> on acpi0
>
> acpi_syscontainer0: <System Container> on acpi0
>
> battery0: <ACPI Control Method Battery> on acpi0
>
> acpi_acad0: <AC Adapter> on acpi0
>
> acpi_lid0: <Control Method Lid Switch> on acpi0
>
> acpi_tz0: <Thermal Zone> on acpi0
>
> ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_PR_.P000 (20201113/dspkginit-605)
> acpi_tz0: _CRT value is absurd, ignored (255.1C)
> cpu0: <ACPI CPU> on acpi0
>
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> hwpstate0: <Cool`n'Quiet 2.0> on cpu0
>
> Timecounters tick every 1.000 msec
> ZFS filesystem version: 5
> ZFS storage pool version: features support (5000)
> hdacc0: <NVIDIA (0x0094) HDA CODEC> at cad 0 on hdac0
>
> ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_PR_.P000 (20201113/dspkginit-605)
> hdaa0: <NVIDIA (0x0094) Audio Function Group> at nid 1 on hdacc0
>
> acpi_tz0: _CRT value is absurd, ignored (255.1C)
> pcm0: <NVIDIA (0x0094) (HDMI/DP 8ch)> at nid 4 on hdaa0
>
> ugen1.1: <AMD XHCI root HUB> at usbus1
>
> uhub0 on usbus1
> uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
>
> ugen0.1: <AMD XHCI root HUB> at usbus0
>
> uhub1 on usbus0
> uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
>
> nvme0: Allocated 61MB host memory buffer
> nvd0: <KBG40ZNV512G KIOXIA> NVMe namespace
>
> nvd0: 488386MB (1000215216 512 byte sectors)
> hdacc1: <Realtek ALC285 HDA CODEC> at cad 0 on hdac1
>
> hdaa1: <Realtek ALC285 Audio Function Group> at nid 1 on hdacc1
>
> GEOM_ELI: Device nvd0p3.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI: Crypto: accelerated software
> pcm1: <Realtek ALC285 (Analog)> at nid 20 and 18 on hdaa1
>
> pcm2: <Realtek ALC285 (Right Analog)> at nid 33 and 25 on hdaa1
>
> Trying to mount root from zfs:zroot/ROOT/13.0-STABLE-20220206.083317 []...
> uhub0: 6 ports with 6 removable, self powered
> uhub1: 6 ports with 6 removable, self powered
> [drm] amdgpu kernel modesetting enabled.
> driver bug: Unable to set devclass (class: ppc devname: (unknown))
> ig4iic0: <Designware I2C Controller> iomem 0xfedc5000-0xfedc5fff irq 6 on acpi0
>
> iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0
>
> ugen1.2: <SunplusIT Inc HP TrueVision HD Camera> at usbus1
>
> iicbus0: <unknown card> at addr 0x15
>
> acpi_video1: <ACPI video extension> on vgapci1
>
> driver bug: Unable to set devclass (class: ppc devname: (unknown))
> acpi_wmi0: <ACPI-WMI mapping> on acpi0
>
> acpi_wmi0: Embedded MOF found
> ACPI: \134_SB.WMID.WQAB: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
> acpi_hp0: <HP ACPI-WMI Mapping> on acpi_wmi0
>
> acpi_hp0: HP event GUID detected, installing event handler
> acpi_hp0: HP CMI GUID detected
> ugen0.2: <vendor 0x093a USB OPTICAL MOUSE> at usbus0
>
> nvidia0: <Unknown> on vgapci0
>
> vgapci0: child nvidia0 requested pci_enable_io
> vgapci0: child nvidia0 requested pci_enable_io
> nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 510.47.03 Mon Jan 24 22:33:26 UTC 2022
> intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
>
> smbus0: <System Management Bus> on intsmb0
>
> rtw880: <rtw_8822ce> port 0xd000-0xd0ff mem 0xfc800000-0xfc80ffff at device 0.0 on pci3
>
> rtw880: successfully loaded firmware image 'rtw88/rtw8822c_fw.bin'
> rtw880: Firmware version 9.9.11, H2C version 15
> iichid0: <ELAN0718:01 04F3:30FD I2C HID device> at addr 0x15 on iicbus0
>
> iichid0: Interrupt setup failed. Fallback to sampling
> hidbus0: <HID bus> on iichid0
>
> lo0: link state changed to UP
> re0: link state changed to DOWN
> ugen0.3: <Realtek Bluetooth Radio> at usbus0
>
> re0: link state changed to UP
> ums0 on uhub1
> ums0: <vendor 0x093a USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 1> on usbus0
>
> ums0: 5 buttons and [XYZT] coordinates ID=0
> hms0: <ELAN0718:01 04F3:30FD Mouse> on hidbus0
>
> hms0: 2 buttons and [XY] coordinates ID=1
> hmt0: <ELAN0718:01 04F3:30FD TouchPad> on hidbus0
>
> hconf0: <ELAN0718:01 04F3:30FD Configuration> on hidbus0
>
> hmt0: Multitouch touchpad with 0 external buttons, click-pad
> hmt0: 5 contacts with [C] properties. Report range [0:0] - [3520:1784]
> ubt0 on uhub1
> ubt0: <Bluetooth Radio> on usbus0
>
> WARNING: attempt to domain_add(bluetooth) after domainfinalize()
> WARNING: attempt to domain_add(netgraph) after domainfinalize()
> Security policy loaded: MAC/ntpd (mac_ntpd)
> Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process` syncer' to stop...
