Caught signal 6 (Abort trap). Server aborting
Date: Mon, 29 May 2023 03:20:31 UTC
i have success with xorg's vesa, then i install intel driver, it doesn't work, below is X log: [ 90.612] X.Org X Server 1.21.1.7 X Protocol Version 11, Revision 0 [ 90.612] Current Operating System: FreeBSD fbsd 13.2-RELEASE FreeBSD 13.2-RELEASE releng/13.2-n254617-525ecfdad597 GENERIC i386 [ 90.612] [ 90.612] Current version of pixman: 0.42.2 [ 90.612] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 90.612] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 90.613] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 29 03:09:03 2023 [ 90.629] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d" [ 90.633] (==) No Layout section. Using the first Screen section. [ 90.633] (==) No screen section available. Using defaults. [ 90.633] (**) |-->Screen "Default Screen Section" (0) [ 90.633] (**) | |-->Monitor "<default monitor>" [ 90.636] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 90.636] (==) Automatically adding devices [ 90.636] (==) Automatically enabling devices [ 90.636] (==) Not automatically adding GPU devices [ 90.637] (==) Automatically binding GPU devices [ 90.638] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 90.673] (==) FontPath set to: /usr/local/share/fonts/misc/, /usr/local/share/fonts/TTF/, /usr/local/share/fonts/OTF/, /usr/local/share/fonts/Type1/, /usr/local/share/fonts/100dpi/, /usr/local/share/fonts/75dpi/, catalogue:/usr/local/etc/X11/fontpath.d [ 90.673] (==) ModulePath set to "/usr/local/lib/xorg/modules" [ 90.673] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 90.675] (II) Module ABI versions: [ 90.675] X.Org ANSI C Emulation: 0.4 [ 90.675] X.Org Video Driver: 25.2 [ 90.675] X.Org XInput driver : 24.4 [ 90.675] X.Org Server Extension : 10.0 [ 90.686] (--) PCI:*(0@0:2:0) 8086:2a42:8086:2a42 rev 9, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000c080/8, BIOS @ 0x????????/65536 [ 90.686] (--) PCI: (0@0:2:1) 8086:2a43:8086:2a42 rev 9, Mem @ 0xfea00000/1048576 [ 90.688] (II) LoadModule: "glx" [ 90.692] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so [ 90.736] (II) Module glx: vendor="X.Org Foundation" [ 90.736] compiled for 1.21.1.7, module version = 1.0.0 [ 90.736] ABI class: X.Org Server Extension, version 10.0 [ 90.738] (==) Matched intel as autoconfigured driver 0 [ 90.738] (==) Matched modesetting as autoconfigured driver 1 [ 90.738] (==) Matched scfb as autoconfigured driver 2 [ 90.738] (==) Matched vesa as autoconfigured driver 3 [ 90.738] (==) Assigned the driver to the xf86ConfigLayout [ 90.738] (II) LoadModule: "intel" [ 90.740] (WW) Warning, couldn't open module intel [ 90.740] (EE) Failed to load module "intel" (module does not exist, 0) [ 90.740] (II) LoadModule: "modesetting" [ 90.740] (II) Loading /usr/local/lib/xorg/modules/drivers/modesetting_drv.so [ 90.764] (II) Module modesetting: vendor="X.Org Foundation" [ 90.764] compiled for 1.21.1.7, module version = 1.21.1 [ 90.764] Module class: X.Org Video Driver [ 90.764] ABI class: X.Org Video Driver, version 25.2 [ 90.766] (II) LoadModule: "scfb" [ 90.766] (II) Loading /usr/local/lib/xorg/modules/drivers/scfb_drv.so [ 90.768] (II) Module scfb: vendor="X.Org Foundation" [ 90.768] compiled for 1.21.1.7, module version = 0.0.5 [ 90.768] ABI class: X.Org Video Driver, version 25.2 [ 90.768] (II) LoadModule: "vesa" [ 90.768] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so [ 90.770] (II) Module vesa: vendor="X.Org Foundation" [ 90.770] compiled for 1.21.1.7, module version = 2.5.0 [ 90.770] Module class: X.Org Video Driver [ 90.770] ABI class: X.Org Video Driver, version 25.2 [ 90.771] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 90.771] (II) scfb: driver for wsdisplay framebuffer: scfb [ 90.771] (II) VESA: driver for VESA chipsets: vesa [ 90.771] (--) Using syscons driver with X support (version 2.0) [ 90.771] (--) using VT number 9 [ 90.802] (**) modeset(0): claimed PCI slot 0@0:2:0 [ 90.803] (II) modeset(0): using default device [ 90.803] (WW) Falling back to old probe method for scfb [ 90.803] scfb trace: probe start [ 90.803] scfb trace: probe done [ 90.803] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 90.803] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 90.804] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 90.804] (==) modeset(0): RGB weight 888 [ 90.804] (==) modeset(0): Default