software watchdog RELENG13 not working ?

Was trying out some new hardware that does not seem to have a hardware
watchdog on it so was going to try the software one. However, after
starting up watchdogd -t 20 and then doing a killall -9 watchdogd, a
GENERIC kernel just prints the messages below and does not reboot.


Aug 23 15:40:35 alibox4port01 kernel: interrupt                   total
Aug 23 15:40:35 alibox4port01 kernel: cpu0:timer                        
21875
Aug 23 15:40:35 alibox4port01 kernel: cpu1:timer                        
11810
Aug 23 15:40:35 alibox4port01 kernel: cpu2:timer                        
10753
Aug 23 15:40:35 alibox4port01 kernel: cpu3:timer                        
10172
Aug 23 15:40:35 alibox4port01 kernel: irq128:
hdac0                          8
Aug 23 15:40:35 alibox4port01 kernel: irq129:
ahci0                       4004
Aug 23 15:40:35 alibox4port01 kernel: irq130:
igb0:rxq0                   3202
Aug 23 15:40:35 alibox4port01 kernel: irq131:
igb0:rxq1                     19
Aug 23 15:40:35 alibox4port01 kernel: irq132:
igb0:aq                        2
Aug 23 15:40:35 alibox4port01 kernel: irq142:
xhci0                        568
Aug 23 15:40:35 alibox4port01 kernel: Total                       62413
Aug 23 15:40:35 alibox4port01 kernel: KDB: stack backtrace:
Aug 23 15:40:35 alibox4port01 kernel: #0 0xffffffff80c70e05 at
kdb_backtrace+0x65
Aug 23 15:40:35 alibox4port01 kernel: #1 0xffffffff80bb4b0d at
hardclock+0x1bd
Aug 23 15:40:35 alibox4port01 kernel: #2 0xffffffff80bb5b74 at
handleevents+0xc4
Aug 23 15:40:35 alibox4port01 kernel: #3 0xffffffff80bb653c at timercb+0x25c
Aug 23 15:40:35 alibox4port01 kernel: #4 0xffffffff8116a3db at
lapic_handle_timer+0x9b
Aug 23 15:40:35 alibox4port01 kernel: #5 0xffffffff81083191 at
Xtimerint+0xb1
Aug 23 15:40:35 alibox4port01 kernel: #6 0xffffffff804e93ff at
acpi_cpu_idle+0x2ef
Aug 23 15:40:35 alibox4port01 kernel: #7 0xffffffff8106d90e at
cpu_idle_acpi+0x3e
Aug 23 15:40:35 alibox4port01 kernel: #8 0xffffffff8106d9bf at cpu_idle+0x9f
Aug 23 15:40:35 alibox4port01 kernel: #9 0xffffffff80c589c4 at
sched_idletd+0x2e4
Aug 23 15:40:35 alibox4port01 kernel: #10 0xffffffff80be02ea at
fork_exit+0x8a
Aug 23 15:40:35 alibox4port01 kernel: #11 0xffffffff810824ce at
fork_trampoline+0xe

Its just a stock GENERIC kernel and the box auto loaded the following klds

 # kldstat
Id Refs Address                Size Name
 1   44 0xffffffff80200000  1f19458 kernel
 2    1 0xffffffff8211a000   65b120 zfs.ko
 3    1 0xffffffff82776000     a010 cryptodev.ko
 4    1 0xffffffff82ae5000     3250 ichsmb.ko
 5    1 0xffffffff82ae9000     2180 smbus.ko
 6    1 0xffffffff82aec000     2340 uhid.ko
 7    1 0xffffffff82aef000     3380 usbhid.ko
 8    1 0xffffffff82af3000     31f8 hidbus.ko
 9    1 0xffffffff82af7000     3320 wmt.ko
10    1 0xffffffff82afb000     6360 u3g.ko
11    2 0xffffffff82b02000     4d90 ucom.ko
12    1 0xffffffff82b07000     5300 usie.ko

Kernel is from

13.0-STABLE FreeBSD 13.0-STABLE #1 stable/13-8ad5619ec: Fri Aug 20
13:15:51 EDT 2021

Chipset seems to be an Intel Gemini Lake. ICHWD doesnt attach to
anything unfortunately.

---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-STABLE #1 stable/13-8ad5619ec: Fri Aug 20 13:15:51 EDT 2021
   