> Syncing disks, vnodes remaining... 0 0 0 0 0 0 done
> All buffers synced.
> ---<<BOOT>>---
>
> Copyright (c) 1992-2021 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 13.1-STABLE #2 stable/13-n250197-91d751f798d: Fri Apr 1 14:38:19 CEST 2022
> root@zerserk:/usr/obj/usr/src/amd64.amd64/sys/STEEW amd64
> FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
> VT(efifb): resolution 1920x1080
> CPU: AMD Ryzen 5 4600H with Radeon Graphics (2994.52-MHz K8-class CPU)
> Origin="AuthenticAMD" Id=0x860f01 Family=0x17 Model=0x60 Stepping=1
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>
> Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
>
> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
>
> AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
>
> Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
>
> Structured Extended Features2=0x400004<UMIP,RDPID>
>
> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
>
> AMD Extended Feature Extensions ID EBX=0x90cf757<CLZERO,IRPerf,XSaveErPtr,RDPRU,MCOMMIT,WBNOINVD,IBPB,IBRS,STIBP,PREFER_IBRS,SSBD>
>
> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
> TSC: P-state invariant, performance statistics
> real memory = 8589934592 (8192 MB)
> avail memory = 7591788544 (7240 MB)
> Event timer "LAPIC" quality 600
> ACPI APIC Table: <HPQOEM 87B1 >
>
> FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
> FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads
> random: registering fast source Intel Secure Key RNG
> random: fast provider: "Intel Secure Key RNG"
> random: unblocking device.
> ioapic0 <Version 2.1> irqs 0-23
>
> ioapic1 <Version 2.1> irqs 24-55
>
> Launching APs: 7 1 9 8 6 5 4 11 10 2 3
> random: entropy device external interface
> kbd1 at kbdmux0
> efirtc0: <EFI Realtime Clock>
>
> efirtc0: registered as a time-of-day clock, resolution 1.000000s
> aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
>
> acpi0: <HPQOEM SLIC-MPC>
>
> Firmware Error (ACPI): Failure creating named object [\134SMIB], AE_ALREADY_EXISTS (20201113/dsfield-820)
> ACPI Warning: NsLookup: Type mismatch on SMIB (Integer), searching for (RegionField) (20201113/nsaccess-869)
> Firmware Error (ACPI): Could not resolve symbol [\134_SB.PCI0.GPP1.WLAN], AE_NOT_FOUND (20201113/dswload2-315)
> ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20201113/psobject-372)
> acpi0: Power Button (fixed)
> attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
>
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
>
> atrtc0: registered as a time-of-day clock, resolution 1.000000s
> Event timer "RTC" frequency 32768 Hz quality 0
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
>
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 350
> Event timer "HPET1" frequency 14318180 Hz quality 350
> Event timer "HPET2" frequency 14318180 Hz quality 350
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>
> acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
>
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>
> pci0: <ACPI PCI bus> on pcib0
>
> amdsmn0: <AMD Family 17h System Management Network> on hostb0
>
> amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0
>
> pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
>
> pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0
>
> pci1: <ACPI PCI bus> on pcib1
>
> vgapci0: <VGA-compatible display> port 0xf000-0xf07f mem 0xfb000000-0xfbffffff,0xb0000000-0xbfffffff,0xc0000000-0xc1ffffff at device 0.0 on pci1
>
> hdac0: <NVIDIA (0x10fa) HDA Controller> mem 0xfc080000-0xfc083fff at device 0.1 on pci1
>
> pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0
>
> pci2: <ACPI PCI bus> on pcib2
>
> re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfc904000-0xfc904fff,0xfc900000-0xfc903fff at device 0.0 on pci2
>
> re0: Using 1 MSI-X message
> re0: ASPM disabled
> re0: Chip rev. 0x54000000
> re0: MAC rev. 0x00100000
> miibus0: <MII bus> on re0
>
> rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
>
> rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
> re0: Using defaults for TSO: 65518/35/2048
> re0: Ethernet address: b0:5c:da:42:2f:e2
> re0: netmap queues/slots: TX 1/256, RX 1/256
> pcib3: <ACPI PCI-PCI bridge> at device 2.1 on pci0
>
> pci3: <ACPI PCI bus> on pcib3
>
> pci3: <network> at device 0.0 (no driver attached)
>
> pcib4: <ACPI PCI-PCI bridge> at device 2.4 on pci0
>
> pci4: <ACPI PCI bus> on pcib4
>
> nvme0: <Generic NVMe Device> mem 0xfc700000-0xfc703fff at device 0.0 on pci4
>
> pcib5: <ACPI PCI-PCI bridge> at device 8.1 on pci0
>
> pci5: <ACPI PCI bus> on pcib5
>
> vgapci1: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfc500000-0xfc57ffff at device 0.0 on pci5
