-stable from today dumps core with drm-510-kmod and some graphical clients
Date: Sat, 25 Mar 2023 15:07:13 UTC
Starting sddm works fine, starting my normal session crashes or
freezes FreeBSD.
I can find no error messages after a reboot.
I found out, that I can start xterm or emacs (exwm) without
problems, xrandr works with external screen, but once I start
anything more demanding (I guess demanding of the GPU) everything
freezes or FreeBSD even reboots.
“Demanding” means even simple things like qterminal. I tried
firefox and blender and then I had it with the reboots and didn’t
try anything else. xedit works fine :)
I have nothing in the logs, I have no idea where to look or how to
debug this.
Any ideas, tipps, help greatly apreciated.
Thanks,
Mathias
I’ve commented out everything but twm in my .xinit, the rest of my
configuration follows:
###########################
xrandr output
mathiasp:~% xrandr
Screen 0: minimum 8 x 8, current 5120 x 1440, maximum 32767 x
32767
eDP-1 connected primary 2560x1440+0+0 (normal left inverted right
x axis y axis) 310mm x 170mm
2560x1440 60.01*+ 59.95
1920x1440 60.00
1856x1392 60.01
1792x1344 60.01
2048x1152 60.00 59.90 59.91
1920x1200 59.88 59.95
1920x1080 59.96 60.00 59.93
1600x1200 60.00
1680x1050 59.95 59.88
1400x1050 59.98
1600x900 60.00 59.95 59.82
1280x1024 60.02
1400x900 59.96 59.88
1280x960 60.00
1368x768 60.00 59.88 59.85
1280x800 59.81 59.91
1280x720 59.86 60.00 59.74
1024x768 60.00
1024x576 60.00 59.90 59.82
960x540 60.00 59.63 59.82
800x600 60.32 56.25
864x486 60.00 59.92 59.57
640x480 59.94
720x405 59.51 60.00 58.99
640x360 59.84 59.32 60.00
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
HDMI-1 connected 2560x1440+2560+0 (normal left inverted right x
axis y axis) 600mm x 340mm
3840x2160 30.00 + 25.00 24.00 29.97 23.98
2560x1440 59.95*
1920x1080 60.00 59.94 30.00 29.97
1600x900 60.00
1280x1024 60.02
1280x800 59.91
1280x720 60.00 59.94
1024x768 60.00
800x600 60.32
720x480 60.00 59.94
640x480 60.00 59.94
HDMI-2 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
################################################
/usr/local/etc/X11/xorg.conf.d/20-intel.conf
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "sna"
Option "TearFree" "true"
Option "DRI" "3"
EndSection
#################################################
i915 parts in /boot/loader.conf (tested with and without, same
behaviour)
compat.linuxkpi.i915_enable_dc=1
compat.linuxkpi.i915_disable_power_well=0
###########################################
Xorg.0.log
[ 38.905] (--) Log file renamed from
"/var/log/Xorg.pid-82050.log" to "/var/log/Xorg.0.log"
[ 38.907]
X.Org X Server 1.21.1.4
X Protocol Version 11, Revision 0
[ 38.907] Current Operating System: FreeBSD danton 13.2-STABLE
FreeBSD 13.2-STABLE stable/13-n254907-3c7ef29e8998 GENERIC amd64
[ 38.907]
[ 38.907] Current version of pixman: 0.42.2
[ 38.907] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 38.907] Markers: (--) probed, (**) from config file, (==)
default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??)
unknown.
[ 38.907] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar
25 15:24:18 2023
[ 38.910] (==) Using config directory:
"/usr/local/etc/X11/xorg.conf.d"
[ 38.910] (==) Using system config directory
"/usr/local/share/X11/xorg.conf.d"
[ 38.911] (==) No Layout section. Using the first Screen
section.
[ 38.911] (==) No screen section available. Using defaults.
[ 38.911] (**) |-->Screen "Default Screen Section" (0)
[ 38.911] (**) | |-->Monitor "<default monitor>"
[ 38.911] (==) No device specified for screen "Default Screen
Section".
Using the first device section listed.
[ 38.911] (**) | |-->Device "Intel Graphics"
[ 38.911] (==) No monitor specified for screen "Default Screen
Section".
Using a default monitor configuration.
[ 38.911] (**) Option "AutoAddDevices" "true"
[ 38.911] (**) Option "AutoEnableDevices" "true"
[ 38.911] (**) Automatically adding devices
[ 38.911] (**) Automatically enabling devices
[ 38.911] (==) Not automatically adding GPU devices
[ 38.911] (==) Automatically binding GPU devices
[ 38.911] (==) Max clients allowed: 256, resource mask:
0x1fffff
[ 38.913] (==) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/,
catalogue:/usr/local/etc/X11/fontpath.d
[ 38.913] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[ 38.913] (II) The server relies on udev to provide the list of
input devices.
If no devices become available, reconfigure udev or
disable AutoAddDevices.
[ 38.914] (II) Module ABI versions:
[ 38.914] X.Org ANSI C Emulation: 0.4
[ 38.914] X.Org Video Driver: 25.2
[ 38.914] X.Org XInput driver : 24.4
[ 38.914] X.Org Server Extension : 10.0
[ 38.914] (--) PCI:*(0@0:2:0) 8086:5917:17aa:2259 rev 7, Mem @
0x2ffe000000/16777216, 0xc0000000/536870912, I/O @ 0x0000e000/64,
BIOS @ 0x????????/65536
[ 38.914] (II) LoadModule: "glx"
[ 38.914] (II) Loading
/usr/local/lib/xorg/modules/extensions/libglx.so
[ 38.921] (II) Module glx: vendor="X.Org Foundation"
[ 38.921] compiled for 1.21.1.4, module version = 1.0.0
[ 38.921] ABI class: X.Org Server Extension, version 10.0
[ 38.921] (II) LoadModule: "intel"
[ 38.922] (II) Loading
/usr/local/lib/xorg/modules/drivers/intel_drv.so
[ 38.925] (II) Module intel: vendor="X.Org Foundation"
[ 38.925] compiled for 1.21.1.4, module version = 2.99.917
[ 38.925] Module class: X.Org Video Driver
[ 38.925] ABI class: X.Org Video Driver, version 25.2
[ 38.925] (II) intel: Driver for Intel(R) Integrated Graphics
Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854,
852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview
GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE,
G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 38.925] (II) intel: Driver for Intel(R) HD Graphics
[ 38.925] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 38.925] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 38.925] (--) Using syscons driver with X support (version
2.0)
[ 38.925] (++) using VT number 9
[ 38.944] (II) intel(0): Using Kernel Mode Setting driver:
i915, version 1.6.0 20200917
[ 38.945] (II) intel(0): SNA compiled:
2.99.917-923-gb74b67f0f321
[ 38.946] (WW) VGA arbiter: cannot open kernel arbiter, no
multi-card support
[ 38.949] (--) intel(0): gen9 engineering sample
[ 38.949] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3,
sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[ 38.949] (II) intel(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 38.949] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 38.949] (==) intel(0): RGB weight 888
[ 38.949] (==) intel(0): Default visual is TrueColor
[ 38.949] (**) intel(0): Option "AccelMethod" "sna"
[ 38.949] (**) intel(0): Option "DRI" "3"
[ 38.949] (**) intel(0): Option "TearFree" "true"
[ 38.952] (II) intel(0): Output eDP-1 has no monitor section
[ 38.952] (II) intel(0): Enabled output eDP-1
[ 38.952] (II) intel(0): Output DP-1 has no monitor section
[ 38.952] (II) intel(0): Enabled output DP-1
[ 38.952] (II) intel(0): Output HDMI-1 has no monitor section
[ 38.952] (II) intel(0): Enabled output HDMI-1
[ 38.952] (II) intel(0): Output DP-2 has no monitor section
[ 38.952] (II) intel(0): Enabled output DP-2
[ 38.952] (II) intel(0): Output HDMI-2 has no monitor section
[ 38.952] (II) intel(0): Enabled output HDMI-2
[ 38.952] (--) intel(0): Using a maximum size of 256x256 for
hardware cursors
[ 38.952] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 38.952] (II) intel(0): Enabled output VIRTUAL1
[ 38.952] (--) intel(0): Output eDP-1 using initial mode
2560x1440 on pipe 0
[ 38.952] (--) intel(0): Output HDMI-1 using initial mode
2560x1440 on pipe 1
[ 38.952] (**) intel(0): TearFree enabled
[ 38.952] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 38.952] (==) intel(0): DPI set to (96, 96)
[ 38.952] (II) Loading sub module "dri3"
[ 38.952] (II) LoadModule: "dri3"
[ 38.952] (II) Module "dri3" already built-in
[ 38.952] (II) Loading sub module "dri2"
[ 38.952] (II) LoadModule: "dri2"
[ 38.952] (II) Module "dri2" already built-in
[ 38.952] (II) Loading sub module "present"
[ 38.952] (II) LoadModule: "present"
[ 38.952] (II) Module "present" already built-in
[ 38.958] (II) intel(0): SNA initialized with Kabylake (gen9)
backend
[ 38.958] (==) intel(0): Backing store enabled
[ 38.958] (==) intel(0): Silken mouse enabled
[ 38.958] (II) intel(0): HW Cursor enabled
[ 38.959] (==) intel(0): DPMS enabled
[ 38.959] (==) intel(0): Display hotplug detection enabled
[ 38.959] (II) intel(0): [DRI2] Setup complete
[ 38.959] (II) intel(0): [DRI2] DRI driver: iris
[ 38.959] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 38.959] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 38.959] (II) intel(0): hardware support for Present enabled
[ 38.959] (II) Initializing extension Generic Event Extension
[ 38.960] (II) Initializing extension SHAPE
[ 38.960] (II) Initializing extension MIT-SHM
[ 38.960] (II) Initializing extension XInputExtension
[ 38.960] (II) Initializing extension XTEST
[ 38.960] (II) Initializing extension BIG-REQUESTS
[ 38.961] (II) Initializing extension SYNC
[ 38.961] (II) Initializing extension XKEYBOARD
[ 38.961] (II) Initializing extension XC-MISC
[ 38.962] (II) Initializing extension SECURITY
[ 38.962] (II) Initializing extension XFIXES
[ 38.962] (II) Initializing extension RENDER
[ 38.962] (II) Initializing extension RANDR
[ 38.962] (II) Initializing extension COMPOSITE
[ 38.963] (II) Initializing extension DAMAGE
[ 38.963] (II) Initializing extension MIT-SCREEN-SAVER
[ 38.963] (II) Initializing extension DOUBLE-BUFFER
[ 38.963] (II) Initializing extension RECORD
[ 38.963] (II) Initializing extension DPMS
[ 38.963] (II) Initializing extension Present
[ 38.963] (II) Initializing extension DRI3
[ 38.964] (II) Initializing extension X-Resource
[ 38.964] (II) Initializing extension XVideo
[ 38.964] (II) Initializing extension XVideo-MotionCompensation
[ 38.964] (II) Initializing extension GLX
[ 39.179] (II) AIGLX: Loaded and initialized iris
[ 39.179] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 39.179] (II) Initializing extension XFree86-VidModeExtension
