From nobody Tue Aug 03 00:09:51 2021 X-Original-To: freebsd-ppc@mlmmj.nyi.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mlmmj.nyi.freebsd.org (Postfix) with ESMTP id CDBB112DDE66 for ; Tue, 3 Aug 2021 00:10:06 +0000 (UTC) (envelope-from al@datazap.net) Received: from mail-oi1-x264.google.com (mail-oi1-x264.google.com [IPv6:2607:f8b0:4864:20::264]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256 client-signature RSA-PSS (2048 bits) client-digest SHA256) (Client CN "smtp.gmail.com", Issuer "GTS CA 1O1" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 4GdwHK5LrPz3qZh for ; Tue, 3 Aug 2021 00:10:05 +0000 (UTC) (envelope-from al@datazap.net) Received: by mail-oi1-x264.google.com with SMTP id u10so26212026oiw.4 for ; Mon, 02 Aug 2021 17:10:05 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=datazap-net.20150623.gappssmtp.com; s=20150623; h=subject:to:cc:references:from:message-id :disposition-notification-to:date:user-agent:mime-version :in-reply-to:content-language; bh=0/FxB/qb54/DifIEvKR6uznnhK7NxJSWnnUsSGdZarM=; b=KXLJDR6YyUBUU0d3FB8G5GQLgFdLNg636Wcw8kC0lyETkOMFaP2j6P+0ALgcV8RUWi IYa8ECAbS6+6fky8PB8YK78HiQJ9LgEvOa7jjcbF4I9vhIoyEl59lmbOaasnSFWgCd9d 2zQwiQZkIFHFrzNQd3LM0YUvitJDzCPmtSFQ+FbNhZkTJB5e29IqeFcxkzmIgZgu7fnY z3cBJvqRIkCfG/s01/kjzJVkT+/9G5VTYbv0XJlJumLywtMe1CKmtp5WTCjLNjwxgDeQ tv/bo2ns7F2Vn06PzBmY2o5Zn3k2sTPE34byjrII0H0aPAbppEB9wPvz7mzzupjxMTtk pgig== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:subject:to:cc:references:from:message-id :disposition-notification-to:date:user-agent:mime-version :in-reply-to:content-language; bh=0/FxB/qb54/DifIEvKR6uznnhK7NxJSWnnUsSGdZarM=; b=S+MRjGgvSbfGM74+/gkOOsAvGdr3YFpo9Qu7YA50rzKgvnlPi8wC/4V9/YLbxMoVlC 4Hn9fpBWw8cPg3GUZsdNfvpkd5K0xDrw2yk+8OQrpdonapYZHP3Htk70ctxxtrhCEc1A uw8Oh1cVh2Ea9/al0fCF0prwZw9/FP4MM5h6vtw1F9xP7B/krIxGKHkWDjbI4qTQpVtv WgN6uX96ztMsVqGqnCefVjtFMWs9YyhGz7YKidvmqVbQ168XrTrmaHHtmin64hpUE9BB JkoDP/bm6SJfcRIasK9ALYj/DMRb8QRmTRXCkR0nAd/VD6fbWyfLLrBrlqSJOfzS0hnA gTcA== X-Gm-Message-State: AOAM5323ozdx0HzPb/O13CzfJhVUwdr4ErivZJKcXn5vAyHMcQ9N8SeA Ez+QGjLcNsMXF8SmxxfPpMcYmAd9nBTa2U7KhvFo31S18Xd/qg== X-Google-Smtp-Source: ABdhPJzIIETpJkkuq9yYchBlhOCQ1p/SqNww84dcUBWZjUg4tQtYNkH+qTGpSA0wPvnDRk643HsBjEXQZLCH X-Received: by 2002:a54:478e:: with SMTP id o14mr1186132oic.173.1627949398858; Mon, 02 Aug 2021 17:09:58 -0700 (PDT) Received: from agnus.datazap.net (agnus.datazap.net. [209.160.40.35]) by smtp-relay.gmail.com with ESMTP id v18sm3581846ote.6.2021.08.02.17.09.57; Mon, 02 Aug 2021 17:09:58 -0700 (PDT) X-Relaying-Domain: datazap.net Received: from [127.0.0.1] (localhost [127.0.0.1]) by agnus.datazap.net (Postfix) with ESMTP id 8E83AB794B; Mon, 2 Aug 2021 20:09:51 -0400 (EDT) Subject: Re: yet another error To: Justin Hibbits Cc: "freebsd-ppc@freebsd.org" , Justin Hibbits References: <6c7eadc4-ccc5-0da0-0ae4-69fa2caf48b6@datazap.net> <20210801154817.62f57168@ralga-linux> From: Al Message-ID: <404a1b33-12e8-3b5f-341a-29322e17779c@datazap.net> Disposition-Notification-To: Al Date: Mon, 2 Aug 2021 20:09:51 -0400 User-Agent: Mozilla/5.0 (X11; Linux ppc64; rv:52.0) Gecko/20100101 Thunderbird/52.2.1 List-Id: Porting FreeBSD to the PowerPC List-Archive: https://lists.freebsd.org/archives/freebsd-ppc List-Help: List-Post: List-Subscribe: List-Unsubscribe: Sender: owner-freebsd-ppc@freebsd.org X-BeenThere: freebsd-ppc@freebsd.org MIME-Version: 1.0 In-Reply-To: <20210801154817.62f57168@ralga-linux> Content-Type: multipart/alternative; boundary="------------11BF639CA98BC9D954391D21" Content-Language: en-US X-Rspamd-Queue-Id: 4GdwHK5LrPz3qZh X-Spamd-Bar: --- Authentication-Results: mx1.freebsd.org; dkim=pass header.d=datazap-net.20150623.gappssmtp.com header.s=20150623 header.b=KXLJDR6Y; dmarc=none; spf=none (mx1.freebsd.org: domain of al@datazap.net has no SPF policy when checking 2607:f8b0:4864:20::264) smtp.mailfrom=al@datazap.net X-Spamd-Result: default: False [-3.30 / 15.00]; TO_DN_EQ_ADDR_SOME(0.00)[]; ARC_NA(0.00)[]; R_DKIM_ALLOW(-0.20)[datazap-net.20150623.gappssmtp.com:s=20150623]; NEURAL_HAM_MEDIUM(-1.00)[-1.000]; FROM_HAS_DN(0.00)[]; RCPT_COUNT_THREE(0.00)[3]; TO_DN_SOME(0.00)[]; NEURAL_HAM_LONG(-1.00)[-1.000]; MIME_GOOD(-0.10)[multipart/alternative,text/plain]; PREVIOUSLY_DELIVERED(0.00)[freebsd-ppc@freebsd.org]; DMARC_NA(0.00)[datazap.net]; RCVD_COUNT_THREE(0.00)[4]; TO_MATCH_ENVRCPT_SOME(0.00)[]; DKIM_TRACE(0.00)[datazap-net.20150623.gappssmtp.com:+]; NEURAL_HAM_SHORT(-1.00)[-1.000]; RCVD_IN_DNSWL_NONE(0.00)[2607:f8b0:4864:20::264:from]; R_SPF_NA(0.00)[no SPF record]; FROM_EQ_ENVFROM(0.00)[]; MIME_TRACE(0.00)[0:+,1:+,2:~]; RCVD_TLS_LAST(0.00)[]; ASN(0.00)[asn:15169, ipnet:2607:f8b0::/32, country:US]; FREEMAIL_CC(0.00)[freebsd.org,gmail.com]; MID_RHS_MATCH_FROM(0.00)[] X-ThisMailContainsUnwantedMimeParts: Y This is a multi-part message in MIME format. --------------11BF639CA98BC9D954391D21 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Hello, On 01/08/21 16:48, Justin Hibbits wrote: > On Sun, 1 Aug 2021 15:31:30 -0400 > Al wrote: > >> Hello, >> >> It is loading the kernel now, but there is a USB error: >> >> U-Boot 2014.04 (Oct 17 2016 - 08:22:22) >> >> CPU0: P5020, Version: 2.0, (0x82200020) >> Core: e5500, Version: 1.2, (0x80240012) >> Clock Configuration: >> CPU0:1995 MHz, CPU1:1995 MHz, >> CCB:798 MHz, >> DDR:665 MHz (1330 MT/s data rate) (Asynchronous), LBC:49.875 >> MHz FMAN1: 498.750 MHz >> QMAN: 399 MHz >> PME: 399 MHz >> L1: D-cache 32 KiB enabled >> I-cache 32 KiB enabled >> Reset Configuration Word (RCW): >> 00000000: 0c540000 00000000 1e1e0000 00000000 >> 00000010: 44808c00 ff002000 68000000 45000000 >> 00000020: 00000000 00000000 00000000 0003000f >> 00000030: a0000000 00000000 00000000 00000000 >> Board: CYRUS >> 36-bit Addressing >> I2C: ready >> SPI: ready >> DRAM: Initializing....using SPD >> Detected UDIMM KHX1600C10D3/8G >> Detected UDIMM KHX1600C10D3/8G >> 14 GiB left unmapped >> 16 GiB (DDR3, 64-bit, CL=9, ECC off) >> DDR Controller Interleaving Mode: cache line >> DDR Chip-Select Interleaving Mode: CS0+CS1 >> >> Local Bus Controller Registers >> BR0 0xE0001001 OR0 0xFFF00010 >> BR1 0xE1001001 OR1 0xFFF00010 >> BR2 0x00000000 OR2 0x00000000 >> BR3 0x00000000 OR3 0x00000000 >> BR4 0x00000000 OR4 0x00000000 >> BR5 0x00000000 OR5 0x00000000 >> BR6 0x00000000 OR6 0x00000000 >> BR7 0x00000000 OR7 0x00000000 >> LBCR 0x40000000 LCRR 0x80010004 >> L2: 512 KiB enabled >> Corenet Platform Cache: 2 MiB enabled >> SERDES: bank 2 disabled >> MMC: FSL_SDHC: 0 >> EEPROM: NXID v0 >> PCIe1: Root Complex, x4 gen1, regs @ 0xfe200000 >> 01:00.0 - 1002:6759 - Display controller >> 01:00.1 - 1002:aa90 - Multimedia device >> PCIe1: Bus 00 - 01 >> PCIe2: Root Complex, x4 gen2, regs @ 0xfe201000 >> 03:00.0 - 111d:8092 - Bridge device >> 04:01.0 - 111d:8092 - Bridge device >> 05:00.0 - 12d8:e111 - Bridge device >> 04:02.0 - 111d:8092 - Bridge device >> 04:03.0 - 111d:8092 - Bridge device >> 08:00.0 - 8086:10d3 - Network controller >> 04:08.0 - 111d:8092 - Bridge device >> 04:10.0 - 111d:8092 - Bridge device >> PCIe2: Bus 02 - 0a >> PCIe3: disabled >> PCIe4: disabled >> Looking for VGA >> PINS: 0xfc000808 >> videoboot: Booting PCI video card bus 1, function 0, device 0 >> Begin BIOS POST >> End BIOS POST >> Setting VESA Mode >> Found required VESA mode >> About to set mode 279 >> About to get mode >> Got mode 49431 (0xc117) >> OK >> XSize = 1024 YSize = 768 Base =0xe0000000 >> mmio_base = 0x80000000 >> bgx = 0xad55ad55 fgx = 0x0 >> In: serial >> Out: serial >> Err: serial >> ID: NXID v0 >> SN: 116330081 >> UID: 4429431001910051c47da080a0800000 >> Errata: Q >> Build date: 2015/07/06 14:51:17 >> CRC: eb5fb57a >> SCSI: scanning bus for devices... >> Found 0 device(s). >> Net: Initializing Fman >> >> MMC read: dev # 0, block # 1130, count 128 ... >> Fman1: Uploading microcode version 106.1.0 >> Tuning PHY @ 3 >> Tuning PHY @ 7 >> FM1@DTSEC4 [PRIME], FM1@DTSEC5 >> >> MMC read: dev # 0, block # 1280, count 512 ... 512 blocks read: OK >> >> MMC read: dev # 0, block # 65536, count 131072 ... 131072 blocks >> read: OK USB0: USB EHCI 1.00 >> scanning bus 0 for devices... ERROR: Invalid USB EP length (9) >> Hit [Enter] to boot immediately, or any other key for command prompt. >> Booting [/boot/kernel/kernel]... >> Using DTB provided by U-Boot at address 0xc00000. >> Kernel args: (null)devices... 