>
> pci5: <encrypt/decrypt> at device 0.2 (no driver attached)
>
> xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc300000-0xfc3fffff at device 0.3 on pci5
>
> xhci0: 64 bytes context size, 64-bit DMA
> usbus0 on xhci0
> usbus0: 5.0Gbps Super Speed USB v3.0
> xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc200000-0xfc2fffff at device 0.4 on pci5
>
> xhci1: 64 bytes context size, 64-bit DMA
> usbus1 on xhci1
> usbus1: 5.0Gbps Super Speed USB v3.0
> pci5: <multimedia> at device 0.5 (no driver attached)
>
> hdac1: <AMD Raven HDA Controller> mem 0xfc5c0000-0xfc5c7fff at device 0.6 on pci5
>
> pcib6: <ACPI PCI-PCI bridge> at device 8.2 on pci0
>
> pci6: <ACPI PCI bus> on pcib6
>
> ahci0: <AMD KERNCZ AHCI SATA controller> mem 0xfc601000-0xfc6017ff at device 0.0 on pci6
>
> ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
> ahcich0: <AHCI channel> at channel 0 on ahci0
>
> ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfc600000-0xfc6007ff at device 0.1 on pci6
>
> ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
> ahcich1: <AHCI channel> at channel 0 on ahci1
>
> isab0: <PCI-ISA bridge> at device 20.3 on pci0
>
> isa0: <ISA bus> on isab0
>
> acpi_button0: <Power Button> on acpi0
>
> acpi_syscontainer0: <System Container> on acpi0
>
> battery0: <ACPI Control Method Battery> on acpi0
>
> acpi_acad0: <AC Adapter> on acpi0
>
> acpi_lid0: <Control Method Lid Switch> on acpi0
>
> acpi_tz0: <Thermal Zone> on acpi0
>
> ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_PR_.P000 (20201113/dspkginit-605)
> acpi_tz0: _CRT value is absurd, ignored (255.1C)
> cpu0: <ACPI CPU> on acpi0
>
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> hwpstate0: <Cool`n'Quiet 2.0> on cpu0
>
> Timecounters tick every 1.000 msec
> ZFS filesystem version: 5
> ZFS storage pool version: features support (5000)
> ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_PR_.P000 (20201113/dspkginit-605)
> acpi_tz0: _CRT value is absurd, ignored (255.1C)
> hdacc0: <NVIDIA (0x0094) HDA CODEC> at cad 0 on hdac0
>
> hdaa0: <NVIDIA (0x0094) Audio Function Group> at nid 1 on hdacc0
>
> pcm0: <NVIDIA (0x0094) (HDMI/DP 8ch)> at nid 4 on hdaa0
>
> ugen0.1: <AMD XHCI root HUB> at usbus0
>
> uhub0 on usbus0
> uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
>
> ugen1.1: <AMD XHCI root HUB> at usbus1
>
> uhub1 on usbus1
> uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
>
> nvme0: Allocated 61MB host memory buffer
> nvd0: <KBG40ZNV512G KIOXIA> NVMe namespace
>
> nvd0: 488386MB (1000215216 512 byte sectors)
> hdacc1: <Realtek ALC285 HDA CODEC> at cad 0 on hdac1
>
> hdaa1: <Realtek ALC285 Audio Function Group> at nid 1 on hdacc1
>
> GEOM_ELI: Device nvd0p3.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI: Crypto: accelerated software
> pcm1: <Realtek ALC285 (Analog)> at nid 20 and 18 on hdaa1
>
> pcm2: <Realtek ALC285 (Right Analog)> at nid 33 and 25 on hdaa1
>
> Trying to mount root from zfs:zroot/ROOT/13.0-STABLE-20220206.083317 []...
> uhub1: 6 ports with 6 removable, self powered
> uhub0: 6 ports with 6 removable, self powered
> [drm] amdgpu kernel modesetting enabled.
> drmn1: <drmn> on vgapci1
>
> vgapci1: child drmn1 requested pci_enable_io
> vgapci1: child drmn1 requested pci_enable_io
> [drm] initializing kernel modesetting (RENOIR 0x1002:0x1636 0x103C:0x87B1 0xC7).
> [drm] register mmio base: 0xFC500000
> [drm] register mmio size: 524288
> [drm] add ip block number 0 <soc15_common>
>
> [drm] add ip block number 1 <gmc_v9_0>
>
> [drm] add ip block number 2 <vega10_ih>
>
> [drm] add ip block number 3 <psp>
>
> [drm] add ip block number 4 <smu>
>
> [drm] add ip block number 5 <gfx_v9_0>
>
> [drm] add ip block number 6 <sdma_v4_0>
>
> [drm] add ip block number 7 <dm>
>
> [drm] add ip block number 8 <vcn_v2_0>
>
> [drm] add ip block number 9 <jpeg_v2_0>
>
> drmn1: successfully loaded firmware image 'amdgpu/renoir_gpu_info.bin'
> ATOM BIOS: 113-RENOIR-025
> drmn1: successfully loaded firmware image 'amdgpu/renoir_sdma.bin'
> [drm] VCN decode is enabled in VM mode
> [drm] VCN encode is enabled in VM mode
> [drm] JPEG decode is enabled in VM mode
> [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
> drmn1: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
> drmn1: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
> drmn1: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
> [drm] Detected VRAM RAM=512M, BAR=512M
> [drm] RAM width 128bits DDR4
> [TTM] Zone kernel: Available graphics memory: 3838036 KiB
> [TTM] Zone dma32: Available graphics memory: 2097152 KiB
> [TTM] Initializing pool allocator
> [drm] amdgpu: 512M of VRAM memory ready
> [drm] amdgpu: 3072M of GTT memory ready.