[ 39.180] (II) Initializing extension XFree86-DGA
[ 39.180] (II) Initializing extension XFree86-DRI
[ 39.180] (II) Initializing extension DRI2
[ 39.183] (II) intel(0): switch to mode 2560x1440@60.0 on eDP-1
using pipe 0, position (0, 0), rotation normal, reflection none
[ 39.191] (II) intel(0): switch to mode 2560x1440@60.0 on
HDMI-1 using pipe 1, position (0, 0), rotation normal, reflection
none
[ 39.195] (II) intel(0): Setting screen physical size to 677 x
381
[ 39.259] (II) config/udev: Adding input device System mouse
(/dev/input/event0)
[ 39.259] (**) System mouse: Applying InputClass "evdev pointer
catchall"
[ 39.259] (**) System mouse: Applying InputClass "libinput
pointer catchall"
[ 39.259] (II) LoadModule: "libinput"
[ 39.259] (II) Loading
/usr/local/lib/xorg/modules/input/libinput_drv.so
[ 39.263] (II) Module libinput: vendor="X.Org Foundation"
[ 39.263] compiled for 1.21.1.4, module version = 1.2.0
[ 39.263] Module class: X.Org XInput Driver
[ 39.263] ABI class: X.Org XInput driver, version 24.4
[ 39.263] (II) Using input driver 'libinput' for 'System mouse'
[ 39.263] (**) System mouse: always reports core events
[ 39.263] (**) Option "Device" "/dev/input/event0"
[ 39.264] (**) Option "_source" "server/udev"
[ 39.270] (II) event0 - System mouse: is tagged by udev as:
Mouse
[ 39.270] (II) event0 - System mouse: device is a pointer
[ 39.271] (II) event0 - System mouse: device removed
[ 39.271] (**) Option "config_info" "udev:/dev/input/event0"
[ 39.271] (II) XINPUT: Adding extended input device "System
mouse" (type: MOUSE, id 6)
[ 39.271] (**) Option "AccelerationScheme" "none"
[ 39.271] (**) System mouse: (accel) selected scheme none/0
[ 39.271] (**) System mouse: (accel) acceleration factor: 2.000
[ 39.271] (**) System mouse: (accel) acceleration threshold: 4
[ 39.272] (II) event0 - System mouse: is tagged by udev as:
Mouse
[ 39.273] (II) event0 - System mouse: device is a pointer
[ 39.273] (II) config/udev: Adding input device System keyboard
multiplexer (/dev/input/event1)
[ 39.273] (**) System keyboard multiplexer: Applying InputClass
"evdev keyboard catchall"
[ 39.273] (**) System keyboard multiplexer: Applying InputClass
"Evdev keyboard"
[ 39.273] (**) System keyboard multiplexer: Applying InputClass
"libinput keyboard catchall"
[ 39.273] (**) System keyboard multiplexer: Applying InputClass
"keyboard"
[ 39.273] (II) Using input driver 'libinput' for 'System
keyboard multiplexer'
[ 39.273] (**) System keyboard multiplexer: always reports core
events
[ 39.273] (**) Option "Device" "/dev/input/event1"
[ 39.273] (**) Option "_source" "server/udev"
[ 39.274] (II) event1 - System keyboard multiplexer: is tagged
by udev as: Keyboard
[ 39.275] (II) event1 - System keyboard multiplexer: device is
a keyboard
[ 39.276] (II) event1 - System keyboard multiplexer: device
removed
[ 39.276] (**) Option "config_info" "udev:/dev/input/event1"
[ 39.276] (II) XINPUT: Adding extended input device "System
keyboard multiplexer" (type: KEYBOARD, id 7)
[ 39.276] (**) Option "xkb_rules" "evdev"
[ 39.276] (**) Option "xkb_layout" "de,us,fr"
[ 39.276] (WW) Option "xkb_variant" requires a string value
[ 39.303] (II) event1 - System keyboard multiplexer: is tagged
by udev as: Keyboard
[ 39.303] (II) event1 - System keyboard multiplexer: device is
a keyboard
[ 39.304] (II) config/udev: Adding input device La-VIEW
Technology SteelSeries (/dev/input/event10)
[ 39.304] (**) La-VIEW Technology SteelSeries: Applying
InputClass "evdev keyboard catchall"
[ 39.304] (**) La-VIEW Technology SteelSeries: Applying
InputClass "Evdev keyboard"
[ 39.304] (**) La-VIEW Technology SteelSeries: Applying
InputClass "libinput keyboard catchall"
[ 39.304] (**) La-VIEW Technology SteelSeries: Applying
InputClass "keyboard"
[ 39.304] (II) Using input driver 'libinput' for 'La-VIEW
Technology SteelSeries'
[ 39.304] (**) La-VIEW Technology SteelSeries: always reports
core events
[ 39.304] (**) Option "Device" "/dev/input/event10"
[ 39.304] (**) Option "_source" "server/udev"
[ 39.305] (II) event10 - La-VIEW Technology SteelSeries, class
0/0, rev 2.00/0.00, addr 8: is tagged by udev as: Keyboard
[ 39.306] (II) event10 - La-VIEW Technology SteelSeries, class
0/0, rev 2.00/0.00, addr 8: device is a keyboard
[ 39.306] (II) event10 - La-VIEW Technology SteelSeries, class
0/0, rev 2.00/0.00, addr 8: device removed
[ 39.306] (**) Option "config_info" "udev:/dev/input/event10"
[ 39.306] (II) XINPUT: Adding extended input device "La-VIEW
Technology SteelSeries" (type: KEYBOARD, id 8)
[ 39.306] (**) Option "xkb_rules" "evdev"
[ 39.306] (**) Option "xkb_layout" "de,us,fr"
[ 39.306] (WW) Option "xkb_variant" requires a string value
[ 39.307] (II) event10 - La-VIEW Technology SteelSeries, class
0/0, rev 2.00/0.00, addr 8: is tagged by udev as: Keyboard
[ 39.308] (II) event10 - La-VIEW Technology SteelSeries, class
0/0, rev 2.00/0.00, addr 8: device is a keyboard
[ 39.309] (II) config/udev: Adding input device La-VIEW
Technology SteelSeries (/dev/input/event12)
[ 39.309] (**) La-VIEW Technology SteelSeries: Applying
InputClass "evdev pointer catchall"
[ 39.309] (**) La-VIEW Technology SteelSeries: Applying
InputClass "libinput pointer catchall"
[ 39.309] (II) Using input driver 'libinput' for 'La-VIEW
Technology SteelSeries'
[ 39.309] (**) La-VIEW Technology SteelSeries: always reports
core events
[ 39.309] (**) Option "Device" "/dev/input/event12"
[ 39.309] (**) Option "_source" "server/udev"
[ 39.310] (II) event12 - La-VIEW Technology SteelSeries, class
0/0, rev 2.00/0.00, addr 8: is tagged by udev as: Mouse
[ 39.310] (II) event12 - La-VIEW Technology SteelSeries, class
0/0, rev 2.00/0.00, addr 8: device is a pointer
[ 39.311] (II) event12 - La-VIEW Technology SteelSeries, class
0/0, rev 2.00/0.00, addr 8: device removed
[ 39.311] (**) Option "config_info" "udev:/dev/input/event12"
[ 39.311] (II) XINPUT: Adding extended input device "La-VIEW
Technology SteelSeries" (type: MOUSE, id 9)
[ 39.311] (**) Option "AccelerationScheme" "none"
[ 39.311] (**) La-VIEW Technology SteelSeries: (accel) selected
scheme none/0
[ 39.311] (**) La-VIEW Technology SteelSeries: (accel)
acceleration factor: 2.000
[ 39.311] (**) La-VIEW Technology SteelSeries: (accel)
acceleration threshold: 4
[ 39.312] (II) event12 - La-VIEW Technology SteelSeries, class
0/0, rev 2.00/0.00, addr 8: is tagged by udev as: Mouse
[ 39.312] (II) event12 - La-VIEW Technology SteelSeries, class
0/0, rev 2.00/0.00, addr 8: device is a pointer
[ 39.379] (II) config/udev: Adding input device Wacom Intuos PT
S 2 Pen (/dev/input/event13)
[ 39.379] (**) Wacom Intuos PT S 2 Pen: Applying InputClass
"evdev tablet catchall"
[ 39.379] (**) Wacom Intuos PT S 2 Pen: Applying InputClass
"libinput tablet catchall"
[ 39.379] (**) Wacom Intuos PT S 2 Pen: Applying InputClass
"Wacom USB tablet class"
[ 39.379] (**) Wacom Intuos PT S 2 Pen: Applying InputClass
"Wacom tablet class"
[ 39.379] (II) LoadModule: "wacom"
[ 39.379] (II) Loading
/usr/local/lib/xorg/modules/input/wacom_drv.so
[ 39.384] (II) Module wacom: vendor="X.Org Foundation"
[ 39.384] compiled for 1.21.1.4, module version = 0.39.0
[ 39.384] Module class: X.Org XInput Driver
[ 39.384] ABI class: X.Org XInput driver, version 24.4
[ 39.384] (II) Build version: 0.39.0
[ 39.384] (II) wacom: Driver for Wacom graphics tablets:
PenPartner, Graphire,
Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3
6x8,
Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun
6x8,
Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461,
CTL-660,
CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1,
CTH-461/L,
CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos
12x12,
Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550,
PL800,
PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521,
DTU1931,
DTU2231, DTU1631, DTH1152, DTH1152, DTK2451, DTH2452,
DTH2452,
Intuos2 4x5, Intuos2 6x8, Intuos2 9x12, Intuos2 12x12,
Intuos2 12x18,
Intuos2 6x8 , Volito, PenStation, Volito2 4x5, Volito2
2x3,
PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6, Bamboo1 5x8,
Intuos3 4x5,
Intuos3 6x8, Intuos3 9x12, Intuos3 12x12, Intuos3 12x19,
Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9,
Intuos4 8x13,
Intuos4 12x19, Intuos4 WL USB Endpoint,
Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5
touch M,
Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S,
Intuos Pro M,
Intuos Pro L, Intuos Draw small, Intuos Art/Photo/Comic
small,
Intuos Draw medium, Intuos Art medium, Cintiq 21UX, Cintiq
20WSX,
Cintiq 12WX, Cintiq 21UX2, Cintiq 24HD, Cintiq 22HD,
Cintiq 24HD touch (EMR digitizer), Cintiq 13HD, DTK2241,
DTH2242,
Cintiq 22HDT, Cintiq 27QHDT, Cintiq 27QHDT, Mobilestudio
Pro 13,
MobileStudio Pro 16, MobileStudio Pro 13, MobileStudio Pro
16,
Cintiq 13 FHD Pro, Cintiq 16 UHD Pro, Cintiq Pro 24,
Cintiq Pro 32,
Cintiq 13 FHD Pro, Cintiq 16 UHD Pro, Cintiq Pro 24,
Cintiq Pro 32,
Cintiq Pro 24, Mobilestudio Pro 13, MobileStudio Pro 16,
MobileStudio Pro 13, MobileStudio Pro 16, MobileStudio Pro
16,
MobileStudio Pro 16, TabletPC 0x90, TabletPC 0x93,
TabletPC 0x97,
TabletPC 0x9A, CapPlus 0x9F, TabletPC 0xE2, TabletPC
0xE3,
TabletPC 0xE5, TabletPC 0xE6, TabletPC 0xEC, TabletPC
0xED,
TabletPC 0xEF, TabletPC 0x100, TabletPC 0x101, TabletPC
0x10D,
TabletPC 0x116, TabletPC 0x12C, TabletPC 0x4001, TabletPC
0x4004,
TabletPC 0x5000, TabletPC 0x5002, usb:172f:0024,
usb:172f:0025,
usb:172f:0026, usb:172f:0027, usb:172f:0028,
usb:172f:0030,
usb:172f:0031, usb:172f:0032, usb:172f:0033,
usb:172f:0034,
usb:172f:0035, usb:172f:0036, usb:172f:0037,
usb:172f:0038,
usb:172f:0039, usb:172f:0051, usb:172f:0052,
usb:172f:0053,
usb:172f:0054, usb:172f:0055, usb:172f:0056,
usb:172f:0057,
usb:172f:0058, usb:172f:0500, usb:172f:0501,
usb:172f:0502,
usb:172f:0503, usb:1b96:0001, usb:17ef:6004
[ 39.388] (II) Using input driver 'wacom' for 'Wacom Intuos PT
S 2 Pen'
[ 39.388] (**) Wacom Intuos PT S 2 Pen: always reports core
events
[ 39.388] (**) Option "Device" "/dev/input/event13"
[ 39.443] (II) Wacom Intuos PT S 2 Pen: type not specified,
assuming 'stylus'.
