[Bug 269181] sysutils/u-boot-rpi-arm64: RPi4/8G fails to boot: "** Reading file would overwrite reserved memory **"
Date: Sun, 05 Feb 2023 01:56:51 UTC
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=269181 Mark Millard <marklmi26-fbsd@yahoo.com> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |marklmi26-fbsd@yahoo.com --- Comment #1 from Mark Millard <marklmi26-fbsd@yahoo.com> --- Just a possibility for possible further investigation . . . I did some experimenting and discovered that u-boot.bin and bootaa64.efi are being loaded to the same starting location. Probably U-Boot had been relocated before that point --and might be known relocate far enough way to not be a problem? I'll note that u-boot.bin is smaller than bootaa64.efi (at least for the ones I looked at). (RPi* firmware debug output to start with . . .) MESS:00:00:07.664888:0: Loaded 'u-boot.bin.2023.01.arm64' to 0x80000 size 0x93208 MESS:00:00:07.672108:0: Device tree loaded to 0x4000 (size 0xd3b9) (NOTE above [vs. later]: 0x80000 for where u-boot.bin was loaded.) . . . U-Boot> printenv . . . boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi . . . kernel_addr_r=0x00080000 . . . U-Boot> env run usb_boot . . . Found EFI removable media binary efi/boot/bootaa64.efi ** Reading file would overwrite reserved memory ** Failed to load 'efi/boot/bootaa64.efi' No UEFI binary known at 0x00080000 EFI LOAD FAILED: continuing... (NOTE vs. earlier: 0x80000 for where u-boot.bin was loaded and for where efi/boot/bootaa64.efi was to be loaded.) . . . U-Boot> echo load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi load usb :1 0x00080000 efi/boot/bootaa64.efi . . . U-Boot> load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi ** Reading file would overwrite reserved memory ** Failed to load 'efi/boot/bootaa64.efi' NOTE: I see the same double load (u-boot.bin and bootaa64.efi) to 0x00080000 for the prior 2020.10 of U-Boot. (May be it just does not check for such and it happened to work but was not guaranteed to? May be it is supposed to be okay? Unsure.) -- You are receiving this mail because: You are the assignee for the bug.