Re: Boot hangs up with Alderlake's intel GbE NIC

From: Yasuhiro Kimura <yasu@FreeBSD.org>
Subject: Boot hangs up with Alderlake's intel GbE NIC
Date: Mon, 23 May 2022 16:44:02 +0900 (JST)

> Hello,
> 
> 2 months ago I updated my home server to Intel Alderlake Core i3 12100
> and GIGABYTE H610I DDR4 (rev. 1.0) motherboard.
> 
> The latter has onboard Intel GbE NIC. But unfortunately 13.0-RELEASE
> doesn't detect it. So I inserted Intel PCI-E GbE adaptor to the PCI-E
> slot of the motherbord and used it as network interface of the server.
> 
> And now 13.1-RELEASE is released. I tried updating with
> `freebsd-update update -r 13.1-RELEASE`, `freebsd install` and
> `shutdown -r now`. But after that system hangs up in the middle of
> boot.
> 
> At first boot stops after onboard Intel GbE NIC is detected.
> 
> https://people.freebsd.org/~yasu/Alderlake-GbE-boot-hangup.01.jpg
> 
> It keeps about a minute and then boot process resumes. But soon it
> stops again.
> 
> https://people.freebsd.org/~yasu/Alderlake-GbE-boot-hangup.02.jpg
> 
> I waited about 20 minites in this state but boot never go ahead.
> 
> Removing PCE-E GbE adopter doesn't change the situation.
> 
> I also tried boot image of 14.0-CURRENT 20220519 snapshot and boot
> hangs up just same as 13.1-RELEASE.
> 
> ---
> Yasuhiro Kimura
> 

I submitted the problem to Bugzilla.

Bug 264179 Boot hangs up with Alderlake's intel GbE NIC
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=264179

---
Yasuhiro Kimura