[ 39.443] (II) Wacom Intuos PT S 2 Pen: other types will be
automatically added.
[ 39.444] (--) Wacom Intuos PT S 2 Pen stylus: using pressure
threshold of 851 for button 1
[ 39.444] (**) Wacom Intuos PT S 2 Pen stylus: panscroll is 0
[ 39.444] (**) Wacom Intuos PT S 2 Pen stylus: panscroll
modified to 1300
[ 39.444] (--) Wacom Intuos PT S 2 Pen stylus: maxX=15200
maxY=9500 maxZ=2047 resX=100000 resY=100000 tilt=enabled
[ 39.444] (II) Wacom Intuos PT S 2 Pen stylus: hotplugging
dependent devices.
[ 39.444] (EE) Wacom Intuos PT S 2 Pen stylus: Invalid type
'eraser' for this device.
[ 39.444] (EE) Wacom Intuos PT S 2 Pen stylus: Invalid type
'cursor' for this device.
[ 39.444] (EE) Wacom Intuos PT S 2 Pen stylus: Invalid type
'touch' for this device.
[ 39.444] (EE) Wacom Intuos PT S 2 Pen stylus: Invalid type
'pad' for this device.
[ 39.445] (II) Wacom Intuos PT S 2 Pen stylus: hotplugging
completed.
[ 39.456] (**) Option "config_info" "udev:/dev/input/event13"
[ 39.456] (II) XINPUT: Adding extended input device "Wacom
Intuos PT S 2 Pen stylus" (type: STYLUS, id 10)
[ 39.457] (**) Wacom Intuos PT S 2 Pen stylus: (accel) keeping
acceleration scheme 1
[ 39.457] (**) Wacom Intuos PT S 2 Pen stylus: (accel)
acceleration profile 0
[ 39.457] (**) Wacom Intuos PT S 2 Pen stylus: (accel)
acceleration factor: 2.000
[ 39.457] (**) Wacom Intuos PT S 2 Pen stylus: (accel)
acceleration threshold: 4
[ 39.578] (II) config/udev: Adding input device Wacom Intuos PT
S 2 Finger (/dev/input/event14)
[ 39.578] (**) Wacom Intuos PT S 2 Finger: Applying InputClass
"evdev pointer catchall"
[ 39.578] (**) Wacom Intuos PT S 2 Finger: Applying InputClass
"evdev touchpad catchall"
[ 39.578] (**) Wacom Intuos PT S 2 Finger: Applying InputClass
"libinput pointer catchall"
[ 39.578] (**) Wacom Intuos PT S 2 Finger: Applying InputClass
"libinput touchpad catchall"
[ 39.578] (**) Wacom Intuos PT S 2 Finger: Applying InputClass
"touchpad catchall"
[ 39.578] (**) Wacom Intuos PT S 2 Finger: Applying InputClass
"Default clickpad buttons"
[ 39.578] (**) Wacom Intuos PT S 2 Finger: Applying InputClass
"Wacom USB touchpad class"
[ 39.578] (**) Wacom Intuos PT S 2 Finger: Applying InputClass
"Wacom touchpad class"
[ 39.578] (II) Using input driver 'wacom' for 'Wacom Intuos PT
S 2 Finger'
[ 39.578] (**) Wacom Intuos PT S 2 Finger: always reports core
events
[ 39.578] (**) Option "Device" "/dev/input/event14"
[ 39.634] (EE) Wacom Intuos PT S 2 Finger: Invalid type
'stylus' for this device.
[ 39.634] (EE) Wacom Intuos PT S 2 Finger: Invalid type
'eraser' for this device.
[ 39.634] (EE) Wacom Intuos PT S 2 Finger: Invalid type
'cursor' for this device.
[ 39.634] (II) Wacom Intuos PT S 2 Finger: type not specified,
assuming 'touch'.
[ 39.634] (II) Wacom Intuos PT S 2 Finger: other types will be
automatically added.
[ 39.635] (**) Wacom Intuos PT S 2 Finger touch: panscroll is 0
[ 39.635] (**) Wacom Intuos PT S 2 Finger touch: panscroll
modified to 2600
[ 39.635] (--) Wacom Intuos PT S 2 Finger touch: maxX=1520
maxY=950 maxZ=0 resX=10000 resY=10000
[ 39.635] (II) Wacom Intuos PT S 2 Finger touch: hotplugging
dependent devices.
[ 39.635] (EE) Wacom Intuos PT S 2 Finger touch: Invalid type
'stylus' for this device.
[ 39.635] (EE) Wacom Intuos PT S 2 Finger touch: Invalid type
'eraser' for this device.
[ 39.635] (EE) Wacom Intuos PT S 2 Finger touch: Invalid type
'cursor' for this device.
[ 39.635] (EE) Wacom Intuos PT S 2 Finger touch: Invalid type
'pad' for this device.
[ 39.635] (II) Wacom Intuos PT S 2 Finger touch: hotplugging
completed.
[ 39.646] (**) Option "config_info" "udev:/dev/input/event14"
[ 39.646] (II) XINPUT: Adding extended input device "Wacom
Intuos PT S 2 Finger touch" (type: TOUCH, id 11)
[ 39.647] (**) Wacom Intuos PT S 2 Finger touch: (accel)
keeping acceleration scheme 1
[ 39.647] (**) Wacom Intuos PT S 2 Finger touch: (accel)
acceleration profile 0
[ 39.647] (**) Wacom Intuos PT S 2 Finger touch: (accel)
acceleration factor: 2.000
[ 39.647] (**) Wacom Intuos PT S 2 Finger touch: (accel)
acceleration threshold: 4
[ 39.704] (II) config/udev: Adding input device Wacom Intuos PT
S 2 Pad (/dev/input/event15)
[ 39.704] (**) Wacom Intuos PT S 2 Pad: Applying InputClass
"evdev tablet catchall"
[ 39.704] (**) Wacom Intuos PT S 2 Pad: Applying InputClass
"libinput tablet catchall"
[ 39.704] (**) Wacom Intuos PT S 2 Pad: Applying InputClass
"Wacom USB tablet class"
[ 39.704] (**) Wacom Intuos PT S 2 Pad: Applying InputClass
"Wacom tablet class"
[ 39.704] (II) Using input driver 'wacom' for 'Wacom Intuos PT
S 2 Pad'
[ 39.704] (**) Wacom Intuos PT S 2 Pad: always reports core
events
[ 39.704] (**) Option "Device" "/dev/input/event15"
[ 39.705] (EE) Wacom Intuos PT S 2 Pad: Invalid type 'stylus'
for this device.
[ 39.705] (EE) Wacom Intuos PT S 2 Pad: Invalid type 'eraser'
for this device.
[ 39.705] (EE) Wacom Intuos PT S 2 Pad: Invalid type 'cursor'
for this device.
[ 39.705] (EE) Wacom Intuos PT S 2 Pad: Invalid type 'touch'
for this device.
[ 39.705] (II) Wacom Intuos PT S 2 Pad: type not specified,
assuming 'pad'.
[ 39.705] (II) Wacom Intuos PT S 2 Pad: other types will be
automatically added.
[ 39.706] (**) Wacom Intuos PT S 2 Pad pad: panscroll is 0
[ 39.706] (**) Wacom Intuos PT S 2 Pad pad: panscroll modified
to 2600
[ 39.706] (II) Wacom Intuos PT S 2 Pad pad: hotplugging
dependent devices.
[ 39.706] (EE) Wacom Intuos PT S 2 Pad pad: Invalid type
'stylus' for this device.
[ 39.706] (EE) Wacom Intuos PT S 2 Pad pad: Invalid type
'eraser' for this device.
[ 39.706] (EE) Wacom Intuos PT S 2 Pad pad: Invalid type
'cursor' for this device.
[ 39.706] (EE) Wacom Intuos PT S 2 Pad pad: Invalid type
'touch' for this device.
[ 39.706] (II) Wacom Intuos PT S 2 Pad pad: hotplugging
completed.
[ 39.706] (**) Option "config_info" "udev:/dev/input/event15"
[ 39.706] (II) XINPUT: Adding extended input device "Wacom
Intuos PT S 2 Pad pad" (type: PAD, id 12)
[ 39.707] (**) Wacom Intuos PT S 2 Pad pad: (accel) keeping
acceleration scheme 1
[ 39.707] (**) Wacom Intuos PT S 2 Pad pad: (accel)
acceleration profile 0
[ 39.707] (**) Wacom Intuos PT S 2 Pad pad: (accel)
acceleration factor: 2.000
[ 39.707] (**) Wacom Intuos PT S 2 Pad pad: (accel)
acceleration threshold: 4
[ 39.774] (II) config/udev: Adding input device Wacom Pen and
multitouch sensor Finger (/dev/input/event16)
[ 39.774] (**) Wacom Pen and multitouch sensor Finger: Applying
InputClass "evdev touchscreen catchall"
[ 39.774] (**) Wacom Pen and multitouch sensor Finger: Applying
InputClass "libinput touchscreen catchall"
[ 39.774] (**) Wacom Pen and multitouch sensor Finger: Applying
InputClass "Wacom USB touchscreen class"
[ 39.774] (**) Wacom Pen and multitouch sensor Finger: Applying
InputClass "Wacom touchscreen class"
[ 39.774] (II) Using input driver 'wacom' for 'Wacom Pen and
multitouch sensor Finger'
[ 39.774] (**) Wacom Pen and multitouch sensor Finger: always
reports core events
[ 39.774] (**) Option "Device" "/dev/input/event16"
[ 39.830] (EE) Wacom Pen and multitouch sensor Finger: Invalid
type 'stylus' for this device.
[ 39.830] (EE) Wacom Pen and multitouch sensor Finger: Invalid
type 'eraser' for this device.
[ 39.830] (EE) Wacom Pen and multitouch sensor Finger: Invalid
type 'cursor' for this device.
[ 39.830] (II) Wacom Pen and multitouch sensor Finger: type not
specified, assuming 'touch'.
[ 39.830] (II) Wacom Pen and multitouch sensor Finger: other
types will be automatically added.
[ 39.831] (**) Wacom Pen and multitouch sensor Finger touch:
panscroll is 0
[ 39.831] (**) Wacom Pen and multitouch sensor Finger touch:
panscroll modified to 13
[ 39.831] (--) Wacom Pen and multitouch sensor Finger touch:
maxX=12372 maxY=6960 maxZ=0 resX=40000 resY=40000
[ 39.831] (II) Wacom Pen and multitouch sensor Finger touch:
hotplugging dependent devices.
[ 39.831] (EE) Wacom Pen and multitouch sensor Finger touch:
Invalid type 'stylus' for this device.
[ 39.831] (EE) Wacom Pen and multitouch sensor Finger touch:
Invalid type 'eraser' for this device.
[ 39.831] (EE) Wacom Pen and multitouch sensor Finger touch:
Invalid type 'cursor' for this device.
[ 39.831] (EE) Wacom Pen and multitouch sensor Finger touch:
Invalid type 'pad' for this device.
[ 39.831] (II) Wacom Pen and multitouch sensor Finger touch:
hotplugging completed.