> [drm] GART: num cpu pages 262144, num gpu pages 262144
> [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
> drmn1: successfully loaded firmware image 'amdgpu/renoir_asd.bin'
> drmn1: successfully loaded firmware image 'amdgpu/renoir_pfp.bin'
> drmn1: successfully loaded firmware image 'amdgpu/renoir_me.bin'
> drmn1: successfully loaded firmware image 'amdgpu/renoir_ce.bin'
> drmn1: successfully loaded firmware image 'amdgpu/renoir_rlc.bin'
> drmn1: successfully loaded firmware image 'amdgpu/renoir_mec.bin'
> drmn1: successfully loaded firmware image 'amdgpu/renoir_mec2.bin'
> [drm] use_doorbell being set to: [true]
> drmn1: successfully loaded firmware image 'amdgpu/renoir_dmcub.bin'
> [drm] Loading DMUB firmware via PSP: version=0x00000000
> ugen1.2: <SunplusIT Inc HP TrueVision HD Camera> at usbus1
>
> drmn1: successfully loaded firmware image 'amdgpu/renoir_vcn.bin'
> [drm] Found VCN firmware Version ENC: 1.7 DEC: 4 VEP: 0 Revision: 17
> [drm] PSP loading VCN firmware
> sos fw version = 0x110043.
> [drm] reserve 0x400000 from 0xf41f800000 for PSP TMR
> ugen0.2: <vendor 0x093a USB OPTICAL MOUSE> at usbus0
>
> smu driver if version = 0x0000000b, smu fw if version = 0x0000000e, smu fw version = 0x00373800 (55.56.0)
> SMU driver if version not matched
> SMU is initialized successfully!
> [drm] kiq ring mec 2 pipe 1 q 0
> [drm] Display Core initialized with v3.2.76!
> [drm] DMUB hardware initialized: version=0x01020003
> [drm] Connector eDP-1: get mode from tunables:
> [drm] - kern.vt.fb.modes.eDP-1
> [drm] - kern.vt.fb.default_mode
> [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [drm] VCN decode and encode initialized successfully(under DPG Mode).
> [drm] JPEG decode initialized successfully.
> [drm] fb mappable at 0x230C8D000
> [drm] vram apper at 0x230000000
> [drm] size 8294400
> [drm] fb depth is 24
> [drm] pitch is 7680
> VT: Replacing driver "efifb" with new "fb".
> start FB_INFO:
> type=11 height=1080 width=1920 depth=32
> pbase=0x230c8d000 vbase=0xfffffe00c908d000
> name=drmn1 flags=0x0 stride=7680 bpp=32
> end FB_INFO
> drmn1: ring gfx uses VM inv eng 0 on hub 0
> drmn1: ring comp_1.0.0 uses VM inv eng 1 on hub 0
> drmn1: ring comp_1.1.0 uses VM inv eng 4 on hub 0
> drmn1: ring comp_1.2.0 uses VM inv eng 5 on hub 0
> drmn1: ring comp_1.3.0 uses VM inv eng 6 on hub 0
> drmn1: ring comp_1.0.1 uses VM inv eng 7 on hub 0
> drmn1: ring comp_1.1.1 uses VM inv eng 8 on hub 0
> drmn1: ring comp_1.2.1 uses VM inv eng 9 on hub 0
> drmn1: ring comp_1.3.1 uses VM inv eng 10 on hub 0
> drmn1: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
> drmn1: ring sdma0 uses VM inv eng 0 on hub 1
> drmn1: ring vcn_dec uses VM inv eng 1 on hub 1
> drmn1: ring vcn_enc0 uses VM inv eng 4 on hub 1
> drmn1: ring vcn_enc1 uses VM inv eng 5 on hub 1
> drmn1: ring jpeg_dec uses VM inv eng 6 on hub 1
> sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
> [drm] Initialized amdgpu 3.37.0 20150101 for drmn1 on minor 0
> driver bug: Unable to set devclass (class: ppc devname: (unknown))
> ig4iic0: <Designware I2C Controller> iomem 0xfedc5000-0xfedc5fff irq 6 on acpi0
>
> iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0
>
> iicbus0: <unknown card> at addr 0x15
>
> acpi_video1: <ACPI video extension> on vgapci1
>
> driver bug: Unable to set devclass (class: ppc devname: (unknown))
> acpi_wmi0: <ACPI-WMI mapping> on acpi0
>
> acpi_wmi0: Embedded MOF found
> ACPI: \134_SB.WMID.WQAB: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
> acpi_hp0: <HP ACPI-WMI Mapping> on acpi_wmi0
>
> acpi_hp0: HP event GUID detected, installing event handler
> acpi_hp0: HP CMI GUID detected
> nvidia0: <Unknown> on vgapci0
>
> vgapci0: child nvidia0 requested pci_enable_io
> vgapci0: child nvidia0 requested pci_enable_io
> nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 510.47.03 Mon Jan 24 22:33:26 UTC 2022
> intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
>
> smbus0: <System Management Bus> on intsmb0
>
> rtw880: <rtw_8822ce> port 0xd000-0xd0ff mem 0xfc800000-0xfc80ffff at device 0.0 on pci3