mdtancsa@alibox4port01.sentex.ca:/usr/obj/usr/src/amd64.amd64/sys/GENERIC
amd64
FreeBSD clang version 12.0.1 (git@github.com:llvm/llvm-project.git
llvmorg-12.0.1-0-gfed41342a82f)
VT(efifb): resolution 800x600
CPU: Intel(R) Celeron(R) J4125 CPU @ 2.00GHz (1996.89-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x706a8  Family=0x6  Model=0x7a  Stepping=8
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 
Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended
Features=0x2294e287<FSGSBASE,TSCADJ,SGX,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA>
  Structured Extended Features2=0x40400004<UMIP,RDPID,SGXLC>
  Structured Extended
Features3=0xac000400<MD_CLEAR,IBPB,STIBP,ARCH_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8075411456 (7701 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL  GLK-SOC >
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 2 1 3
Timecounter "TSC" frequency 1996889148 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
mlx5en: Mellanox Ethernet driver 3.6.0 (December 2020)
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on
acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 550
Event timer "HPET1" frequency 19200000 Hz quality 440
Event timer "HPET2" frequency 19200000 Hz quality 440
Event timer "HPET3" frequency 19200000 Hz quality 440
Event timer "HPET4" frequency 19200000 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 3 range: 1 vs 1000000010000
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem
0xa0000000-0xa0ffffff,0x90000000-0x9fffffff irq 19 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Gemini Lake HDA Controller> mem
0xa1510000-0xa1513fff,0xa1000000-0xa10fffff irq 25 at device 14.0 on pci0
pci0: <simple comms> at device 15.0 (no driver attached)
ahci0: <Intel Gemini Lake AHCI SATA controller> port
0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem
0xa1514000-0xa1515fff,0xa1518000-0xa15180ff,0xa1517000-0xa15177ff irq 19
at device 18.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib1: <ACPI PCI-PCI bridge> irq 21 at device 19.0 on pci0
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) I211 (Copper)> port 0xe000-0xe01f mem
0xa1400000-0xa141ffff,0xa1420000-0xa1423fff irq 22 at device 0.0 on pci1
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 2 RX queues 2 TX queues
igb0: Using MSI-X interrupts with 3 vectors
igb0: Ethernet address: 00:f1:f3:1e:74:c6
igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 19.1 on pci0
pci2: <ACPI PCI bus> on pcib2
igb1: <Intel(R) I211 (Copper)> port 0xd000-0xd01f mem
0xa1300000-0xa131ffff,0xa1320000-0xa1323fff irq 23 at device 0.0 on pci2
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 2 RX queues 2 TX queues
igb1: Using MSI-X interrupts with 3 vectors
igb1: Ethernet address: 00:f1:f3:1e:74:c7
igb1: netmap queues/slots: TX 2/1024, RX 2/1024
pcib3: <ACPI PCI-PCI bridge> irq 21 at device 19.2 on pci0
pci3: <ACPI PCI bus> on pcib3
igb2: <Intel(R) I211 (Copper)> port 0xc000-0xc01f mem
0xa1200000-0xa121ffff,0xa1220000-0xa1223fff irq 20 at device 0.0 on pci3
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 2 RX queues 2 TX queues
igb2: Using MSI-X interrupts with 3 vectors
igb2: Ethernet address: 00:f1:f3:1e:74:c8
igb2: netmap queues/slots: TX 2/1024, RX 2/1024
pcib4: <ACPI PCI-PCI bridge> irq 21 at device 19.3 on pci0
pci4: <ACPI PCI bus> on pcib4
igb3: <Intel(R) I211 (Copper)> port 0xb000-0xb01f mem
0xa1100000-0xa111ffff,0xa1120000-0xa1123fff irq 21 at device 0.0 on pci4
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 2 RX queues 2 TX queues
igb3: Using MSI-X interrupts with 3 vectors
igb3: Ethernet address: 00:f1:f3:1e:74:c9
igb3: netmap queues/slots: TX 2/1024, RX 2/1024
pcib5: <ACPI PCI-PCI bridge> irq 22 at device 20.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 22 at device 20.1 on pci0
pci6: <ACPI PCI bus> on pcib6
xhci0: <Intel Gemini Lake USB 3.0 controller> mem 0xa1500000-0xa150ffff
irq 17 at device 21.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <Intel Gemini Lake HDA CODEC> at cad 2 on hdac0
hdaa0: <Intel Gemini Lake Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Gemini Lake (HDMI/DP 8ch)> at nid 3 on hdaa0
Trying to mount root from zfs:ali4root/ROOT/default []...
Root mount waiting for: CAM usbus0
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ShiJi 128GB U0104A0> ACS-2 ATA SATA 3.x device
ada0: Serial Number KC20210728170
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors)
uhub0: 16 ports with 16 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <USB USB Keykoard> at usbus0
ukbd0 on uhub0
ukbd0: <USB USB Keykoard, class 0/0, rev 1.10/1.10, addr 1> on usbus0
kbd2 at ukbd0
ugen0.3: <Sierra Wireless, Incorporated MC7700> at usbus0
ichsmb0: <Intel Gemini Lake SMBus controller> port 0xf040-0xf05f mem
0xa1516000-0xa15160ff irq 20 at device 31.1 on pci0
smbus0: <System Management Bus> on ichsmb0
lo0: link state changed to UP
igb0: link state changed to UP

isab0@pci0:0:31:0:      class=0x060100 rev=0x06 hdr=0x00 vendor=0x8086
device=0x31e8 subvendor=0x8086 subdevice=0x7270
    vendor     = 'Intel Corporation'
    device     = 'Celeron/Pentium Silver Processor LPC Controller'
    class      = bridge
    subclass   = PCI-ISA
ichsmb0@pci0:0:31:1:    class=0x0c0500 rev=0x06 hdr=0x00 vendor=0x8086
device=0x31d4 subvendor=0x8086 subdevice=0x7270
    vendor     = 'Intel Corporation'
    device     = 'Celeron/Pentium Silver Processor Gaussian Mixture Model'
    class      = serial bus
    subclass   = SMBus

none0@pci0:0:15:0:      class=0x078000 rev=0x06 hdr=0x00 vendor=0x8086
device=0x319a subvendor=0x8086 subdevice=0x7270
    vendor     = 'Intel Corporation'
    device     = 'Celeron/Pentium Silver Processor Trusted Execution
Engine Interface'
    class      = simple comms