Re: APU1 bricked on stable/14 - solved

In reply to: fuxjez : "Re: APU1 bricked on stable/14 - solved"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: Warner Losh <imp_at_bsdimp.com>
Date: Sun, 13 Oct 2024 22:56:50 UTC
Thanks for this dmesg. It's now clear what to grep for in upgrading. I've
just pushed an updating entry that will hopefully suffice. Please let me
know if there's issues with it, or if you have suggested improvements.

Warner

On Mon, Oct 7, 2024 at 5:57 AM fuxjez <mail@osfux.nl> wrote:

> Hi,
>
> I've included the dmesg from my apu1d device below.
>
> Regards,
>
> ruben
>
> On 10/6/24 16:11, Warner Losh wrote:
> > Great. Just need the APU1 now.
> >
> > Warner
> >
> > On Sun, Oct 6, 2024, 7:56 AM Karl Denninger <karl@denninger.net
> > <mailto:karl@denninger.net>> wrote:
> >
>
> ---<<BOOT>>---
> Copyright (c) 1992-2023 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 14.1-RELEASE-p5 GENERIC amd64
> FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git
> llvmorg-18.1.5-0-g617a15a9eac9)
> VT(vga): resolution 640x480
> CPU: AMD G-T40E Processor (1000.04-MHz K8-class CPU)
>    Origin="AuthenticAMD"  Id=0x500f20  Family=0x14  Model=0x2  Stepping=0
>
>
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>    Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
>    AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
>    AMD
>
> Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
>    SVM: NP,NRIP,NAsids=8
>    TSC: P-state invariant, performance statistics
> real memory  = 4815060992 (4592 MB)
> avail memory = 4083978240 (3894 MB)
> Event timer "LAPIC" quality 100
> ACPI APIC Table: <CORE   COREBOOT>
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> FreeBSD/SMP: 1 package(s) x 2 core(s)
> random: unblocking device.
> ioapic0 <Version 2.1> irqs 0-23
> Launching APs: 1
> random: entropy device external interface
> kbd0 at kbdmux0
> vtvga0: <VT VGA driver>
> smbios0: <System Management BIOS> at iomem 0xf2570-0xf258e
> smbios0: Version: 2.7
> aesni0: No AES or SHA support.
> acpi0: <CORE COREBOOT>
> acpi0: Power Button (fixed)
> cpu0: <ACPI CPU> on acpi0
> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
> atrtc0: registered as a time-of-day clock, resolution 1.000000s
> Event timer "RTC" frequency 32768 Hz quality 0
> attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> apei0: <ACPI Platform Error Interface> on acpi0
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 550
> Event timer "HPET1" frequency 14318180 Hz quality 450
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port
> 0x1000-0x10ff mem 0xf7900000-0xf7900fff,0xf7800000-0xf7803fff irq 16 at
> device 0.0 on pci1
> re0: Using 1 MSI-X message
> re0: ASPM disabled
> re0: Chip rev. 0x2c000000
> re0: MAC rev. 0x00200000
> miibus0: <MII bus> on re0
> rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
> rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
> 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
> 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
> 1000baseT-FDX-flow-master, auto, auto-flow
> re0: Using defaults for TSO: 65518/35/2048
> re0: Ethernet address: 00:0d:b9:36:87:60
> re0: netmap queues/slots: TX 1/256, RX 1/256
> pcib2: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port
> 0x2000-0x20ff mem 0xf7b00000-0xf7b00fff,0xf7a00000-0xf7a03fff irq 17 at
> device 0.0 on pci2
> re1: Using 1 MSI-X message
> re1: ASPM disabled
> re1: Chip rev. 0x2c000000
> re1: MAC rev. 0x00200000
> miibus1: <MII bus> on re1
> rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
> rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
> 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
> 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
> 1000baseT-FDX-flow-master, auto, auto-flow
> re1: Using defaults for TSO: 65518/35/2048
> re1: Ethernet address: 00:0d:b9:36:87:61
> re1: netmap queues/slots: TX 1/256, RX 1/256
> pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port
> 0x3000-0x30ff mem 0xf7d00000-0xf7d00fff,0xf7c00000-0xf7c03fff irq 18 at
> device 0.0 on pci3
> re2: Using 1 MSI-X message
> re2: ASPM disabled
> re2: Chip rev. 0x2c000000
> re2: MAC rev. 0x00200000
> miibus2: <MII bus> on re2
> rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2
> rgephy2:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
> 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
> 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
> 1000baseT-FDX-flow-master, auto, auto-flow
> re2: Using defaults for TSO: 65518/35/2048
> re2: Ethernet address: 00:0d:b9:36:87:62
> re2: netmap queues/slots: TX 1/256, RX 1/256
> ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port
> 0x4010-0x4017,0x4020-0x4023,0x4018-0x401f,0x4024-0x4027,0x4000-0x400f
> mem 0xf7f04000-0xf7f043ff irq 19 at device 17.0 on pci0
> ahci0: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
> ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
> ahcich0: <AHCI channel> at channel 0 on ahci0
> ahcich1: <AHCI channel> at channel 1 on ahci0
