Re: net/mpd5 on stable/14 - COMPAT_FREEBSD12 required?
- Reply: Eugene Grosbein : "Re: net/mpd5 on stable/14 - COMPAT_FREEBSD12 required?"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Fri, 01 Sep 2023 06:21:36 UTC
On Thu, 31 Aug 2023 18:39:13 +0200, "Herbert J. Skuhra" wrote: > > On Wed, 30 Aug 2023 15:46:46 +0200, "Herbert J. Skuhra" wrote: > > > > On Wed, 30 Aug 2023 15:29:28 +0200, "Herbert J. Skuhra" wrote: > > > > > > Hi, > > > > > > after updating from stable/13 to (main and later to) stable/14 > > > net/mpd5 only connects to my ISP (VDSL with VLAN) if I enable "options > > > COMPAT_FREEBSD12" in my kernel. Without I get only: > > > > > > Aug 30 15:08:06 gw mpd[59876]: [L1] PPPoE connection timeout after 9 seconds > > > Aug 30 15:08:06 gw mpd[59876]: [L1] Link: DOWN event > > > Aug 30 15:08:06 gw mpd[59876]: [L1] LCP: Down event > > > Aug 30 15:08:06 gw mpd[59876]: [L1] Link: reconnection attempt 1 in 7 seconds > > > Aug 30 15:08:14 gw mpd[59876]: [L1] Link: reconnection attempt 1 > > > Aug 30 15:08:14 gw mpd[59876]: [L1] PPPoE: Connecting to '' > > > Aug 30 15:08:23 gw mpd[59876]: [L1] PPPoE connection timeout after 9 seconds > > > Aug 30 15:08:23 gw mpd[59876]: [L1] Link: DOWN event > > > Aug 30 15:08:23 gw mpd[59876]: [L1] LCP: Down event > > > [..] > > > > > > I guess the problem is: > > > > > > Without "COMPAT_FREEBSD12" vlanproto = 0x0000. If I run "ifconfig > > > vlan31 vlanproto 802.1q" mpd5 works. > > > > Maybe this commit is related: > > > > commit afbb64f1d85b7d8c2938031c3567946b5d10da4f > > Author: Alexander V. Chernikov > > Date: Sun Apr 11 17:47:03 2021 +0100 > > > > Fix vlan creation for the older ifconfig(8) binaries. > > > > Reported by: allanjude > > MFC after: immediately > > > > ? > > On stable/13 (GENERIC without COMPAT_FREEBSD12): > > # ifconfig vlan99 create > ==> vlanproto: 0x0000 > # ifconfig vlan99 vlan 99 vlandev igb0 > ==> vlanproto: 802.1q > # ifconfig vlan99 destroy > # ifconfig vlan99 create vlan 99 vlandev igb0 > ==> vlanproto: 802.1q > > On stable/14 or main (GENERIC without COMPAT_FREEBSD12): > > # ifconfig vlan99 create > ==> vlanproto 0x0000 > # ifconfig vlan99 vlan 99 vlandev igb0 > ==> vlanproto 0x0000# > # ifconfig vlan99 create vlan 99 vlandev igb0 > ==> vlanproto: 802.1q > > I guess that's why the following lines in my /etc/rc.conf no longer > work on stable/14 or main (without COMPAT_FREEBSD12): > > cloned_interfaces="vlan99" > ifconfig_vlan99="vlan 99 vlandev igb0" > > I have to replace the ifconfig line with: > > ifconfig_vlan99="vlan 99 vlandev igb0 vlanproto 802.1q" > > It also works if I remove the following lines in sys/net/if_vlan.c: > > 1110 #ifdef COMPAT_FREEBSD12 > 1113 #endif > > 2265 #ifdef COMPAT_FREEBSD12 > 2268 #endif Bug or user error? -- Herbert