[ 39.842] (**) Option "config_info" "udev:/dev/input/event16"
[ 39.842] (II) XINPUT: Adding extended input device "Wacom Pen
and multitouch sensor Finger touch" (type: TOUCH, id 13)
[ 39.843] (**) Wacom Pen and multitouch sensor Finger touch:
(accel) keeping acceleration scheme 1
[ 39.843] (**) Wacom Pen and multitouch sensor Finger touch:
(accel) acceleration profile 0
[ 39.843] (**) Wacom Pen and multitouch sensor Finger touch:
(accel) acceleration factor: 2.000
[ 39.843] (**) Wacom Pen and multitouch sensor Finger touch:
(accel) acceleration threshold: 4
[ 39.964] (II) config/udev: Adding input device Wacom Pen and
multitouch sensor Pen (/dev/input/event17)
[ 39.964] (**) Wacom Pen and multitouch sensor Pen: Applying
InputClass "evdev tablet catchall"
[ 39.964] (**) Wacom Pen and multitouch sensor Pen: Applying
InputClass "libinput tablet catchall"
[ 39.964] (**) Wacom Pen and multitouch sensor Pen: Applying
InputClass "Wacom USB tablet class"
[ 39.964] (**) Wacom Pen and multitouch sensor Pen: Applying
InputClass "Wacom tablet class"
[ 39.964] (II) Using input driver 'wacom' for 'Wacom Pen and
multitouch sensor Pen'
[ 39.964] (**) Wacom Pen and multitouch sensor Pen: always
reports core events
[ 39.964] (**) Option "Device" "/dev/input/event17"
[ 40.019] (II) Wacom Pen and multitouch sensor Pen: type not
specified, assuming 'stylus'.
[ 40.019] (II) Wacom Pen and multitouch sensor Pen: other types
will be automatically added.
[ 40.020] (--) Wacom Pen and multitouch sensor Pen stylus:
using pressure threshold of 851 for button 1
[ 40.020] (**) Wacom Pen and multitouch sensor Pen stylus:
panscroll is 0
[ 40.020] (**) Wacom Pen and multitouch sensor Pen stylus:
panscroll modified to 1300
[ 40.020] (--) Wacom Pen and multitouch sensor Pen stylus:
maxX=30935 maxY=17401 maxZ=4095 resX=100000 resY=100000
tilt=enabled
[ 40.020] (II) Wacom Pen and multitouch sensor Pen stylus:
hotplugging dependent devices.
[ 40.020] (EE) Wacom Pen and multitouch sensor Pen stylus:
Invalid type 'cursor' for this device.
[ 40.020] (EE) Wacom Pen and multitouch sensor Pen stylus:
Invalid type 'touch' for this device.
[ 40.020] (EE) Wacom Pen and multitouch sensor Pen stylus:
Invalid type 'pad' for this device.
[ 40.020] (II) Wacom Pen and multitouch sensor Pen stylus:
hotplugging completed.
[ 40.031] (**) Option "config_info" "udev:/dev/input/event17"
[ 40.031] (II) XINPUT: Adding extended input device "Wacom Pen
and multitouch sensor Pen stylus" (type: STYLUS, id 14)
[ 40.032] (**) Wacom Pen and multitouch sensor Pen stylus:
(accel) keeping acceleration scheme 1
[ 40.032] (**) Wacom Pen and multitouch sensor Pen stylus:
(accel) acceleration profile 0
[ 40.032] (**) Wacom Pen and multitouch sensor Pen stylus:
(accel) acceleration factor: 2.000
[ 40.032] (**) Wacom Pen and multitouch sensor Pen stylus:
(accel) acceleration threshold: 4
[ 40.085] (II) config/udev: Adding input device ACPI video
extension (/dev/input/event2)
[ 40.085] (**) ACPI video extension: Applying InputClass "evdev
keyboard catchall"
[ 40.086] (**) ACPI video extension: Applying InputClass "Evdev
keyboard"
[ 40.086] (**) ACPI video extension: Applying InputClass
"libinput keyboard catchall"
[ 40.086] (**) ACPI video extension: Applying InputClass
"keyboard"
[ 40.086] (II) Using input driver 'libinput' for 'ACPI video
extension'
[ 40.086] (**) ACPI video extension: always reports core events
[ 40.086] (**) Option "Device" "/dev/input/event2"
[ 40.086] (**) Option "_source" "server/udev"
[ 40.090] (II) event2 - ACPI video extension: is tagged by
udev as: Keyboard
[ 40.090] (II) event2 - ACPI video extension: device is a
keyboard
[ 40.091] (II) event2 - ACPI video extension: device removed
[ 40.091] (**) Option "config_info" "udev:/dev/input/event2"
[ 40.091] (II) XINPUT: Adding extended input device "ACPI video
extension" (type: KEYBOARD, id 15)
[ 40.091] (**) Option "xkb_rules" "evdev"
[ 40.091] (**) Option "xkb_layout" "de,us,fr"
[ 40.091] (WW) Option "xkb_variant" requires a string value
[ 40.092] (II) event2 - ACPI video extension: is tagged by
udev as: Keyboard
[ 40.092] (II) event2 - ACPI video extension: device is a
keyboard
[ 40.093] (II) config/udev: Adding input device Sleep Button
(/dev/input/event3)
[ 40.093] (**) Sleep Button: Applying InputClass "evdev
keyboard catchall"
[ 40.093] (**) Sleep Button: Applying InputClass "Evdev
keyboard"
[ 40.093] (**) Sleep Button: Applying InputClass "libinput
keyboard catchall"
[ 40.093] (**) Sleep Button: Applying InputClass "keyboard"
[ 40.093] (II) Using input driver 'libinput' for 'Sleep Button'
[ 40.093] (**) Sleep Button: always reports core events
[ 40.093] (**) Option "Device" "/dev/input/event3"
[ 40.093] (**) Option "_source" "server/udev"
[ 40.094] (II) event3 - Sleep Button: is tagged by udev as:
Keyboard
[ 40.094] (II) event3 - Sleep Button: device is a keyboard
[ 40.095] (II) event3 - Sleep Button: device removed
[ 40.095] (**) Option "config_info" "udev:/dev/input/event3"
[ 40.095] (II) XINPUT: Adding extended input device "Sleep
Button" (type: KEYBOARD, id 16)
[ 40.095] (**) Option "xkb_rules" "evdev"
[ 40.095] (**) Option "xkb_layout" "de,us,fr"
[ 40.095] (WW) Option "xkb_variant" requires a string value
[ 40.096] (II) event3 - Sleep Button: is tagged by udev as:
Keyboard
[ 40.096] (II) event3 - Sleep Button: device is a keyboard
[ 40.096] (II) config/udev: Adding input device Control Method
Lid Switch (/dev/input/event4)
[ 40.097] (II) No input driver specified, ignoring this device.
[ 40.097] (II) This device may have been added with another
device file.
[ 40.097] (II) config/udev: Adding input device AT keyboard
(/dev/input/event5)
[ 40.097] (**) AT keyboard: Applying InputClass "evdev keyboard
catchall"
[ 40.097] (**) AT keyboard: Applying InputClass "Evdev
keyboard"
[ 40.097] (**) AT keyboard: Applying InputClass "libinput
keyboard catchall"
[ 40.097] (**) AT keyboard: Applying InputClass "keyboard"
[ 40.097] (II) Using input driver 'libinput' for 'AT keyboard'
[ 40.097] (**) AT keyboard: always reports core events
[ 40.097] (**) Option "Device" "/dev/input/event5"
[ 40.097] (**) Option "_source" "server/udev"
[ 40.097] (II) event5 - AT keyboard: is tagged by udev as:
Keyboard
[ 40.098] (II) event5 - AT keyboard: device is a keyboard
[ 40.100] (II) event5 - AT keyboard: device removed
[ 40.100] (**) Option "config_info" "udev:/dev/input/event5"
[ 40.100] (II) XINPUT: Adding extended input device "AT
keyboard" (type: KEYBOARD, id 17)
[ 40.100] (**) Option "xkb_rules" "evdev"
[ 40.100] (**) Option "xkb_layout" "de,us,fr"
[ 40.100] (WW) Option "xkb_variant" requires a string value
[ 40.101] (II) event5 - AT keyboard: is tagged by udev as:
Keyboard
[ 40.101] (II) event5 - AT keyboard: device is a keyboard
[ 40.104] (II) config/udev: Adding input device SynPS/2
Synaptics TouchPad (/dev/input/event6)
[ 40.104] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"evdev pointer catchall"
[ 40.104] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"evdev touchpad catchall"
[ 40.104] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"libinput pointer catchall"
[ 40.104] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"libinput touchpad catchall"
[ 40.104] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"touchpad catchall"
[ 40.104] (**) SynPS/2 Synaptics TouchPad: Applying InputClass
"Default clickpad buttons"
[ 40.104] (II) LoadModule: "synaptics"
[ 40.104] (II) Loading
/usr/local/lib/xorg/modules/input/synaptics_drv.so
[ 40.108] (II) Module synaptics: vendor="X.Org Foundation"
[ 40.108] compiled for 1.21.1.4, module version = 1.9.1
[ 40.108] Module class: X.Org XInput Driver
[ 40.108] ABI class: X.Org XInput driver, version 24.4
[ 40.108] (II) Using input driver 'synaptics' for 'SynPS/2
Synaptics TouchPad'
[ 40.108] (**) SynPS/2 Synaptics TouchPad: always reports core
events
[ 40.108] (**) Option "Device" "/dev/input/event6"
[ 40.240] (II) synaptics: SynPS/2 Synaptics TouchPad: found
clickpad property
[ 40.240] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis
range 1264 - 5678 (res 46)
[ 40.241] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis
range 1132 - 4720 (res 60)
[ 40.241] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure
range 0 - 255
[ 40.241] (--) synaptics: SynPS/2 Synaptics TouchPad: finger
width range 0 - 15
[ 40.241] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons:
left double triple
[ 40.241] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor
0x2 Product 0x7
[ 40.241] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 40.241] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad
found
[ 40.241] (**) SynPS/2 Synaptics TouchPad: always reports core
events
[ 40.275] (**) Option "config_info" "udev:/dev/input/event6"
[ 40.275] (II) XINPUT: Adding extended input device "SynPS/2
Synaptics TouchPad" (type: TOUCHPAD, id 18)
[ 40.276] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel)
MinSpeed is now constant deceleration 2.5
[ 40.276] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel)
MaxSpeed is now 1.75
[ 40.276] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel)
AccelFactor is now 0.035
[ 40.276] (**) SynPS/2 Synaptics TouchPad: (accel) keeping
acceleration scheme 1
[ 40.276] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration
profile 1
[ 40.276] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration
factor: 2.000
[ 40.276] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration
threshold: 4
[ 40.324] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad
found
[ 40.324] (II) config/udev: Adding input device Generic PS/2
mouse (/dev/input/event7)
[ 40.324] (**) Generic PS/2 mouse: Applying InputClass "evdev
pointer catchall"
[ 40.324] (**) Generic PS/2 mouse: Applying InputClass
"libinput pointer catchall"
[ 40.324] (II) Using input driver 'libinput' for 'Generic PS/2
mouse'
[ 40.324] (**) Generic PS/2 mouse: always reports core events
[ 40.324] (**) Option "Device" "/dev/input/event7"