>
> rtw880: successfully loaded firmware image 'rtw88/rtw8822c_fw.bin'
> rtw880: Firmware version 9.9.11, H2C version 15
> rtw880: failed to init rx buffer
> rtw880: failed to allocate pci resources
> rtw880: failed to setup pci resources
> device_attach: rtw880 attach returned 16
> rtw880: <rtw_8822ce> port 0xd000-0xd0ff mem 0xfc800000-0xfc80ffff at device 0.0 on pci3
>
> rtw880: successfully loaded firmware image 'rtw88/rtw8822c_fw.bin'
> rtw880: Firmware version 9.9.11, H2C version 15
> rtw880: failed to init rx buffer
> rtw880: failed to allocate pci resources
> rtw880: failed to setup pci resources
> device_attach: rtw880 attach returned 16
> rtw880: <rtw_8822ce> port 0xd000-0xd0ff mem 0xfc800000-0xfc80ffff at device 0.0 on pci3
>
> rtw880: successfully loaded firmware image 'rtw88/rtw8822c_fw.bin'
> rtw880: Firmware version 9.9.11, H2C version 15
> iichid0: <ELAN0718:01 04F3:30FD I2C HID device> at addr 0x15 on iicbus0
>
> iichid0: Interrupt setup failed. Fallback to sampling
> hidbus0: <HID bus> on iichid0
>
> ugen0.3: <Realtek Bluetooth Radio> at usbus0
>
> lo0: link state changed to UP
> re0: link state changed to DOWN
> re0: link state changed to UP
> ums0 on uhub0
> ums0: <vendor 0x093a USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 1> on usbus0
>
> ums0: 5 buttons and [XYZT] coordinates ID=0
> ubt0 on uhub0
> ubt0: <Bluetooth Radio> on usbus0
>
> hms0: <ELAN0718:01 04F3:30FD Mouse> on hidbus0
>
> hms0: 2 buttons and [XY] coordinates ID=1
> hmt0: <ELAN0718:01 04F3:30FD TouchPad> on hidbus0
>
> hconf0: <ELAN0718:01 04F3:30FD Configuration> on hidbus0
>
> hmt0: Multitouch touchpad with 0 external buttons, click-pad
> hmt0: 5 contacts with [C] properties. Report range [0:0] - [3520:1784]
> WARNING: attempt to domain_add(bluetooth) after domainfinalize()
> WARNING: attempt to domain_add(netgraph) after domainfinalize()
> Security policy loaded: MAC/ntpd (mac_ntpd)
> ACPI Warning: \134_SB.PCI0.GPP0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20201113/nsarguments-212)
> rtw880: failed to write rsvd page data
> rtw880: failed to write data to rsvd page
> rtw880: failed to download rsvd page
> rtw880: failed to download firmware
> lkpi_ic_vap_create: failed to start hw: -16
> rtw880: failed to write rsvd page data
> rtw880: failed to write data to rsvd page
> rtw880: failed to download rsvd page
> rtw880: failed to download firmware
> lkpi_ic_vap_create: failed to start hw: -16
>
>
>
> dmesg PHYSMEM:
>
> Copyright (c) 1992-2021 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 13.1-STABLE #2 stable/13-n250197-91d751f798d: Fri Apr 1 14:38:19 CEST 2022
> root@zerserk:/usr/obj/usr/src/amd64.amd64/sys/STEEW amd64
> FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303)
> VT(efifb): resolution 1920x1080
> Setting sysctl vfs.zfs.arc_max failed: 22
> CPU: AMD Ryzen 5 4600H with Radeon Graphics (2994.45-MHz K8-class CPU)
> Origin="AuthenticAMD" Id=0x860f01 Family=0x17 Model=0x60 Stepping=1
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>
> Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
>
> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
>
> AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
>
> Structured Extended Features=0x219c91a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
>
> Structured Extended Features2=0x400004<UMIP,RDPID>
>
> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
>
> AMD Extended Feature Extensions ID EBX=0x90cf757<CLZERO,IRPerf,XSaveErPtr,RDPRU,MCOMMIT,WBNOINVD,IBPB,IBRS,STIBP,PREFER_IBRS,SSBD>
>
> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
> TSC: P-state invariant, performance statistics
> real memory = 8589934592 (8192 MB)
> avail memory = 2684170240 (2559 MB)
> Event timer "LAPIC" quality 600
> ACPI APIC Table: <HPQOEM 87B1 >
>
> FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
> FreeBSD/SMP: 1 package(s) x 2 cache groups x 3 core(s) x 2 hardware threads
> random: registering fast source Intel Secure Key RNG
> random: fast provider: "Intel Secure Key RNG"
> random: unblocking device.
