Re: How to determine the correct graphics card driver
- Reply: Graham Perrin : "NVIDIA: documentation (was: How to determine the correct graphics card driver)"
- Reply: Rocky Hotas : "Re: How to determine the correct graphics card driver"
- In reply to: Rocky Hotas : "How to determine the correct graphics card driver"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Sat, 16 Jul 2022 10:47:27 UTC
On Sat, 16 Jul 2022 at 11:22, Rocky Hotas <rockyhotas@post.com> wrote: > Hello! > After installing FreeBSD 13.1-RELEASE amd64 on an old machine with Intel > Pentium E5300, I would like to properly configure the graphics card. > Currently the display has a 640x480 resolution and I'm struggling to > find the right graphics driver. > > `pciconf -lv' shows: > > vgapci0@pci0:0:16:0: class=0x030000 rev=0xa2 hdr=0x00 vendor=0x10de > device=0x07e1 subvendor=0x1734 subdevice=0x115b > vendor = 'NVIDIA Corporation' > device = 'C73 [GeForce 7100 / nForce 630i]' > class = display > subclass = VGA > > So I guessed that it's an NVIDIA card. According to the link in Section > 2.1 of > > < > https://docs.freebsd.org/doc/7.3-RELEASE/usr/share/doc/en/articles/compiz-fusion/nvidia-setup.html > > > > (which is https://www.nvidia.com/en-us/drivers/unix/legacy-gpu/) > > such a device is supported by the `304.xx' driver. So, I installed the > package nvidia-driver-304-304.137_9 and added `kldlist="nvidia"' to > /etc/rc.conf as instructed. The driver installs in fact > `/boot/modules/nvidia.ko'. > > However, this had no success. The resolution is still 640x480. Some > relevant lines in the dmesg(8) possibly are: > > vtvga0: <VT VGA driver> > vgapci0: <VGA-compatible display> mem > 0xfd000000-0xfdffffff,0xe0000000-0xefffffff,0xfc000000-0xfcffffff irq 22 > at device 16.0 on pci0 > vgapci0: Boot video device > ... > linker_load_file: /boot/kernel/atanvidia.ko - unsupported file type > nvidia0: <GeForce 7100 / nForce 630i> on vgapci0 > vgapci0: child nvidia0 requested pci_enable_io > > Here are the full outputs > - of dmesg(8): http://rockyhotas.freeshell.org/dmesg1 > - of `pciconf -lv': http://rockyhotas.freeshell.org/pciconf1 > - of dmidecode(8): http://rockyhotas.freeshell.org/dmidecode1 > > First, is this the correct driver? And, if so, what is possibly wrong? > > Rocky > > The documentation link it’s from an old version, The current is: https://docs.freebsd.org/en/