[ 40.324] (**) Option "_source" "server/udev"
[ 40.325] (II) event7 - Generic PS/2 mouse: is tagged by udev
as: Mouse
[ 40.325] (II) event7 - Generic PS/2 mouse: device is a
pointer
[ 40.326] (II) event7 - Generic PS/2 mouse: device removed
[ 40.326] (**) Option "config_info" "udev:/dev/input/event7"
[ 40.326] (II) XINPUT: Adding extended input device "Generic
PS/2 mouse" (type: MOUSE, id 19)
[ 40.326] (**) Option "AccelerationScheme" "none"
[ 40.326] (**) Generic PS/2 mouse: (accel) selected scheme
none/0
[ 40.326] (**) Generic PS/2 mouse: (accel) acceleration factor:
2.000
[ 40.326] (**) Generic PS/2 mouse: (accel) acceleration
threshold: 4
[ 40.327] (II) event7 - Generic PS/2 mouse: is tagged by udev
as: Mouse
[ 40.328] (II) event7 - Generic PS/2 mouse: device is a
pointer
[ 40.329] (II) config/udev: Adding input device Yubico Yubikey
NEO OTP+U2F+CCID (/dev/input/event8)
[ 40.329] (**) Yubico Yubikey NEO OTP+U2F+CCID: Applying
InputClass "evdev keyboard catchall"
[ 40.329] (**) Yubico Yubikey NEO OTP+U2F+CCID: Applying
InputClass "Evdev keyboard"
[ 40.329] (**) Yubico Yubikey NEO OTP+U2F+CCID: Applying
InputClass "libinput keyboard catchall"
[ 40.329] (**) Yubico Yubikey NEO OTP+U2F+CCID: Applying
InputClass "keyboard"
[ 40.329] (II) Using input driver 'libinput' for 'Yubico
Yubikey NEO OTP+U2F+CCID'
[ 40.329] (**) Yubico Yubikey NEO OTP+U2F+CCID: always reports
core events
[ 40.329] (**) Option "Device" "/dev/input/event8"
[ 40.329] (**) Option "_source" "server/udev"
[ 40.330] (II) event8 - Yubico Yubikey NEO OTP+U2F+CCID, class
0/0, rev 2.00/3.49, addr 1: is tagged by udev as: Keyboard
[ 40.330] (II) event8 - Yubico Yubikey NEO OTP+U2F+CCID, class
0/0, rev 2.00/3.49, addr 1: device is a keyboard
[ 40.331] (II) event8 - Yubico Yubikey NEO OTP+U2F+CCID, class
0/0, rev 2.00/3.49, addr 1: device removed
[ 40.331] (**) Option "config_info" "udev:/dev/input/event8"
[ 40.331] (II) XINPUT: Adding extended input device "Yubico
Yubikey NEO OTP+U2F+CCID" (type: KEYBOARD, id 20)
[ 40.331] (**) Option "xkb_rules" "evdev"
[ 40.331] (**) Option "xkb_layout" "de,us,fr"
[ 40.331] (WW) Option "xkb_variant" requires a string value
[ 40.332] (II) event8 - Yubico Yubikey NEO OTP+U2F+CCID, class
0/0, rev 2.00/3.49, addr 1: is tagged by udev as: Keyboard
[ 40.332] (II) event8 - Yubico Yubikey NEO OTP+U2F+CCID, class
0/0, rev 2.00/3.49, addr 1: device is a keyboard
[ 40.334] (II) config/udev: Adding input device CM Storm
Quickfire TKL 6keys (/dev/input/event9)
[ 40.334] (**) CM Storm Quickfire TKL 6keys: Applying
InputClass "evdev keyboard catchall"
[ 40.334] (**) CM Storm Quickfire TKL 6keys: Applying
InputClass "Evdev keyboard"
[ 40.334] (**) CM Storm Quickfire TKL 6keys: Applying
InputClass "libinput keyboard catchall"
[ 40.334] (**) CM Storm Quickfire TKL 6keys: Applying
InputClass "keyboard"
[ 40.334] (II) Using input driver 'libinput' for 'CM Storm
Quickfire TKL 6keys'
[ 40.334] (**) CM Storm Quickfire TKL 6keys: always reports
core events
[ 40.334] (**) Option "Device" "/dev/input/event9"
[ 40.334] (**) Option "_source" "server/udev"
[ 40.335] (II) event9 - CM Storm Quickfire TKL 6keys, class
0/0, rev 1.10/1.11, addr 7: is tagged by udev as: Keyboard
[ 40.335] (II) event9 - CM Storm Quickfire TKL 6keys, class
0/0, rev 1.10/1.11, addr 7: device is a keyboard
[ 40.336] (II) event9 - CM Storm Quickfire TKL 6keys, class
0/0, rev 1.10/1.11, addr 7: device removed
[ 40.336] (**) Option "config_info" "udev:/dev/input/event9"
[ 40.336] (II) XINPUT: Adding extended input device "CM Storm
Quickfire TKL 6keys" (type: KEYBOARD, id 21)
[ 40.336] (**) Option "xkb_rules" "evdev"
[ 40.336] (**) Option "xkb_layout" "de,us,fr"
[ 40.336] (WW) Option "xkb_variant" requires a string value
[ 40.337] (II) event9 - CM Storm Quickfire TKL 6keys, class
0/0, rev 1.10/1.11, addr 7: is tagged by udev as: Keyboard
[ 40.338] (II) event9 - CM Storm Quickfire TKL 6keys, class
0/0, rev 1.10/1.11, addr 7: device is a keyboard
[ 40.364] (**) Wacom Pen and multitouch sensor Pen eraser:
Applying InputClass "evdev tablet catchall"
[ 40.364] (**) Wacom Pen and multitouch sensor Pen eraser:
Applying InputClass "libinput tablet catchall"
[ 40.364] (**) Wacom Pen and multitouch sensor Pen eraser:
Applying InputClass "Wacom USB tablet class"
[ 40.364] (**) Wacom Pen and multitouch sensor Pen eraser:
Applying InputClass "Wacom tablet class"
[ 40.364] (II) Using input driver 'wacom' for 'Wacom Pen and
multitouch sensor Pen eraser'
[ 40.364] (**) Wacom Pen and multitouch sensor Pen eraser:
always reports core events
[ 40.364] (**) Option "Device" "/dev/input/event17"
[ 40.364] (**) Option "Type" "eraser"
[ 40.365] (**) Wacom Pen and multitouch sensor Pen eraser:
panscroll is 1300
[ 40.365] (**) Wacom Pen and multitouch sensor Pen eraser:
panscroll modified to 1300
[ 40.365] (--) Wacom Pen and multitouch sensor Pen eraser:
maxX=30935 maxY=17401 maxZ=4095 resX=100000 resY=100000
tilt=enabled
[ 40.365] (**) Option "config_info" "udev:/dev/input/event17"
[ 40.365] (II) XINPUT: Adding extended input device "Wacom Pen
and multitouch sensor Pen eraser" (type: ERASER, id 22)
[ 40.365] (**) Wacom Pen and multitouch sensor Pen eraser:
(accel) keeping acceleration scheme 1
[ 40.365] (**) Wacom Pen and multitouch sensor Pen eraser:
(accel) acceleration profile 0
[ 40.365] (**) Wacom Pen and multitouch sensor Pen eraser:
(accel) acceleration factor: 2.000
[ 40.365] (**) Wacom Pen and multitouch sensor Pen eraser:
(accel) acceleration threshold: 4
[ 40.963] (II) intel(0): EDID vendor "AUO", prod id 8246
[ 40.963] (II) intel(0): Printing DDC gathered Modelines:
[ 40.963] (II) intel(0): Modeline "2560x1440"x0.0 245.50 2560
2608 2640 2720 1440 1443 1448 1504 -hsync -vsync (90.3 kHz eP)
[ 41.311] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 62.329] (II) intel(0): resizing framebuffer to 5120x1440
[ 62.369] (II) intel(0): switch to mode 2560x1440@60.0 on
HDMI-1 using pipe 1, position (2560, 0), rotation normal,
reflection none
[ 74.627] (--) intel(0): HDMI max TMDS frequency 300000KHz
#########################################
/var/log/messages
Mar 25 15:24:16 danton kernel: ---<<BOOT>>---
Mar 25 15:24:16 danton kernel: Copyright (c) 1992-2021 The FreeBSD
Project.
Mar 25 15:24:16 danton kernel: Copyright (c) 1979, 1980, 1983,
1986, 1988, 1989, 1991, 1992, 1993, 1994
Mar 25 15:24:16 danton kernel: The Regents of the University of
California. All rights reserved.
Mar 25 15:24:16 danton kernel: FreeBSD is a registered trademark
of The FreeBSD Foundation.
Mar 25 15:24:16 danton kernel: FreeBSD 13.2-STABLE
stable/13-n254907-3c7ef29e8998 GENERIC amd64
Mar 25 15:24:16 danton kernel: FreeBSD clang version 14.0.5
(https://github.com/llvm/llvm-project.git
llvmorg-14.0.5-0-gc12386ae247c)
Mar 25 15:24:16 danton kernel: VT(efifb): resolution 2560x1440
Mar 25 15:24:16 danton kernel: CPU: Intel(R) Core(TM) i7-8550U CPU
@ 1.80GHz (2000.00-MHz K8-class CPU)
Mar 25 15:24:16 danton kernel: Origin="GenuineIntel" Id=0x806ea
Family=0x6 Model=0x8e Stepping=10
Mar 25 15:24:16 danton kernel:
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Mar 25 15:24:16 danton kernel:
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
Mar 25 15:24:16 danton kernel: AMD
Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
Mar 25 15:24:16 danton kernel: AMD
Features2=0x121<LAHF,ABM,Prefetch>
Mar 25 15:24:16 danton kernel: Structured Extended
Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
Mar 25 15:24:16 danton kernel: Structured Extended
Features3=0xbc002e00<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
Mar 25 15:24:16 danton kernel: XSAVE
Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
Mar 25 15:24:16 danton kernel: IA32_ARCH_CAPS=0xc04<RSBA>
Mar 25 15:24:16 danton kernel: VT-x:
PAT,HLT,MTF,PAUSE,EPT,UG,VPID
Mar 25 15:24:16 danton kernel: TSC: P-state invariant,
performance statistics
Mar 25 15:24:16 danton kernel: real memory = 17179869184 (16384
MB)
Mar 25 15:24:16 danton kernel: avail memory = 16340635648 (15583
MB)
Mar 25 15:24:16 danton kernel: CPU microcode: no matching update
found
Mar 25 15:24:16 danton kernel: Event timer "LAPIC" quality 600
Mar 25 15:24:16 danton kernel: ACPI APIC Table: <LENOVO TP-N25 >
Mar 25 15:24:16 danton kernel: FreeBSD/SMP: Multiprocessor System
Detected: 8 CPUs
Mar 25 15:24:16 danton kernel: FreeBSD/SMP: 1 package(s) x 4
core(s) x 2 hardware threads
Mar 25 15:24:16 danton kernel: random: registering fast source
Intel Secure Key RNG
Mar 25 15:24:16 danton kernel: random: fast provider: "Intel
Secure Key RNG"
Mar 25 15:24:16 danton kernel: random: unblocking device.
Mar 25 15:24:16 danton kernel: ioapic0 <Version 2.0> irqs 0-119
Mar 25 15:24:16 danton kernel: Launching APs: 1 7 4 2 3 6 5
Mar 25 15:24:16 danton kernel: Cuse v0.1.37 @ /dev/cuse
Mar 25 15:24:16 danton kernel: random: entropy device external
interface
Mar 25 15:24:16 danton kernel: kbd1 at kbdmux0
Mar 25 15:24:16 danton kernel: efirtc0: <EFI Realtime Clock>
Mar 25 15:24:16 danton kernel: efirtc0: registered as a
time-of-day clock, resolution 1.000000s
Mar 25 15:24:16 danton kernel: smbios0: <System Management BIOS>
at iomem 0x9f09c000-0x9f09c01e
Mar 25 15:24:16 danton kernel: smbios0: Version: 3.0, BCD
Revision: 3.0
Mar 25 15:24:16 danton kernel: aesni0:
<AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
Mar 25 15:24:16 danton kernel: acpi0: <LENOVO TP-N25>
Mar 25 15:24:16 danton kernel: acpi_ec0: <Embedded Controller: GPE
0x16, ECDT> port 0x62,0x66 on acpi0
Mar 25 15:24:16 danton kernel: acpi0: Power Button (fixed)
Mar 25 15:24:16 danton kernel: cpu0: <ACPI CPU> on acpi0
Mar 25 15:24:16 danton kernel: hpet0: <High Precision Event Timer>
iomem 0xfed00000-0xfed003ff on acpi0
Mar 25 15:24:16 danton kernel: Timecounter "HPET" frequency
24000000 Hz quality 950
Mar 25 15:24:16 danton kernel: Event timer "HPET" frequency
24000000 Hz quality 550
Mar 25 15:24:16 danton kernel: atrtc0: <AT realtime clock> port
0x70-0x77 irq 8 on acpi0
Mar 25 15:24:16 danton kernel: atrtc0: Warning: Couldn't map I/O.
