Re: Problem booting FreeBSD 13.0 and 13.1 on a box with an external HP enclose - panic in make_dev_alias_v
- Reply: Rainer Duffner : "Re: Problem booting FreeBSD 13.0 and 13.1 on a box with an external HP enclose - panic in make_dev_alias_v"
- In reply to: Rainer Duffner : "Problem booting FreeBSD 13.0 and 13.1 on a box with an external HP enclose - panic in make_dev_alias_v"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Mon, 12 Sep 2022 16:22:46 UTC
On Mon, Sep 12, 2022 at 9:47 AM Rainer Duffner <rainer@ultra-secure.de>
wrote:
> Hi,
>
> I have created a PR for this, but it has not attracted any attention from
> anybody.
>
> https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=266183
>
>
> Basically, I have a HP DL 380 Gen 10 Server with the following hardware:
>
> ses0: <HPE 12G SAS Exp Card 5.08>; ID: 51402ec010b61100
> Desc Dev Model Ident Size/Status
> - - - - Not Installed
> - da0 HP EG001200JWFVA 48D0A19BFQXE1815 1T
> - da1 HP EG001200JWFVA 48D0A1BTFQXE1815 1T
> - da2 HP EG001200JWFVA 48D0A1GGFQXE1815 1T
> - da3 HP EG001200JWFVA 48D0A1B6FQXE1815 1T
> - da4 HP EG001200JWFVA 48D0A1AGFQXE1815 1T
> - da5 HP EG001200JWFVA 48D0A1EQFQXE1815 1T
> - da6 HP EG001200JWFVA 48D0A1H2FQXE1815 1T
> - da7 HP EG001200JWFVA 48D0A1FMFQXE1815 1T
> - da8 HP EG001200JWJNQ WFK1F14Y 1T
> - da9 HP EG001200JWJNQ WFK248J7 1T
> - da10 HP EG001200JWJNQ WFK2MLXX 1T
> - da11 HP EG001200JWJNQ WFK2FRNL 1T
> - da12 HP EG001200JWJNQ WFK12X9N 1T
> - da13 HP EG001200JWJNQ WFK2LREQ 1T
> - da14 HP EG001200JWJNQ WFK2H5CH 1T
> - da15 HP EG001200JWJNQ WFK2ER85 1T
> - da16 HP EG001200JWJNQ WFK3JD0N 1T
> - da17 HP EG001200JWJNQ WFK3JBDM 1T
> - da18 HP EG001200JWJNQ WFK3JD8E 1T
> - da19 HP EG001200JWJNQ WFK3ES09 1T
> - da20 HP EG001200JWJNQ WFK3JCPY 1T
> - da21 HP EG001200JWJNQ WFK3JBDQ 1T
> - da22 HP EG001200JWJNQ WFK3JB3X 1T
> - da23 HP EG001200JWJNQ WFK3ERTQ 1T
> - - - - Not Installed
> - - - - Not Installed
> - - - - Not Installed
> - - - - Not Installed
>
> ses1: <HPE E208i-p SR Gen10 3.53>; ID: 51402ec011040770
> Desc Dev Model Ident Size/Status
> Internal Device - - - OK
>
> Temperatures: Controller Temperature Sensors : 69 C, emc_1464_int:0:7:Vendor defined : 44 C, emc_1464_ext1:1:1:Chip ASIC : 69 C, emc_1464_ext2:2:8:Vendor define : 58 C, emc_1464_ext3:3:6:Vendor define : 51 C
>
> ses2: <HPE D3710 5.04>; ID: 5001438041aad880
> Desc Dev Model Ident Size/Status
> {"Name":"Drive bay"} - - - Not Installed
> {"Name":"DriveBay1"} da24 HP EG001200JWJNQ WFK5DDT0 1T
> {"Name":"DriveBay2"} da25 HP EG001200JWJNQ WFK5FY2N 1T
> {"Name":"DriveBay3"} da26 HP EG001200JWJNQ WFK5JHPF 1T
> {"Name":"DriveBay4"} da27 HP EG001200JWJNQ WFK5FV96 1T
> {"Name":"DriveBay5"} da28 HP EG001200JWJNQ WFK5FV9P 1T
> {"Name":"DriveBay6"} da29 HP EG001200JWJNQ WFK5FWHX 1T
> {"Name":"DriveBay7"} da30 HP EG001200JWJNQ WFK5JH9R 1T
> {"Name":"DriveBay8"} da31 HP EG001200JWJNQ WFK5B2XA 1T
> {"Name":"DriveBay9"} da32 HP EG001200JWJNQ WFK72ZM9 1T
> {"Name":"DriveBay10"} da33 HP EG001200JWJNQ WFK6RNDD 1T
> {"Name":"DriveBay11"} da34 HP EG001200JWJNQ WFK72VXL 1T