> ioapic0 <Version 2.1> irqs 0-23
>
> ioapic1 <Version 2.1> irqs 24-55
>
> Launching APs: 8 4 11 10 9 2 3 1 7 5 6
> random: entropy device external interface
> kbd1 at kbdmux0
> efirtc0: <EFI Realtime Clock>
>
> efirtc0: registered as a time-of-day clock, resolution 1.000000s
> aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
>
> acpi0: <HPQOEM SLIC-MPC>
>
> Firmware Error (ACPI): Failure creating named object [\134SMIB], AE_ALREADY_EXISTS (20201113/dsfield-820)
> ACPI Warning: NsLookup: Type mismatch on SMIB (Integer), searching for (RegionField) (20201113/nsaccess-869)
> Firmware Error (ACPI): Could not resolve symbol [\134_SB.PCI0.GPP1.WLAN], AE_NOT_FOUND (20201113/dswload2-315)
> ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20201113/psobject-372)
> acpi0: Power Button (fixed)
> attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
>
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
>
> atrtc0: registered as a time-of-day clock, resolution 1.000000s
> Event timer "RTC" frequency 32768 Hz quality 0
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
>
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 350
> Event timer "HPET1" frequency 14318180 Hz quality 350
> Event timer "HPET2" frequency 14318180 Hz quality 350
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>
> acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
>
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>
> pci0: <ACPI PCI bus> on pcib0
>
> amdsmn0: <AMD Family 17h System Management Network> on hostb0
>
> amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0
>
> pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
>
> pcib1: <ACPI PCI-PCI bridge> at device 1.1 on pci0
>
> pci1: <ACPI PCI bus> on pcib1
>
> vgapci0: <VGA-compatible display> port 0xf000-0xf07f mem 0xfb000000-0xfbffffff,0xb0000000-0xbfffffff,0xc0000000-0xc1ffffff at device 0.0 on pci1
>
> hdac0: <NVIDIA (0x10fa) HDA Controller> mem 0xfc080000-0xfc083fff at device 0.1 on pci1
>
> pcib2: <ACPI PCI-PCI bridge> at device 1.2 on pci0
>
> pci2: <ACPI PCI bus> on pcib2
>
> re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xfc904000-0xfc904fff,0xfc900000-0xfc903fff at device 0.0 on pci2
>
> re0: Using 1 MSI-X message
> re0: ASPM disabled
> re0: Chip rev. 0x54000000
> re0: MAC rev. 0x00100000
> miibus0: <MII bus> on re0
>
> rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
>
> rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
> re0: Using defaults for TSO: 65518/35/2048
> re0: Ethernet address: b0:5c:da:42:2f:e2
> re0: netmap queues/slots: TX 1/256, RX 1/256
> pcib3: <ACPI PCI-PCI bridge> at device 2.1 on pci0
>
> pci3: <ACPI PCI bus> on pcib3
>
> pci3: <network> at device 0.0 (no driver attached)
>
> pcib4: <ACPI PCI-PCI bridge> at device 2.4 on pci0
>
> pci4: <ACPI PCI bus> on pcib4
>
> nvme0: <Generic NVMe Device> mem 0xfc700000-0xfc703fff at device 0.0 on pci4
>
> pcib5: <ACPI PCI-PCI bridge> at device 8.1 on pci0
>
> pci5: <ACPI PCI bus> on pcib5
>
> vgapci1: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xe0000000-0xe01fffff,0xfc500000-0xfc57ffff at device 0.0 on pci5
>
> pci5: <encrypt/decrypt> at device 0.2 (no driver attached)
>
> xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc300000-0xfc3fffff at device 0.3 on pci5
>
> xhci0: 64 bytes context size, 64-bit DMA
> usbus0 on xhci0
> usbus0: 5.0Gbps Super Speed USB v3.0
> xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc200000-0xfc2fffff at device 0.4 on pci5
>
> xhci1: 64 bytes context size, 64-bit DMA
> usbus1 on xhci1
> usbus1: 5.0Gbps Super Speed USB v3.0
> pci5: <multimedia> at device 0.5 (no driver attached)
>
> hdac1: <AMD Raven HDA Controller> mem 0xfc5c0000-0xfc5c7fff at device 0.6 on pci5
>
> pcib6: <ACPI PCI-PCI bridge> at device 8.2 on pci0
>
> pci6: <ACPI PCI bus> on pcib6
>
> ahci0: <AMD KERNCZ AHCI SATA controller> mem 0xfc601000-0xfc6017ff at device 0.0 on pci6
>
> ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
> ahcich0: <AHCI channel> at channel 0 on ahci0
>
> ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfc600000-0xfc6007ff at device 0.1 on pci6
>
> ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
> ahcich1: <AHCI channel> at channel 0 on ahci1
>
> isab0: <PCI-ISA bridge> at device 20.3 on pci0
>
> isa0: <ISA bus> on isab0
>
> acpi_button0: <Power Button> on acpi0
>
> acpi_syscontainer0: <System Container> on acpi0
>
> battery0: <ACPI Control Method Battery> on acpi0
>
> acpi_acad0: <AC Adapter> on acpi0
>
> acpi_lid0: <Control Method Lid Switch> on acpi0
>
> acpi_tz0: <Thermal Zone> on acpi0
>
> ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_PR_.P000 (20201113/dspkginit-605)
> acpi_tz0: _CRT value is absurd, ignored (255.1C)
> cpu0: <ACPI CPU> on acpi0
>
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> hwpstate0: <Cool`n'Quiet 2.0> on cpu0
>
> Timecounters tick every 1.000 msec
> ZFS filesystem version: 5
> ZFS storage pool version: features support (5000)
> ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_PR_.P000 (20201113/dspkginit-605)
> acpi_tz0: _CRT value is absurd, ignored (255.1C)
> hdacc0: <NVIDIA (0x0094) HDA CODEC> at cad 0 on hdac0
>
> hdaa0: <NVIDIA (0x0094) Audio Function Group> at nid 1 on hdacc0
>
> pcm0: <NVIDIA (0x0094) (HDMI/DP 8ch)> at nid 4 on hdaa0
>
> ugen1.1: <AMD XHCI root HUB> at usbus1
>
> uhub0 on usbus1
> uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
>
> ugen0.1: <AMD XHCI root HUB> at usbus0
>
> uhub1 on usbus0
> uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
>
> nvme0: Allocated 61MB host memory buffer
> nvd0: <KBG40ZNV512G KIOXIA> NVMe namespace
>
> nvd0: 488386MB (1000215216 512 byte sectors)
> hdacc1: <Realtek ALC285 HDA CODEC> at cad 0 on hdac1
>
> hdaa1: <Realtek ALC285 Audio Function Group> at nid 1 on hdacc1
>
> GEOM_ELI: Device nvd0p3.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI: Crypto: accelerated software
> pcm1: <Realtek ALC285 (Analog)> at nid 20 and 18 on hdaa1
>
> pcm2: <Realtek ALC285 (Right Analog)> at nid 33 and 25 on hdaa1
>
> Trying to mount root from zfs:zroot/ROOT/13.0-STABLE-20220206.083317 []...