4 USB Device(s) found >> GDB: no debug ports present >> KDB: debugger backends: ddb >> KDB: current backend: ddb.. >> ---<>---(s). >> Copyright (c) 1992-2021 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, >> 1994 >> X5000> fThe Regents of the University of California. All rights >> X5000> reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 14.0-CURRENT #4 main-n248384-d0d631d5f44: Fri Jul 30 18:08:34 >> EDT 2021 >> >> al@test.imagehostplus.com:/usr/obj/usr/src/powerpc.powerpc64/sys/AMIGAX5000 >> powerpc >> FreeBSD clang version 11.0.0 (git@github.com:llvm/llvm-project.git >> llvmorg-11.0.0-0-g176249bd673) >> VT: init without driver.s (2 MiB/s) >> cpu0: Freescale e5500 core revision 1.2, 1995.00 MHz >> cpu0: Features cc009100 >> cpu0: Features2 8000000 >> cpu0: HID0 c0000000... >> real memory = 16570585088 (15802 MB) >> avail memory = 16520658944 (15755 MB) @0x7fe2efd8 >> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs >> arc4random: WARNING: initial seeding bypassed the cryptographic >> random device because it was not yet seeded and the knob >> 'bypass_before_seedi. random: entropy device external >> interfacegehostplus.com) kbd0 at kbdmux0 >> ofwbus0: on nexus0 >> simplebus0: on ofwbus0 >> bman-portals0: on ofwbus0 >> qman-portals0: on ofwbus0 >> simplebus1: mem >> 0xffe000000-0xffe000fff on ofwbus0 >> fman0: mem 0x400000-0x4fffff irq 96,16 on >> simplebus1 >>> INFO (__ERR_MODULE__) [CPU00, >> /usr/src/sys/contrib/ncsw/Peripherals/FM/fm_ncsw.c:470 >> LoadFmanCtrlCode]: FMan-Controller code (ver 101.0.8) . >> fman0: Hardware version: 3.0. >> rcpm0: mem 0xe2000-0xe2fff >> on simplebus1 >> lbc0: mem 0xffe124000-0xffe124fff >> irq 25 on ofwbus0 >> pcib0: mem >> 0xffe200000-0xffe200fff irq 16 on ofwbus0 >> pci0: on pcib0 >> pcib1: irq 16 at device 0.0 numa-domain >> 0 on pci0 >> pci1: numa-domain 0 on pcib1 >> pcib2: mem >> 0xffe201000-0xffe201fff irq 16 on ofwbus0 >> pci2: on pcib2 >> pcib3: irq 16 at device 0.0 numa-domain >> 0 on pci2 >> pci3: numa-domain 0 on pcib3 >> pcib4: at device 0.0 numa-domain 0 on pci3 >> pci4: numa-domain 0 on pcib4 >> pcib5: at device 1.0 numa-domain 0 on pci4 >> pci5: numa-domain 0 on pcib5 >> pcib6: irq 5 at device 0.0 numa-domain 0 on pci5 >> pcib6: allocating 1 bus failed >> pcib6: allocating 1 bus failed >> pcib6: failed to allocate initial memory window: 0-0xfffff >> pcib2: failed to reserve resource for pcib3 >> pcib6: failed to allocate initial prefetch window: 0-0xfffff >> pcib7: at device 2.0 numa-domain 0 on pci4 >> pci6: numa-domain 0 on pcib7 >> pcib8: at device 3.0 numa-domain 0 on pci4 >> pci7: numa-domain 0 on pcib8 >> pcib9: at device 8.0 numa-domain 0 on pci4 >> pci8: numa-domain 0 on pcib9 >> pcib10: at device 16.0 numa-domain 0 on pci4 >> pci9: numa-domain 0 on pcib10 >> gpio0: mem 0x130000-0x130fff irq 55 on >> simplebus1 >> gpiobus0: on gpio0 >> openpic0: mem 0x40000-0x7ffff on >> simplebus1 fsl_msi0: mem >> 0x41600-0x417ff,0x44140-0x44143 irq 224,225,226,227,228,229,230,231 >> on simplebus1 fsl_msi1: mem >> 0x41800-0x419ff,0x45140-0x45143 irq 232,233,234,235,236,237,238,239 >> on simplebus1 fsl_msi2: mem >> 0x41a00-0x41bff,0x46140-0x46143 irq 240,241,242,243,244,245,246,247 >> on simplebus1 qman0: mem 0x318000-0x318fff >> irq 16 on simplebus1 qman0: Hardware version: 1.2. >> bman0: mem 0x31a000-0x31afff irq 