> {"Name":"DriveBay12"} da35 HP EG001200JWJNQ WFK6RMHA 1T
> {"Name":"DriveBay13"} da36 HP EG001200JWJNQ WFK72ZLX 1T
> {"Name":"DriveBay14"} da37 HP EG001200JWJNQ WFK6S3ST 1T
> {"Name":"DriveBay15"} da38 HP EG001200JWJNQ WFK72ZH8 1T
> {"Name":"DriveBay16"} da39 HP EG001200JWJNQ WFK72H6S 1T
> {"Name":"DriveBay17"} da40 HP EG001200JWJNQ WFK7Y2H2 1T
> {"Name":"DriveBay18"} da41 HP EG001200JWJNQ WFK826HG 1T
> {"Name":"DriveBay19"} da42 HP EG001200JWJNQ WFK86CZM 1T
> {"Name":"DriveBay20"} da43 HP EG001200JWJNQ WFK89JCS 1T
> {"Name":"DriveBay21"} da44 HP EG001200JWJNQ WFK827M0 1T
> {"Name":"DriveBay22"} da45 HP EG001200JWJNQ WFK89LYY 1T
> {"Name":"DriveBay23"} da46 HP EG001200JWJNQ WFK7ZC2A 1T
> {"Name":"DriveBay24"} da47 HP EG001200JWJNQ WFK7Y2HJ 1T
> {"Name":"DriveBay25"} - - - Not Installed
>
> Temperatures: {"Name":"Temperature sensor"} : 46 C, {"Name":"LocalIoModule-Sensor[0]"} : 29 C, {"Name":"LocalIoModule-Sensor[1]"} : 29 C, {"Name":"LocalExpander-CpuSensor[0]"} : 46 C, {"Name":"PartnerIoModule-Sensor[0]"}: 29 C, {"Name":"PartnerIoModule-Sensor[1]"}: 30 C, {"Name":"PartnerExpander-CpuSensor[0]"} : 46 C, {"Name":"PowerSupply[1]-InletSensor[0]"}: 31 C, {"Name":"PowerSupply[1]-Sensor[0]"} : 36 C, {"Name":"PowerSupply[2]-InletSensor[0]"}: 29 C, {"Name":"PowerSupply[2]-Sensor[0]"} : 33 C, {"Name":"Backplane-Sensor[0]"} : 26 C, {"Name":"Backplane-Sensor[1]"} : 26 C, {"Name":"Backplane-Sensor[2]"} : 27 C, {"Name":"Backplane-Sensor[3]"} : 26 C, {"Name":"Backplane-Sensor[4]"} : 25 C
>
> ses3: <HPE P408e-p SR Gen10 3.53>; ID: 51402ec01361cce0
> Desc Dev Model Ident Size/Status
> Internal Device - - - OK
>
> Temperatures: Controller Temperature Sensors : 68 C, emc_1464_int:0:7:Vendor defined : 52 C, emc_1464_ext1:1:1:Chip ASIC : 68 C, emc_1464_ext2:2:8:Vendor define : 53 C, emc_1464_ext3:3:6:Vendor define : 58 C
>
> ses4: <HPE P408i-a SR Gen10 3.53>; ID: 51402ec010284310
> Desc Dev Model Ident Size/Status
> Internal Device - - - OK
> ArrayElement0000 da48 HP EG000300JWFVB 48B0A025FQVE1815 300G
> NoDrive000000001 - - - Not Installed
> ArrayElement0002 da49 HP EG000300JWFVB 48B0A015FQVE1815 300G
> NoDrive000000003 - - - Not Installed
>
> Temperatures: Controller Temperature Sensors : 58 C, emc_1464_int:0:7:Vendor defined : 48 C, emc_1464_ext1:1:1:Chip ASIC : 58 C, emc_1464_ext2:2:8:Vendor define : 48 C
>
>
>
> This works in 12.3, but when I upgraded to 13.1, it would panic at boot.
>
> panic: make_dev_alias_v: bad is_name (errror=22, si_name=enc0n5001438041aad8ba/type@0/slot@1/elmdesc@("Name": DriveBay1")/pass27
>
>
> The installer ISOs also panic, so it’s nothing on the disks.
>
>
>
> Who can address this?
>
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=264513 already addressed
this. you'll need to run
stable/13 I think to get the fix. I didn't see a fix for this in the EN
notices.
Or you need to back-port 5f438dd3acba47e54e63b13bfff31a49bcc6ddea. It
landed in stable/13 as
b3c8ab9ff9081748277906a348aff9d331c09092 and just adds a flag to an arg to
a call to make_dev_physpath_alias
to tell it not to panic.
Warner
Warner