Mar 25 15:24:16 danton kernel: atrtc0: registered as a time-of-day
clock, resolution 1.000000s
Mar 25 15:24:16 danton kernel: Event timer "RTC" frequency 32768
Hz quality 0
Mar 25 15:24:16 danton kernel: attimer0: <AT timer> port
0x40-0x43,0x50-0x53 irq 0 on acpi0
Mar 25 15:24:16 danton kernel: Timecounter "i8254" frequency
1193182 Hz quality 0
Mar 25 15:24:16 danton kernel: Event timer "i8254" frequency
1193182 Hz quality 100
Mar 25 15:24:16 danton kernel: Timecounter "ACPI-fast" frequency
3579545 Hz quality 900
Mar 25 15:24:16 danton kernel: acpi_timer0: <24-bit timer at
3.579545MHz> port 0x1808-0x180b on acpi0
Mar 25 15:24:16 danton kernel: pcib0: <ACPI Host-PCI bridge> port
0xcf8-0xcff on acpi0
Mar 25 15:24:16 danton kernel: pci0: <ACPI PCI bus> on pcib0
Mar 25 15:24:16 danton kernel: vgapci0: <VGA-compatible display>
port 0xe000-0xe03f mem
0x2ffe000000-0x2ffeffffff,0xc0000000-0xdfffffff irq 16 at device
2.0 on pci0
Mar 25 15:24:16 danton kernel: acpi_video0: <ACPI video extension>
on vgapci0
Mar 25 15:24:16 danton kernel: vgapci0: Boot video device
Mar 25 15:24:16 danton kernel: pci0: <old, non-VGA display device>
at device 19.0 (no driver attached)
Mar 25 15:24:16 danton kernel: xhci0: <Intel Sunrise Point-LP USB
3.0 controller> mem 0xe0520000-0xe052ffff at device 20.0 on pci0
Mar 25 15:24:16 danton kernel: xhci0: 32 bytes context size,
64-bit DMA
Mar 25 15:24:16 danton kernel: usbus0 on xhci0
Mar 25 15:24:16 danton kernel: usbus0: 5.0Gbps Super Speed USB
v3.0
Mar 25 15:24:16 danton kernel: pci0: <simple comms> at device 22.0
(no driver attached)
Mar 25 15:24:16 danton kernel: pcib1: <ACPI PCI-PCI bridge> at
device 28.0 on pci0
Mar 25 15:24:16 danton kernel: pci1: <ACPI PCI bus> on pcib1
Mar 25 15:24:16 danton kernel: pci1: <network> at device 0.0 (no
driver attached)
Mar 25 15:24:16 danton kernel: pcib2: <ACPI PCI-PCI bridge> at
device 28.2 on pci0
Mar 25 15:24:16 danton kernel: pci2: <ACPI PCI bus> on pcib2
Mar 25 15:24:16 danton kernel: pci2: <wireless controller> at
device 0.0 (no driver attached)
Mar 25 15:24:16 danton kernel: pcib3: <ACPI PCI-PCI bridge> at
device 28.4 on pci0
Mar 25 15:24:16 danton kernel: pci3: <ACPI PCI bus> on pcib3
Mar 25 15:24:16 danton kernel: nvme0: <Generic NVMe Device> mem
0xe0200000-0xe0203fff at device 0.0 on pci3
Mar 25 15:24:16 danton kernel: pcib4: <ACPI PCI-PCI bridge> at
device 29.0 on pci0
Mar 25 15:24:16 danton kernel: pci4: <ACPI PCI bus> on pcib4
Mar 25 15:24:16 danton kernel: isab0: <PCI-ISA bridge> at device
31.0 on pci0
Mar 25 15:24:16 danton kernel: isa0: <ISA bus> on isab0
Mar 25 15:24:16 danton kernel: pci0: <memory> at device 31.2 (no
driver attached)
Mar 25 15:24:16 danton kernel: hdac0: <Intel Kaby Lake-LP HDA
Controller> mem
0x2fff018000-0x2fff01bfff,0x2fff000000-0x2fff00ffff at device 31.3
on pci0
Mar 25 15:24:16 danton kernel: em0: <Intel(R) I219-V SPT(4)> mem
0xe0500000-0xe051ffff at device 31.6 on pci0
Mar 25 15:24:16 danton kernel: em0: EEPROM V0.1-4
Mar 25 15:24:16 danton kernel: em0: Using 1024 TX descriptors and
1024 RX descriptors
Mar 25 15:24:16 danton kernel: em0: Using an MSI interrupt
Mar 25 15:24:16 danton kernel: em0: Ethernet address:
48:2a:e3:1a:da:58
Mar 25 15:24:16 danton kernel: em0: netmap queues/slots: TX
1/1024, RX 1/1024
Mar 25 15:24:16 danton kernel: acpi_button0: <Sleep Button> on
acpi0
Mar 25 15:24:16 danton kernel: acpi_lid0: <Control Method Lid
Switch> on acpi0
Mar 25 15:24:16 danton kernel: acpi_tz0: <Thermal Zone> on acpi0
Mar 25 15:24:16 danton kernel: atkbdc0: <Keyboard controller
(i8042)> port 0x60,0x64 irq 1 on acpi0
Mar 25 15:24:16 danton kernel: atkbd0: <AT Keyboard> irq 1 on
atkbdc0
Mar 25 15:24:16 danton kernel: kbd0 at atkbd0
Mar 25 15:24:16 danton kernel: atkbd0: [GIANT-LOCKED]
Mar 25 15:24:16 danton kernel: psm0: <PS/2 Mouse> irq 12 on
atkbdc0
Mar 25 15:24:16 danton kernel: psm0: [GIANT-LOCKED]
Mar 25 15:24:16 danton kernel: WARNING: Device "psm" is Giant
locked and may be deleted before FreeBSD 14.0.
Mar 25 15:24:16 danton kernel: psm0: model Synaptics Touchpad,
device ID 0
Mar 25 15:24:16 danton kernel: acpi_ibm0: <ThinkPad ACPI Extras>
on acpi0
Mar 25 15:24:16 danton kernel: acpi_ibm0: Firmware version is
0x200
Mar 25 15:24:16 danton kernel: acpi_acad0: <AC Adapter> on acpi0
Mar 25 15:24:16 danton kernel: battery0: <ACPI Control Method
Battery> on acpi0
Mar 25 15:24:16 danton kernel: coretemp0: <CPU On-Die Thermal
Sensors> on cpu0
Mar 25 15:24:16 danton kernel: hwpstate_intel0: <Intel Speed
Shift> on cpu0
Mar 25 15:24:16 danton kernel: hwpstate_intel1: <Intel Speed
Shift> on cpu1
Mar 25 15:24:16 danton kernel: hwpstate_intel2: <Intel Speed
Shift> on cpu2
Mar 25 15:24:16 danton kernel: hwpstate_intel3: <Intel Speed
Shift> on cpu3
Mar 25 15:24:16 danton kernel: hwpstate_intel4: <Intel Speed
Shift> on cpu4
Mar 25 15:24:16 danton kernel: hwpstate_intel5: <Intel Speed
Shift> on cpu5
Mar 25 15:24:16 danton kernel: hwpstate_intel6: <Intel Speed
Shift> on cpu6
Mar 25 15:24:16 danton kernel: hwpstate_intel7: <Intel Speed
Shift> on cpu7
Mar 25 15:24:16 danton kernel: Timecounter "TSC" frequency
1991998467 Hz quality 1000
Mar 25 15:24:16 danton kernel: Timecounters tick every 1.000 msec
Mar 25 15:24:16 danton kernel: ZFS filesystem version: 5
Mar 25 15:24:16 danton kernel: ZFS storage pool version: features
support (5000)
Mar 25 15:24:16 danton kernel: [nl_generic] genl_register_family:
Registered family nlctrl id 16
Mar 25 15:24:16 danton kernel: [nl_generic] genl_register_cmds:
Adding cmd GETFAMILY(3) to family nlctrl
Mar 25 15:24:16 danton kernel: ugen0.1: <Intel XHCI root HUB> at
usbus0
Mar 25 15:24:16 danton kernel: uhub0 on usbus0
Mar 25 15:24:16 danton kernel: uhub0: <Intel XHCI root HUB, class
9/0, rev 3.00/1.00, addr 1> on usbus0
Mar 25 15:24:16 danton kernel: nvd0: <SAMSUNG MZVLB1T0HALR-000L7>
NVMe namespace
Mar 25 15:24:16 danton kernel: nvd0: 976762MB (2000409264 512 byte
sectors)
Mar 25 15:24:16 danton kernel: hdacc0: <Realtek ALC285 HDA CODEC>
at cad 0 on hdac0
Mar 25 15:24:16 danton kernel: GEOM_ELI: Device nvd0p4.eli
created.
Mar 25 15:24:16 danton kernel: hdaa0: <Realtek ALC285 Audio
Function Group>GEOM_ELI: Encryption: AES-XTS 256
Mar 25 15:24:16 danton kernel: GEOM_ELI: Crypto: accelerated
software
Mar 25 15:24:16 danton kernel: at nid 1 on hdacc0
Mar 25 15:24:16 danton kernel: pcm0: <Realtek ALC285 (Internal
Analog)> at nid 20 and 18 on hdaa0
Mar 25 15:24:16 danton kernel: pcm1: <Realtek ALC285 (Right
Analog)> at nid 33 and 25 on hdaa0
Mar 25 15:24:16 danton kernel: hdacc1: <Intel Kaby Lake HDA CODEC>
at cad 2 on hdac0
Mar 25 15:24:16 danton kernel: hdaa1: <Intel Kaby Lake Audio
Function Group> at nid 1 on hdacc1
Mar 25 15:24:16 danton kernel: pcm2: <Intel Kaby Lake (HDMI/DP
8ch)> at nid 3 on hdaa1
Mar 25 15:24:16 danton kernel: Trying to mount root from
zfs:zroot/ROOT/13.2-STABLE-20230324.175801 []...