> ahcich2: <AHCI channel> at channel 2 on ahci0
> ahcich3: <AHCI channel> at channel 3 on ahci0
> ahcich4: <AHCI channel> at channel 4 on ahci0
> ahcich5: <AHCI channel> at channel 5 on ahci0
> ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f00000-0xf7f00fff
> irq 18 at device 18.0 on pci0
> usbus0 on ohci0
> usbus0: 12Mbps Full Speed USB v1.0
> ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem
> 0xf7f04400-0xf7f044ff irq 17 at device 18.2 on pci0
> usbus1: EHCI version 1.0
> usbus1 on ehci0
> usbus1: 480Mbps High Speed USB v2.0
> ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f01000-0xf7f01fff
> irq 18 at device 19.0 on pci0
> usbus2 on ohci1
> usbus2: 12Mbps Full Speed USB v1.0
> ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem
> 0xf7f04500-0xf7f045ff irq 17 at device 19.2 on pci0
> usbus3: EHCI version 1.0
> usbus3 on ehci1
> usbus3: 480Mbps High Speed USB v2.0
> isab0: <PCI-ISA bridge> at device 20.3 on pci0
> isa0: <ISA bus> on isab0
> pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
> pci4: <ACPI PCI bus> on pcib4
> ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f02000-0xf7f02fff
> irq 18 at device 20.5 on pci0
> usbus4 on ohci2
> usbus4: 12Mbps Full Speed USB v1.0
> pcib5: <ACPI PCI-PCI bridge> at device 21.0 on pci0
> pci5: <ACPI PCI bus> on pcib5
> ath0: <Atheros 9280> at device 0.0 on pci5
> [ath] enabling AN_TOP2_FIXUP
> ath0: [HT] enabling HT modes
> ath0: [HT] 1 stream STBC receive enabled
> ath0: [HT] 1 stream STBC transmit enabled
> ath0: [HT] 2 RX streams; 2 TX streams
> ath0: AR9280 mac 128.2 RF5133 phy 13.0
> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
> ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xf7f03000-0xf7f03fff
> at device 22.0 on pci0
> usbus5 on ohci3
> usbus5: 12Mbps Full Speed USB v1.0
> ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem
> 0xf7f04600-0xf7f046ff at device 22.2 on pci0
> usbus6: EHCI version 1.0
> usbus6 on ehci2
> usbus6: 480Mbps High Speed USB v2.0
> amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
> acpi_button0: <Power Button> on acpi0
> orm0: <ISA Option ROM> at iomem 0xee800-0xeffff pnpid ORM0000 on isa0
> uart0: <16550 or compatible> at port 0x3f8 irq 4 flags 0x10 on isa0
> ns8250: UART FCR is broken
> uart0: console (115200,n,8,1)
> uart0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15.
> uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
> uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 15.
> Timecounter "TSC" frequency 999999881 Hz quality 800
> Timecounters tick every 1.000 msec
> ugen3.1: <ATI EHCI root HUB> at usbus3
> ugen6.1: <ATI EHCI root HUB> at usbus6
> uhub0 on usbus3
> uhub1 on usbus6
> uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
> uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
> ugen1.1: <ATI EHCI root HUB> at usbus1
> ugen5.1: <ATI OHCI root HUB> at usbus5
> uhub2 on usbus1
> uhub3 on usbus5
> uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
> uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
> ugen2.1: <ATI OHCI root HUB> at usbus2
> ugen4.1: <ATI OHCI root HUB> at usbus4
> uhub4 on usbus2
> uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
> uhub5 on usbus4
> uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
> ugen0.1: <ATI OHCI root HUB> at usbus0
> uhub6 on usbus0
> uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> Trying to mount root from ufs:/dev/da0s1a [rw]...
> uhub5: 2 ports with 2 removable, self powered
> uhub3: 4 ports with 4 removable, self powered
> uhub4: 5 ports with 5 removable, self powered
> uhub6: 5 ports with 5 removable, self powered
> Root mount waiting for: usbus1 usbus3 usbus6
> uhub1: 4 ports with 4 removable, self powered
> uhub0: 5 ports with 5 removable, self powered
> uhub2: 5 ports with 5 removable, self powered
> ugen6.2: <Generic Flash Card Reader/Writer> at usbus6
> umass0 on uhub1
> umass0: <Generic Flash Card Reader/Writer, class 0/0, rev 2.01/1.00,
> addr 2> on usbus6
> umass0:  SCSI over Bulk-Only; quirks = 0x4001
> umass0:6:0: Attached to scbus6
> Root mount waiting for: CAM
> mountroot: waiting for device /dev/da0s1a...
> da0 at umass-sim0 bus 0 scbus6 target 0 lun 0
> da0: <Multiple Card  Reader 1.00> Removable Direct Access SPC-2 SCSI device
> da0: Serial Number 058F63666485
> da0: 40.000MB/s transfers
> da0: 29984MB (61407232 512 byte sectors)
> da0: quirks=0x2<NO_6_BYTE>
> intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0
> smbus0: <System Management Bus> on intsmb0
> CPU: AMD G-T40E Processor (1000.00-MHz K8-class CPU)
>    Origin="AuthenticAMD"  Id=0x500f20  Family=0x14  Model=0x2  Stepping=0
>
>
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>    Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
>    AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
>    AMD
>
> Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
>    SVM: NP,NRIP,NAsids=8
>    TSC: P-state invariant, performance statistics
> re0: link state changed to UP
>