> uhub0: 6 ports with 6 removable, self powered
> uhub1: 6 ports with 6 removable, self powered
> [drm] amdgpu kernel modesetting enabled.
> drmn1: <drmn> on vgapci1
>
> vgapci1: child drmn1 requested pci_enable_io
> vgapci1: child drmn1 requested pci_enable_io
> [drm] initializing kernel modesetting (RENOIR 0x1002:0x1636 0x103C:0x87B1 0xC7).
> [drm] register mmio base: 0xFC500000
> [drm] register mmio size: 524288
> [drm] add ip block number 0 <soc15_common>
>
> [drm] add ip block number 1 <gmc_v9_0>
>
> [drm] add ip block number 2 <vega10_ih>
>
> [drm] add ip block number 3 <psp>
>
> [drm] add ip block number 4 <smu>
>
> [drm] add ip block number 5 <gfx_v9_0>
>
> [drm] add ip block number 6 <sdma_v4_0>
>
> [drm] add ip block number 7 <dm>
>
> [drm] add ip block number 8 <vcn_v2_0>
>
> [drm] add ip block number 9 <jpeg_v2_0>
>
> drmn1: successfully loaded firmware image 'amdgpu/renoir_gpu_info.bin'
> ATOM BIOS: 113-RENOIR-025
> drmn1: successfully loaded firmware image 'amdgpu/renoir_sdma.bin'
> [drm] VCN decode is enabled in VM mode
> [drm] VCN encode is enabled in VM mode
> [drm] JPEG decode is enabled in VM mode
> [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
> drmn1: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
> drmn1: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
> drmn1: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
> [drm] Detected VRAM RAM=512M, BAR=512M
> [drm] RAM width 128bits DDR4
> [TTM] Zone kernel: Available graphics memory: 1354196 KiB
> [TTM] Initializing pool allocator
> [drm] amdgpu: 512M of VRAM memory ready
> [drm] amdgpu: 1983M of GTT memory ready.
> [drm] GART: num cpu pages 262144, num gpu pages 262144
> [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
> drmn1: successfully loaded firmware image 'amdgpu/renoir_asd.bin'
> drmn1: successfully loaded firmware image 'amdgpu/renoir_pfp.bin'
> drmn1: successfully loaded firmware image 'amdgpu/renoir_me.bin'
> drmn1: successfully loaded firmware image 'amdgpu/renoir_ce.bin'
> drmn1: successfully loaded firmware image 'amdgpu/renoir_rlc.bin'
> drmn1: successfully loaded firmware image 'amdgpu/renoir_mec.bin'
> drmn1: successfully loaded firmware image 'amdgpu/renoir_mec2.bin'
> [drm] use_doorbell being set to: [true]
> drmn1: successfully loaded firmware image 'amdgpu/renoir_dmcub.bin'
> [drm] Loading DMUB firmware via PSP: version=0x00000000
> drmn1: successfully loaded firmware image 'amdgpu/renoir_vcn.bin'
> [drm] Found VCN firmware Version ENC: 1.7 DEC: 4 VEP: 0 Revision: 17
> [drm] PSP loading VCN firmware
> sos fw version = 0x110043.
> [drm] reserve 0x400000 from 0xf41f800000 for PSP TMR
> ugen1.2: <SunplusIT Inc HP TrueVision HD Camera> at usbus1
>
> ugen0.2: <vendor 0x093a USB OPTICAL MOUSE> at usbus0
>
> smu driver if version = 0x0000000b, smu fw if version = 0x0000000e, smu fw version = 0x00373800 (55.56.0)
> SMU driver if version not matched
> SMU is initialized successfully!
> [drm] kiq ring mec 2 pipe 1 q 0
> [drm] Display Core initialized with v3.2.76!
> [drm] DMUB hardware initialized: version=0x01020003
> [drm] Connector eDP-1: get mode from tunables:
> [drm] - kern.vt.fb.modes.eDP-1
> [drm] - kern.vt.fb.default_mode
> [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [drm] VCN decode and encode initialized successfully(under DPG Mode).
> [drm] JPEG decode initialized successfully.
> [drm] fb mappable at 0x230C8D000
> [drm] vram apper at 0x230000000
> [drm] size 8294400
> [drm] fb depth is 24
> [drm] pitch is 7680
> VT: Replacing driver "efifb" with new "fb".