Mar 25 15:24:16 danton kernel: uhub0: 18 ports with 18 removable,
self powered
Mar 25 15:24:16 danton kernel: Root mount waiting for: usbus0
Mar 25 15:24:16 danton kernel: ugen0.2: <Yubico Yubikey NEO
OTP+U2F+CCID> at usbus0
Mar 25 15:24:16 danton kernel: ukbd0 on uhub0
Mar 25 15:24:16 danton kernel: ukbd0: <Yubico Yubikey NEO
OTP+U2F+CCID, class 0/0, rev 2.00/3.49, addr 1> on usbus0
Mar 25 15:24:16 danton kernel: kbd2 at ukbd0
Mar 25 15:24:16 danton kernel: ugen0.3: <VIA Labs, Inc. USB2.0
Hub> at usbus0
Mar 25 15:24:16 danton kernel: uhub1 on uhub0
Mar 25 15:24:16 danton kernel: uhub1: <VIA Labs, Inc. USB2.0 Hub,
class 9/0, rev 2.10/90.14, addr 2> on usbus0
Mar 25 15:24:16 danton kernel: uhub1: MTT enabled
Mar 25 15:24:16 danton kernel: Root mount waiting for: usbus0
Mar 25 15:24:16 danton syslogd: last message repeated 1 times
Mar 25 15:24:16 danton kernel: uhub1: 4 ports with 4 removable,
self powered
Mar 25 15:24:16 danton kernel: ugen0.4: <Wacom Co.,Ltd. Intuos
PTS> at usbus0
Mar 25 15:24:16 danton kernel: Root mount waiting for: usbus0
Mar 25 15:24:16 danton kernel: ugen0.5: <VIA Labs, Inc. USB2.0
Hub> at usbus0
Mar 25 15:24:16 danton kernel: uhub2 on uhub1
Mar 25 15:24:16 danton kernel: uhub2: <VIA Labs, Inc. USB2.0 Hub,
class 9/0, rev 2.10/90.14, addr 4> on usbus0
Mar 25 15:24:16 danton kernel: uhub2: MTT enabled
Mar 25 15:24:16 danton kernel: Root mount waiting for: usbus0
Mar 25 15:24:16 danton syslogd: last message repeated 1 times
Mar 25 15:24:16 danton kernel: uhub2: 4 ports with 4 removable,
self powered
Mar 25 15:24:16 danton kernel: Root mount waiting for: usbus0
Mar 25 15:24:16 danton kernel: ugen0.6: <Burr-Brown from TI USB
Audio CODEC> at usbus0
Mar 25 15:24:16 danton kernel: ugen0.7: <vendor 0x046d HD Pro
Webcam C920> at usbus0
Mar 25 15:24:16 danton kernel: ugen0.8: <CM Storm Quickfire TKL
6keys> at usbus0
Mar 25 15:24:16 danton kernel: ukbd1 on uhub2
Mar 25 15:24:16 danton kernel: ukbd1: <CM Storm Quickfire TKL
6keys, class 0/0, rev 1.10/1.11, addr 7> on usbus0
Mar 25 15:24:16 danton kernel: kbd3 at ukbd1
Mar 25 15:24:16 danton kernel: Root mount waiting for: usbus0
Mar 25 15:24:16 danton kernel: ugen0.9: <La-VIEW Technology
SteelSeries> at usbus0
Mar 25 15:24:16 danton kernel: ukbd2 on uhub2
Mar 25 15:24:16 danton kernel: ukbd2: <La-VIEW Technology
SteelSeries, class 0/0, rev 2.00/0.00, addr 8> on usbus0
Mar 25 15:24:16 danton kernel: kbd4 at ukbd2
Mar 25 15:24:16 danton kernel: ugen0.10: <Realtek ASUS USB-BT500>
at usbus0
Mar 25 15:24:16 danton kernel: Root mount waiting for: usbus0
Mar 25 15:24:16 danton kernel: ugen0.11: <vendor 0x8087 product
0x0a2b> at usbus0
Mar 25 15:24:16 danton kernel: ugen0.12: <SunplusIT Inc Integrated
Camera> at usbus0
Mar 25 15:24:16 danton kernel: Root mount waiting for: usbus0
Mar 25 15:24:16 danton kernel: ugen0.13: <vendor 0x06cb product
0x009a> at usbus0
Mar 25 15:24:16 danton kernel: ugen0.14: <Wacom Co.,Ltd. Pen and
multitouch sensor> at usbus0
Mar 25 15:24:16 danton kernel: ugen0.15: <VIA Labs, Inc. USB3.1
Hub> at usbus0
Mar 25 15:24:16 danton kernel: uhub3 on uhub0
Mar 25 15:24:16 danton kernel: uhub3: <VIA Labs, Inc. USB3.1 Hub,
class 9/0, rev 3.20/90.14, addr 14> on usbus0
Mar 25 15:24:16 danton kernel: Root mount waiting for: usbus0
Mar 25 15:24:16 danton syslogd: last message repeated 1 times
Mar 25 15:24:16 danton kernel: uhub3: 4 ports with 4 removable,
self powered
Mar 25 15:24:16 danton kernel: Root mount waiting for: usbus0
Mar 25 15:24:16 danton kernel: ugen0.16: <VIA Labs, Inc. USB3.1
Hub> at usbus0
Mar 25 15:24:16 danton kernel: uhub4 on uhub3
Mar 25 15:24:16 danton kernel: uhub4: <VIA Labs, Inc. USB3.1 Hub,
class 9/0, rev 3.20/90.14, addr 15> on usbus0
Mar 25 15:24:16 danton kernel: Root mount waiting for: usbus0
Mar 25 15:24:16 danton kernel: uhub4: 4 ports with 4 removable,
self powered
Mar 25 15:24:16 danton kernel: Root mount waiting for: usbus0
Mar 25 15:24:16 danton kernel: ugen0.17: <Generic USB3.0-CRW> at
usbus0
Mar 25 15:24:16 danton kernel: umass0 on uhub0
Mar 25 15:24:16 danton kernel: umass0: <Bulk-In, Bulk-Out,
Interface> on usbus0
Mar 25 15:24:16 danton kernel: umass0: SCSI over Bulk-Only;
quirks = 0x4000
Mar 25 15:24:16 danton kernel: umass0:0:0: Attached to scbus0
Mar 25 15:24:16 danton kernel: (probe0:umass-sim0:0:0:0): REPORT
LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
Mar 25 15:24:16 danton kernel: (probe0:umass-sim0:0:0:0): CAM
status: SCSI Status Error
Mar 25 15:24:16 danton kernel: (probe0:umass-sim0:0:0:0): SCSI
status: Check Condition
Mar 25 15:24:16 danton kernel: (probe0:umass-sim0:0:0:0): SCSI
sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB)
Mar 25 15:24:16 danton kernel: (probe0:umass-sim0:0:0:0): Error
22, Unretryable error
Mar 25 15:24:16 danton kernel: da0 at umass-sim0 bus 0 scbus0
target 0 lun 0
Mar 25 15:24:16 danton kernel: da0: <Generic- SD/MMC CRW 1.00>
Removable Direct Access SPC-4 SCSI device
Mar 25 15:24:16 danton kernel: da0: Serial Number
28203008282014000
Mar 25 15:24:16 danton kernel: da0: 400.000MB/s transfers
Mar 25 15:24:16 danton kernel: da0: Attempt to query device size
failed: NOT READY, Medium not present
Mar 25 15:24:16 danton kernel: da0: quirks=0x2<NO_6_BYTE>
Mar 25 15:24:16 danton kernel: GEOM_ELI: Device nvd0p3.eli
created.
Mar 25 15:24:16 danton kernel: GEOM_ELI: Encryption: AES-XTS 128
Mar 25 15:24:16 danton kernel: GEOM_ELI: Crypto: accelerated
software
Mar 25 15:24:16 danton kernel: KLD vboxdrv.ko: depends on kernel -
not available or version mismatch
Mar 25 15:24:16 danton kernel: linker_load_file:
/boot/modules/vboxdrv.ko - unsupported file type
Mar 25 15:24:16 danton kernel: drmn0: <drmn> on vgapci0
Mar 25 15:24:16 danton kernel: vgapci0: child drmn0 requested
pci_enable_io
Mar 25 15:24:16 danton syslogd: last message repeated 1 times
Mar 25 15:24:16 danton kernel: [drm] Unable to create a private
tmpfs mount, hugepage support will be disabled(-19).
Mar 25 15:24:16 danton kernel: [drm] Got stolen memory base
0xaa800000, size 0x2000000
Mar 25 15:24:16 danton kernel: lkpi_iic0: <LinuxKPI I2C> on drmn0
Mar 25 15:24:16 danton kernel: iicbus0: <Philips I2C bus> on
lkpi_iic0
Mar 25 15:24:16 danton kernel: iic0: <I2C generic I/O> on iicbus0
Mar 25 15:24:16 danton kernel: lkpi_iic1: <LinuxKPI I2C> on drmn0
Mar 25 15:24:16 danton kernel: iicbus1: <Philips I2C bus> on
lkpi_iic1
Mar 25 15:24:16 danton kernel: iic1: <I2C generic I/O> on iicbus1
Mar 25 15:24:16 danton kernel: lkpi_iic2: <LinuxKPI I2C> on drmn0
Mar 25 15:24:16 danton kernel: iicbus2: <Philips I2C bus> on
lkpi_iic2
Mar 25 15:24:16 danton kernel: iic2: <I2C generic I/O> on iicbus2
Mar 25 15:24:16 danton kernel: drmn0: successfully loaded firmware
image 'i915/kbl_dmc_ver1_04.bin'
Mar 25 15:24:16 danton kernel: drmn0: [drm] Finished loading DMC
firmware i915/kbl_dmc_ver1_04.bin (v1.4)
Mar 25 15:24:16 danton kernel: drmn0: [drm] Reducing the
compressed framebuffer size. This may lead to less power savings
than a non-reduced-size. Try to increase stolen memory size if
available in BIOS.
Mar 25 15:24:16 danton kernel: sysctl_warn_reuse: can't re-use a
leaf (hw.dri.debug)!
Mar 25 15:24:16 danton kernel: lkpi_iic3: <LinuxKPI I2C> on drm1
Mar 25 15:24:16 danton kernel: iicbus3: <Philips I2C bus> on
lkpi_iic3
Mar 25 15:24:16 danton kernel: iic3: <I2C generic I/O> on iicbus3
Mar 25 15:24:16 danton kernel: lkpi_iic4: <LinuxKPI I2C> on drm2
Mar 25 15:24:16 danton kernel: iicbus4: <Philips I2C bus> on
lkpi_iic4
Mar 25 15:24:16 danton kernel: iic4: <I2C generic I/O> on iicbus4
Mar 25 15:24:16 danton kernel: lkpi_iic5: <LinuxKPI I2C> on drm4
Mar 25 15:24:16 danton kernel: iicbus5: <Philips I2C bus> on
lkpi_iic5
Mar 25 15:24:16 danton kernel: iic5: <I2C generic I/O> on iicbus5
Mar 25 15:24:16 danton kernel: [drm] Initialized i915 1.6.0
20200917 for drmn0 on minor 0
Mar 25 15:24:16 danton kernel: VT: Replacing driver "efifb" with
new "fb".
