RE: Bhyve CD-ROM

Does your system boot without the ISO file?
In order to boot Debian you have to move your bootloader: https://blahg.josefsipek.net/?p=595

This is not a Debian bug, but rather bhyve’s EFI support being incomplete. The easiest way around this is to copy the Debian binary into the standard location immediately after installation. In other words:

# cd /boot/efi/EFI
# mkdir BOOT
# cp debian/grubx64.efi BOOT/bootx64.efi


Best regards
Corvin

Beckhoff Automation GmbH & Co. KG | Managing Director: Dipl. Phys. Hans Beckhoff
Registered office: Verl, Germany | Register court: Guetersloh HRA 7075


-----Original Message-----
From: Sysadmin Lists <sysadmin.lists@mailfence.com>
Sent: Monday, November 29, 2021 11:32 PM
To: Mario Marietto <marietto2008@gmail.com>
Cc: Corvin Köhne <C.Koehne@beckhoff.com>; Freebsd Virtualization <freebsd-virtualization@freebsd.org>
Subject: Re: Bhyve CD-ROM

CAUTION: External Email!!
Indeed it has. I'll go with passing a new virtual disk with the CD contents on it, and keep the working ISO for future installations. Thanks.

> ----------------------------------------
> From: Mario Marietto <marietto2008@gmail.com>
> Sent: Mon Nov 29 22:46:45 CET 2021
> To: Sysadmin Lists <sysadmin.lists@mailfence.com>
> Cc: Corvin Köhne <C.Koehne@beckhoff.com>, Freebsd Virtualization <freebsd-virtualization@freebsd.org>
> Subject: Re: Bhyve CD-ROM
>
>
> So,the time to try my ideas has come. You can try to remove the first
> sector of the iso image,so that it won't boot or you can pass through a
> virtual or a physical disk or you can create a new iso file from scratch,
> with your files inside...there are a lot of possibilities...

--
Sent with https://nospamproxywebp.beckhoff.com/enqsig/link?id=BCAAAABGd7m3lfMOLOIhx3uNR_1Qav4Ffx8-jQB0torD82ts_G0AAABy4TpMfBQVqPSK8iGYCKtMy5hsSLbur61klQj9IgLRJpG8zJ5li7V53rFiFZU72SZTTLtX7AlnxLv9-XcUlnIlTPG2gdCYoGOxT_v48UL6ukvhsMS0pAR7aOWi46x-0YlYrIERnqGu0kcs-lpC0
Secure and private email