> start FB_INFO:
> type=11 height=1080 width=1920 depth=32
> pbase=0x230c8d000 vbase=0xfffffe009aa8d000
> name=drmn1 flags=0x0 stride=7680 bpp=32
> end FB_INFO
> drmn1: ring gfx uses VM inv eng 0 on hub 0
> drmn1: ring comp_1.0.0 uses VM inv eng 1 on hub 0
> drmn1: ring comp_1.1.0 uses VM inv eng 4 on hub 0
> drmn1: ring comp_1.2.0 uses VM inv eng 5 on hub 0
> drmn1: ring comp_1.3.0 uses VM inv eng 6 on hub 0
> drmn1: ring comp_1.0.1 uses VM inv eng 7 on hub 0
> drmn1: ring comp_1.1.1 uses VM inv eng 8 on hub 0
> drmn1: ring comp_1.2.1 uses VM inv eng 9 on hub 0
> drmn1: ring comp_1.3.1 uses VM inv eng 10 on hub 0
> drmn1: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
> drmn1: ring sdma0 uses VM inv eng 0 on hub 1
> drmn1: ring vcn_dec uses VM inv eng 1 on hub 1
> drmn1: ring vcn_enc0 uses VM inv eng 4 on hub 1
> drmn1: ring vcn_enc1 uses VM inv eng 5 on hub 1
> drmn1: ring jpeg_dec uses VM inv eng 6 on hub 1
> sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
> [drm] Initialized amdgpu 3.37.0 20150101 for drmn1 on minor 0
> driver bug: Unable to set devclass (class: ppc devname: (unknown))
> ig4iic0: <Designware I2C Controller> iomem 0xfedc5000-0xfedc5fff irq 6 on acpi0
>
> iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0
>
> iicbus0: <unknown card> at addr 0x15
>
> acpi_video1: <ACPI video extension> on vgapci1
>
> driver bug: Unable to set devclass (class: ppc devname: (unknown))
> acpi_wmi0: <ACPI-WMI mapping> on acpi0
>
> acpi_wmi0: Embedded MOF found
> ACPI: \134_SB.WMID.WQAB: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361)
> acpi_hp0: <HP ACPI-WMI Mapping> on acpi_wmi0
>
> acpi_hp0: HP event GUID detected, installing event handler
> acpi_hp0: HP CMI GUID detected
> nvidia0: <Unknown> on vgapci0
>
> vgapci0: child nvidia0 requested pci_enable_io
> vgapci0: child nvidia0 requested pci_enable_io
> nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 510.47.03 Mon Jan 24 22:33:26 UTC 2022
> intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
>
> smbus0: <System Management Bus> on intsmb0
>
> rtw880: <rtw_8822ce> port 0xd000-0xd0ff mem 0xfc800000-0xfc80ffff at device 0.0 on pci3
>
> rtw880: successfully loaded firmware image 'rtw88/rtw8822c_fw.bin'
> rtw880: Firmware version 9.9.11, H2C version 15
> iichid0: <ELAN0718:01 04F3:30FD I2C HID device> at addr 0x15 on iicbus0
>
> iichid0: Interrupt setup failed. Fallback to sampling
> hidbus0: <HID bus> on iichid0
>
> ugen0.3: <Realtek Bluetooth Radio> at usbus0
>
> lo0: link state changed to UP
> re0: link state changed to DOWN
> re0: link state changed to UP
> ums0 on uhub1
> ums0: <vendor 0x093a USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 1> on usbus0
>
> ums0: 5 buttons and [XYZT] coordinates ID=0
> ubt0 on uhub1
> ubt0: <Bluetooth Radio> on usbus0
>
> hms0: <ELAN0718:01 04F3:30FD Mouse> on hidbus0
>
> hms0: 2 buttons and [XY] coordinates ID=1
> hmt0: <ELAN0718:01 04F3:30FD TouchPad> on hidbus0
>
> hconf0: <ELAN0718:01 04F3:30FD Configuration> on hidbus0
>
> hmt0: Multitouch touchpad with 0 external buttons, click-pad
> hmt0: 5 contacts with [C] properties. Report range [0:0] - [3520:1784]
> WARNING: attempt to domain_add(bluetooth) after domainfinalize()
> WARNING: attempt to domain_add(netgraph) after domainfinalize()
> Security policy loaded: MAC/ntpd (mac_ntpd)
> ACPI Warning: \134_SB.PCI0.GPP0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20201113/nsarguments-212)
> rtw880: start vif 8c:c8:4b:59:ee:75 on port 0
> wlan0: Ethernet address: 8c:c8:4b:59:ee:75
>
>
> ifconfig with PHYSMEM:
>
> wlan0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
>
> ether 8c:c8:4b:59:ee:75
> groups: wlan
> ssid "" channel 1 (2412 MHz 11b)
> regdomain FCC country US authmode OPEN privacy OFF txpower 30 bmiss 7
> scanvalid 60 wme bintval 0
> parent interface: rtw880
> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
> status: no carrier
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>
>
>
>
>
> ------- Original Message -------
> On Friday, April 1st, 2022 at 12:43 PM, Bjoern A. Zeeb bzeeb-lists@lists.zabbadoz.net wrote:
>
>
>
> > On Fri, 1 Apr 2022, Daniel Pérez wrote:
> >
> > > As always, thank you for your hard work, Bjoern.
> > > Will test the mentioned stuff as soon as I am able to, hopefully I can get it built in STABLE/13.
> >
> > git cherry-pick -x 86220d3cbd500b1018dcdabb0ba70644db438cfd (until the next days)
> > git cherry-pick -x 2774f206809b8fd3a4904fe945f029a414fbc642
> > git cherry-pick -x 73d4ebea3567f18db549638c3d897b6d6758faa4
> > git cherry-pick -x 20eeed6844e2ab82b909e02c720101297e78d916
> >
> > merges without problems on a stable/13 for me. I'll start a build as
> > well but I am not expecting surprises.
> >
> > Hope this helps.
> > Bjoern
> >
> > --
> > Bjoern A. Zeeb r15:7