Mar 25 15:24:16 danton kernel: start FB_INFO:
Mar 25 15:24:16 danton kernel: type=11 height=1440 width=2560
depth=32
Mar 25 15:24:16 danton kernel: pbase=0xc0000000
vbase=0xfffff800c0000000
Mar 25 15:24:16 danton kernel: name=drmn0 flags=0x0 stride=10240
bpp=32
Mar 25 15:24:16 danton kernel: end FB_INFO
Mar 25 15:24:16 danton kernel: Intel(R) Wireless WiFi based driver
for FreeBSD
Mar 25 15:24:16 danton kernel: pchtherm0: <Skylake PCH Thermal
Subsystem> mem 0x2fff01f000-0x2fff01ffff at device 20.2 on pci0
Mar 25 15:24:16 danton kernel: ig4iic0: <Intel Sunrise Point-LP
I2C Controller-0> mem 0x2fff01e000-0x2fff01efff at device 21.0 on
pci0
Mar 25 15:24:16 danton kernel: ig4iic0: Using MSI
Mar 25 15:24:16 danton kernel: iicbus6: <Philips I2C bus
(ACPI-hinted)> on ig4iic0
Mar 25 15:24:16 danton kernel: iic6: <I2C generic I/O> on iicbus6
Mar 25 15:24:16 danton kernel: ichsmb0: <Intel Sunrise Point-LP
SMBus controller> port 0xefa0-0xefbf mem 0x2fff01c000-0x2fff01c0ff
at device 31.4 on pci0
Mar 25 15:24:16 danton kernel: smbus0: <System Management Bus> on
ichsmb0
Mar 25 15:24:16 danton kernel: iwm0: <Intel(R) Dual Band Wireless
AC 8265> mem 0xe0400000-0xe0401fff at device 0.0 on pci1
Mar 25 15:24:16 danton kernel: iwm0: hw rev 0x230, fw ver
22.361476.0, address 18:1d:ea:16:cc:77
Mar 25 15:24:16 danton kernel: acpi_wmi0: <ACPI-WMI mapping> on
acpi0
Mar 25 15:24:16 danton kernel: acpi_wmi1: <ACPI-WMI mapping> on
acpi0
Mar 25 15:24:16 danton kernel: acpi_wmi1: Embedded MOF found
Mar 25 15:24:16 danton kernel: ACPI: \_SB.WMI1.WQBA: 1 arguments
were passed to a non-method ACPI object (Buffer)
(20201113/nsarguments-361)
Mar 25 15:24:16 danton kernel: acpi_wmi2: <ACPI-WMI mapping> on
acpi0
Mar 25 15:24:16 danton kernel: acpi_wmi2: Embedded MOF found
Mar 25 15:24:16 danton kernel: ACPI: \_SB.WMI2.WQBB: 1 arguments
were passed to a non-method ACPI object (Buffer)
(20201113/nsarguments-361)
Mar 25 15:24:16 danton kernel: acpi_wmi3: <ACPI-WMI mapping> on
acpi0
Mar 25 15:24:16 danton kernel: acpi_wmi3: Embedded MOF found
Mar 25 15:24:16 danton kernel: ACPI: \_SB.WMI3.WQBC: 1 arguments
were passed to a non-method ACPI object (Buffer)
(20201113/nsarguments-361)
Mar 25 15:24:16 danton kernel: acpi_wmi4: <ACPI-WMI mapping> on
acpi0
Mar 25 15:24:16 danton kernel: acpi_wmi4: Embedded MOF found
Mar 25 15:24:16 danton kernel: ACPI: \_SB.AMW0.WQDD: 1 arguments
were passed to a non-method ACPI object (Buffer)
(20201113/nsarguments-361)
Mar 25 15:24:16 danton kernel: wlan0: Ethernet address:
48:2a:e3:1a:da:58
Mar 25 15:24:16 danton kernel: lo0: link state changed to UP
Mar 25 15:24:16 danton kernel: lagg0: link state changed to DOWN
Mar 25 15:24:16 danton kernel: em0: link state changed to UP
Mar 25 15:24:16 danton kernel: wlan0: link state changed to UP
Mar 25 15:24:16 danton kernel: lagg0: link state changed to UP
Mar 25 15:24:16 danton kernel: uhid0 on uhub0
Mar 25 15:24:16 danton kernel: uhid0: <Yubico Yubikey NEO
OTP+U2F+CCID, class 0/0, rev 2.00/3.49, addr 1> on usbus0
Mar 25 15:24:16 danton kernel: uhid1 on uhub1
Mar 25 15:24:16 danton kernel: uhid1: <Wacom Co.,Ltd. Intuos PTS,
class 0/0, rev 2.00/1.00, addr 3> on usbus0
Mar 25 15:24:16 danton kernel: uhid2 on uhub1
Mar 25 15:24:16 danton kernel: uhid2: <Wacom Co.,Ltd. Intuos PTS,
class 0/0, rev 2.00/1.00, addr 3> on usbus0
Mar 25 15:24:16 danton kernel: uhid3 on uhub1
Mar 25 15:24:16 danton kernel: uhid3: <Wacom Co.,Ltd. Intuos PTS,
class 0/0, rev 2.00/1.00, addr 3> on usbus0
Mar 25 15:24:16 danton kernel: uhid4 on uhub2
Mar 25 15:24:16 danton kernel: uhid4: <Burr-Brown from TI USB
Audio CODEC, class 0/0, rev 1.10/1.00, addr 5> on usbus0
Mar 25 15:24:16 danton kernel: uhid5 on uhub2
Mar 25 15:24:16 danton kernel: uhid5: <CM Storm Quickfire TKL
6keys, class 0/0, rev 1.10/1.11, addr 7> on usbus0
Mar 25 15:24:16 danton kernel: wmt0 on uhub0
Mar 25 15:24:16 danton kernel: wmt0: <Multitouch> on usbus0
Mar 25 15:24:16 danton kernel: wmt0: Multitouch touchscreen with 0
external buttons
Mar 25 15:24:16 danton kernel: wmt0: 10 contacts and [C]. Report
range [0:0] - [12372:6960]
Mar 25 15:24:16 danton kernel: uhid6 on uhub0
Mar 25 15:24:16 danton kernel: uhid6: <Pen> on usbus0
Mar 25 15:24:16 danton kernel: uhid1: at uhub1, port 1, addr 3
(disconnected)
Mar 25 15:24:16 danton kernel: uhid1: detached
Mar 25 15:24:16 danton kernel: uhid2: at uhub1, port 1, addr 3
(disconnected)
Mar 25 15:24:16 danton kernel: uhid2: detached
Mar 25 15:24:16 danton kernel: uhid1 on uhub1
Mar 25 15:24:16 danton kernel: uhid1: <Wacom Co.,Ltd. Intuos PTS,
class 0/0, rev 2.00/1.00, addr 3> on usbus0
Mar 25 15:24:16 danton kernel: uhid2 on uhub1
Mar 25 15:24:16 danton kernel: uhid2: <Wacom Co.,Ltd. Intuos PTS,
class 0/0, rev 2.00/1.00, addr 3> on usbus0
Mar 25 15:24:16 danton kernel: ums0 on uhub2
Mar 25 15:24:16 danton kernel: ums0: <La-VIEW Technology
SteelSeries, class 0/0, rev 2.00/0.00, addr 8> on usbus0
Mar 25 15:24:16 danton kernel: ums0: 8 buttons and [XYZT]
coordinates ID=1
Mar 25 15:24:16 danton kernel: uaudio0 on uhub2
Mar 25 15:24:16 danton kernel: uaudio0: <Burr-Brown from TI USB
Audio CODEC, class 0/0, rev 1.10/1.00, addr 5> on usbus0
Mar 25 15:24:16 danton kernel: uaudio0: Play[0]: 48000 Hz, 2 ch,
16-bit S-LE PCM format, 2x8ms buffer.
Mar 25 15:24:16 danton kernel: uaudio0: Play[0]: 44100 Hz, 2 ch,
16-bit S-LE PCM format, 2x8ms buffer.
Mar 25 15:24:16 danton kernel: uaudio0: Play[0]: 32000 Hz, 2 ch,
16-bit S-LE PCM format, 2x8ms buffer.
Mar 25 15:24:16 danton kernel: uaudio0: Record[0]: 48000 Hz, 2 ch,
16-bit S-LE PCM format, 2x8ms buffer.
Mar 25 15:24:16 danton kernel: uaudio0: Record[0]: 44100 Hz, 2 ch,
16-bit S-LE PCM format, 2x8ms buffer.
Mar 25 15:24:16 danton kernel: uaudio0: Record[0]: 32000 Hz, 2 ch,
16-bit S-LE PCM format, 2x8ms buffer.
Mar 25 15:24:16 danton kernel: uaudio0: Record[0]: 22050 Hz, 2 ch,
16-bit S-LE PCM format, 2x8ms buffer.
Mar 25 15:24:16 danton kernel: uaudio0: Record[0]: 16000 Hz, 2 ch,
16-bit S-LE PCM format, 2x8ms buffer.
Mar 25 15:24:16 danton kernel: uaudio0: Record[0]: 11025 Hz, 2 ch,
16-bit S-LE PCM format, 2x8ms buffer.
Mar 25 15:24:16 danton kernel: uaudio0: No MIDI sequencer.
Mar 25 15:24:16 danton kernel: pcm3: <USB audio> on uaudio0
Mar 25 15:24:16 danton kernel: uaudio0: HID volume keys found.
Mar 25 15:24:16 danton kernel: uaudio1 on uhub2
Mar 25 15:24:16 danton kernel: uaudio1: <vendor 0x046d HD Pro
Webcam C920, class 239/2, rev 2.00/0.11, addr 6> on usbus0
Mar 25 15:24:16 danton kernel: uaudio1: No playback.
Mar 25 15:24:16 danton kernel: uaudio1: Record[0]: 32000 Hz, 2 ch,
16-bit S-LE PCM format, 2x8ms buffer.
Mar 25 15:24:16 danton kernel: uaudio1: Record[0]: 24000 Hz, 2 ch,
16-bit S-LE PCM format, 2x8ms buffer.
Mar 25 15:24:16 danton kernel: uaudio1: Record[0]: 16000 Hz, 2 ch,
16-bit S-LE PCM format, 2x8ms buffer.
Mar 25 15:24:16 danton kernel: uaudio1: No MIDI sequencer.
Mar 25 15:24:16 danton kernel: pcm4: <USB audio> on uaudio1
Mar 25 15:24:16 danton kernel: uaudio1: No HID volume keys found.
Mar 25 15:24:16 danton kernel: ubt0 on uhub1
Mar 25 15:24:16 danton kernel: ubt0: <Bluetooth Radio> on usbus0
Mar 25 15:24:16 danton kernel: ubt1 on uhub0
Mar 25 15:24:16 danton kernel: ubt1: <vendor 0x8087 product
0x0a2b, class 224/1, rev 2.00/0.10, addr 10> on usbus0
Mar 25 15:24:16 danton kernel: iwm0: code ce, frame 2/12 b800002c
unhandled
Mar 25 15:24:16 danton kernel: wmt0: at uhub0, port 10, addr 13
(disconnected)
Mar 25 15:24:16 danton kernel: wmt0: detached
Mar 25 15:24:16 danton kernel: uhid6: at uhub0, port 10, addr 13
(disconnected)
Mar 25 15:24:16 danton kernel: uhid6: detached
Mar 25 15:24:16 danton kernel: iwm0: code ce, frame 2/36 b800002c
unhandled
Mar 25 15:24:16 danton kernel: WARNING: attempt to
domain_add(bluetooth) after domainfinalize()
Mar 25 15:24:16 danton kernel: WARNING: attempt to
domain_add(netgraph) after domainfinalize()
Mar 25 15:24:16 danton kernel: iwm0: code ce, frame 3/33 b800002c
unhandled
Mar 25 15:24:16 danton savecore[76942]: /dev/nvd0p3: Operation not
permitted
Mar 25 15:24:16 danton ntpd[5554]: ntpd 4.2.8p15-a (1): Starting
Mar 25 15:24:16 danton kernel: Security policy loaded: MAC/ntpd
(mac_ntpd)
Mar 25 15:24:16 danton ntpd[5554]: Command line: /usr/sbin/ntpd -p
/var/db/ntp/ntpd.pid -c /etc/ntp.conf -f /var/db/ntp/ntpd.drift
Mar 25 15:24:16 danton ntpd[5554]:
----------------------------------------------------
Mar 25 15:24:16 danton ntpd[5554]: ntp-4 is maintained by Network
Time Foundation,
Mar 25 15:24:16 danton ntpd[5554]: Inc. (NTF), a non-profit
501(c)(3) public-benefit
Mar 25 15:24:16 danton ntpd[5554]: corporation. Support and
training for ntp-4 are
Mar 25 15:24:16 danton ntpd[5554]: available at
https://www.nwtime.org/support
Mar 25 15:24:16 danton ntpd[5554]:
----------------------------------------------------
Mar 25 15:24:16 danton ntpd[6080]: leapsecond file
('/var/db/ntpd.leap-seconds.list'): good hash signature
Mar 25 15:24:16 danton ntpd[6080]: leapsecond file
('/var/db/ntpd.leap-seconds.list'): loaded,
expire=2023-06-28T00:00:00Z last=2017-01-01T00:00:00Z ofs=37
Mar 25 15:24:16 danton kernel: .
Mar 25 15:24:16 danton root[53869]: devd: !system=ACPI
subsystem=Video type=brightness notify=30
--
Mathias Picker
Geschäftsführer
Mathias.Picker@virtual-earth.de
virtual earth Gesellschaft für Wissens re/prä sentation mbH
http://www.virtual-earth.de/ HRB126870
support@virtual-earth.de Westendstr. 142
089 / 1250 3943