[Bug 270805] loader.efi: crashes with USB device attached
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Sat, 22 Apr 2023 10:23:59 UTC
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=270805 --- Comment #11 from Robert Clausecker <fuz@FreeBSD.org> --- (In reply to Robert Clausecker from comment #10) Previous testing, as in, before I finally set up the machine. After setting it up, I tried attaching a variety of other USB disks that may have all supported a later protocol level. However, in one of my previous attempts (http://fuz.su/~fuz/files/volterra-dmesg-7.log), you can clearly see that the boot disk is attached via the integrated USB 3.2 hub (however, it was a USB A port): ugen0.4: <GenesysLogic USB3.2 Hub> at usbus0 uhub2 on uhub0 uhub2: <GenesysLogic USB3.2 Hub, class 9/0, rev 3.20/61.24, addr 3> on usbus0 uhub2: 4 ports with 3 removable, self powered (...) ugen0.6: <ASMedia AS2115> at usbus0 umass0 on uhub2 umass0: <ASMedia AS2115, class 0/0, rev 3.00/0.01, addr 5> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:1:0: Attached to scbus1 da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 da0: <ASMT 2115 0> Fixed Direct Access SPC-4 SCSI device da0: Serial Number 00000000000000000000 da0: 400.000MB/s transfers da0: 152627MB (312581808 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> da0: Delete methods: <NONE(*),ZERO> GEOM: new disk da0 The 1969 date is because FreeBSD does not detect an RTC clock. I'm not sure if the machine has one; there's no battery inside, so how would it keep the date? See dmesg log: Warning: no time-of-day clock registered, system time will not be set accurately -- You are receiving this mail because: You are on the CC list for the bug.