visual is TrueColor [ 90.804] (II) Loading sub module "glamoregl" [ 90.804] (II) LoadModule: "glamoregl" [ 90.804] (II) Loading /usr/local/lib/xorg/modules/libglamoregl.so [ 90.903] (II) Module glamoregl: vendor="X.Org Foundation" [ 90.903] compiled for 1.21.1.7, module version = 1.0.1 [ 90.904] ABI class: X.Org ANSI C Emulation, version 0.4 [ 93.029] (II) modeset(0): glamor X acceleration enabled on Mesa Mobile Intel® GM45 Express Chipset (CTG) [ 93.029] (II) modeset(0): glamor initialized [ 93.029] (==) modeset(0): VariableRefresh: disabled [ 93.029] (==) modeset(0): AsyncFlipSecondaries: disabled [ 93.059] (II) modeset(0): Output VGA-1 has no monitor section [ 93.060] (II) modeset(0): Output HDMI-1 has no monitor section [ 93.061] (II) modeset(0): Output DP-1 has no monitor section [ 93.093] (WW) EDID timing clock 85.50 exceeds claimed max 85MHz, fixing [ 93.093] (II) modeset(0): EDID for output VGA-1 [ 93.093] (II) modeset(0): Manufacturer: PHL Model: c07e Serial#: 21518 [ 93.093] (II) modeset(0): Year: 2014 Week: 41 [ 93.093] (II) modeset(0): EDID Version: 1.3 [ 93.093] (II) modeset(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 93.093] (II) modeset(0): Sync: Separate Composite SyncOnGreen [ 93.093] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 93.093] (II) modeset(0): Gamma: 2.20 [ 93.093] (II) modeset(0): DPMS capabilities: Off; RGB/Color Display [ 93.093] (II) modeset(0): First detailed timing is preferred mode [ 93.093] (II) modeset(0): redX: 0.638 redY: 0.333 greenX: 0.290 greenY: 0.591 [ 93.093] (II) modeset(0): blueX: 0.153 blueY: 0.082 whiteX: 0.312 whiteY: 0.329 [ 93.093] (II) modeset(0): Supported established timings: [ 93.094] (II) modeset(0): 720x400@70Hz [ 93.094] (II) modeset(0): 640x480@60Hz [ 93.094] (II) modeset(0): 800x600@60Hz [ 93.094] (II) modeset(0): 1024x768@60Hz [ 93.094] (II) modeset(0): Manufacturer's mask: 0 [ 93.094] (II) modeset(0): Supported detailed timing: [ 93.094] (II) modeset(0): clock: 85.5 MHz Image Size: 344 x 194 mm [ 93.094] (II) modeset(0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0 [ 93.094] (II) modeset(0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0 [ 93.094] (II) modeset(0): Serial No: UK51441021518 [ 93.094] (II) modeset(0): Monitor name: Philips 166VL [ 93.094] (II) modeset(0): Ranges: V min: 56 V max: 63 Hz, H min: 30 H max: 60 kHz, PixClock max 86 MHz [ 93.094] (II) modeset(0): EDID (in hex): [ 93.094] (II) modeset(0): 00ffffffffffff00410c7ec00e540000 [ 93.094] (II) modeset(0): 291801036e2213782a554da3554a9727 [ 93.094] (II) modeset(0): 154f54a1080001010101010101010101 [ 93.094] (II) modeset(0): 010101010101662156aa51001e30468f [ 93.094] (II) modeset(0): 330058c21000001e000000ff00554b35 [ 93.094] (II) modeset(0): 31343431303231353138000000fc0050 [ 93.094] (II) modeset(0): 68696c69707320313636564c000000fd [ 93.095] (II) modeset(0): 00383f1e3c08000a2020202020200063 [ 93.095] (II) modeset(0): Printing probed modes for output VGA-1 [ 93.095] (II) modeset(0): Modeline "1366x768"x59.8 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP) [ 93.095] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 93.095] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 93.095] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 93.095] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 93.096] (II) modeset(0): EDID for output HDMI-1 [ 93.096] (II) modeset(0): EDID for output DP-1 [ 93.096] (II) modeset(0): Output VGA-1 connected [ 93.096] (II) modeset(0): Output HDMI-1 disconnected [ 93.096] (II) modeset(0): Output DP-1 disconnected [ 93.096] (II) modeset(0): Using exact sizes for initial modes [ 93.096] (II) modeset(0): Output VGA-1 using initial mode 1366x768 +0+0 [ 93.097] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 93.097] (==) modeset(0): DPI set to (96, 96) [ 93.097] (II) Loading sub module "fb" [ 93.097] (II) LoadModule: "fb" [ 93.097] (II) Module "fb" already built-in [ 93.097] (II) UnloadModule: "scfb" [ 93.097] (II) Unloading scfb [ 93.097] (II) UnloadModule: "vesa" [ 93.097] (II) Unloading vesa [ 93.122] (EE) Fatal server error: [ 93.122] (EE) Caught signal 6 (Abort trap). Server aborting [ 93.122] (EE) [ 93.122] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 93.122] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 93.122] (EE) [ 93.123] (EE) Server terminated with error (1). Closing log file.