16 on >> simplebus1 >> bman0: Hardware version: 1.0. >> cpulist0: on ofwbus0 >> cpu0: on cpulist0 >> cpu1: on cpulist0 >> spi0: mem 0x110000-0x110fff irq 53 on >> simplebus1 >> spibus0: on spi0 >> iichb0: mem 0x118100-0x1181ff irq 38 on >> simplebus1 iicbus0: on iichb0 >> iic0: on iicbus0 >> iichb1: mem 0x119100-0x1191ff irq 39 on >> simplebus1 iicbus1: on iichb1 >> iic1: on iicbus1 >> ds13070: at addr 0xde on iicbus1 >> pq_mdio0: mem 0xe1120-0xe1fff irq 100 on fman0 >> dtsec0: mem >> 0xe6000-0xe6fff on fman0 >> dtsec0: Configured for regular mode. >> miibus0: on dtsec0 >> micphy0: PHY 3 on miibus0 >> micphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, >> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto >> dtsec0: Ethernet address: 00:80:10:fa:ce:01 >> dtsec1: mem >> 0xe8000-0xe8fff on fman0 >> dtsec1: Configured for regular mode. >> miibus1: on dtsec1 >> micphy1: PHY 7 on miibus1 >> micphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, >> 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto >> dtsec1: Ethernet address: 00:80:10:fa:ce:02 >> dtsec2: mem >> 0xe0000-0xe0fff on fman0 >> dtsec2: Could not load local-mac-addr property from DTS >> device_attach: dtsec2 attach returned 6 >> dtsec2: mem >> 0xe2000-0xe2fff on fman0 >> dtsec2: Could not load local-mac-addr property from DTS >> device_attach: dtsec2 attach returned 6 >> pq_mdio1: mem 0xe3120-0xe3fff on fman0 >> dtsec2: mem >> 0xe4000-0xe4fff on fman0 >> dtsec2: Could not load local-mac-addr property from DTS >> device_attach: dtsec2 attach returned 6 >> pq_mdio2: mem 0xe5120-0xe5fff on fman0 >> pq_mdio3: mem 0xe7120-0xe7fff on fman0 >> pq_mdio4: mem 0xe9120-0xe9fff on fman0 >> dtsec2: mem >> 0xf0000-0xf0fff on fman0 >> dtsec2: Could not load local-mac-addr property from DTS >> device_attach: dtsec2 attach returned 6 >> sdhci_fsl0: mem 0x114000-0x114fff irq 48 >> on simplebus1 >> mmc0: on sdhci_fsl0 >> iichb2: mem 0x118000-0x1180ff irq 38 on >> simplebus1 iicbus2: on iichb2 >> iic2: on iicbus2 >> iichb3: mem 0x119000-0x1190ff irq 39 on >> simplebus1 iicbus3: on iichb3 >> iic3: on iicbus3 >> uart0: <16550 or compatible> mem 0x11c500-0x11c5ff irq 36 on >> simplebus1 uart0: console (115451,n,8,1) >> uart1: <16550 or compatible> mem 0x11c600-0x11c6ff irq 36 on >> simplebus1 uart2: <16550 or compatible> mem 0x11d500-0x11d5ff irq 37 >> on simplebus1 uart3: <16550 or compatible> mem 0x11d600-0x11d6ff irq >> 37 on simplebus1 gpioc0: on gpio0 >> ehci0: mem 0x210000-0x210fff >> irq 44 on simplebus1 >> usbus0: EHCI version 1.0 >> usbus0 on ehci0 >> ehci1: mem 0x211000-0x211fff >> irq 45 on simplebus1 >> usbus1: EHCI version 1.0 >> usbus1 on ehci1 >> fslsata0: mem >> 0x220000-0x220fff irq 68 on simplebus1 >> fslsata1: mem >> 0x221000-0x221fff irq 69 on simplebus1 >> vgapci0: at device 0.0 numa-domain 0 on pci1 >> pci1: at device 0.1 (no driver attached) >> em0: irq 7 at device 0.0 numa-domain 0 >> on pci7 em0: Using 1024 TX descriptors and 1024 RX descriptors >> em0: Using 2 RX queues 2 TX queues >> em0: Using MSI-X interrupts with 3 vectors >> em0: Ethernet address: 68:05:ca:24:42:f7 >> gpiopower0: on ofwbus0 >> gpiopower1: on ofwbus0 >> Timecounter "timebase" frequency 24937500 Hz quality 1000 >> Event timer "decrementer" frequency 24937500 Hz quality 1000 >> Timecounters tick every 1.000 msec >> ds13070: registered as a time-of-day clock, resolution 1.000000s >> usbus0: 480Mbps High Speed USB v2.0 >> usbus1: 480Mbps High Speed USB v2.0 >> ugen0.1: at usbus0 >> uhub0 on usbus0 >> uhub0: on >> usbus0 >> ugen1.1: at usbus1 >> uhub1 on usbus1 >> uhub1: on >> usbus1 >> uhub0: 1 port with 1 removable, self powered >> uhub1: 1 port with 1 removable, self powered >> mmcsd0: 4GB at >> mmc0 49.8MHz/4bit/65535-block >> Launching APs: 1 >> ada0 at fslsata0 bus 0 scbus0 target 0 lun 0 >> ada0: ACS-2 ATA SATA 3.x device >> ada0: Serial Number 191078805013 >> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) >> ada0: Command Queueing enabled >> ada0: 228944MB (468877312 512 byte sectors) >> Trying to mount root from ufs:/dev/ada0s2a [rw]... >> random: unblocking device. >> ugen0.2: at usbus0 >> uhub2 on uhub0 >> uhub2: > 2> on usbus0 >> uhub2: MTT enabled >> ugen1.2: at usbus1 >> uhub3 on uhub1 >> uhub3: > 2> on usbus1 >> uhub3: MTT enabled >> uhub2: 4 ports with 4 removable, self powered >> uhub3: 4 ports with 4 removable, self powered >> ugen0.3: at usbus0 >> ugen1.3: at usbus1 >> ukbd0 on uhub3 >> ukbd0: >> on usbus1 >> kbd1 at ukbd0 >> ugen1.4: at usbus1 >> ums0 on uhub3 >> ums0: > addr 4> on usbus1 >> ums0: 3 buttons and [XYZ] coordinates ID=0 >> ugen0.4: at usbus0 >> ugen1.4: at usbus1 (disconnected) >> ums0: at uhub3, port 2, addr 4 (disconnected) >> ums0: detached >> ugen1.4: at usbus1 >> ums0 on uhub3 >> ums0: > addr 4> on usbus1 >> ums0: 3 buttons and [XYZ] coordinates ID=0 >> ugen1.4: at usbus1 (disconnected) >> ums0: at uhub3, port 2, addr 4 (disconnected) >> ums0: detached >> ugen1.4: at usbus1 >> ums0 on uhub3 >> ums0: > addr 4> on usbus1 >> ums0: 3 buttons and [XYZ] coordinates ID=0 >> ugen1.4: at usbus1 (disconnected) >> ums0: at uhub3, port 2, addr 4 (disconnected) >> ums0: detached >> ugen1.4: at usbus1 >> ums0 on uhub3 >> ums0: > addr 4> on usbus1 >> ums0: 3 buttons and [XYZ] coordinates ID=0 >> >> >> I believe the issue starts here: scanning bus 0 for devices... ERROR: >> Invalid USB EP length (9) > This error is before the kernel, and happens either in the loader or > U-Boot, most likely U-Boot. Do you have a USB hub attached? Try to > remove that. Try removing anything that's not a mouse or keyboard. I don't have a USB hub. I unplugged everything USB. I even unplugged the internal usb connector, thinking the case may have the hub. I then removed all the cards except the video card. This is the results: U-Boot 2014.04 (Oct 17 2016 - 08:22:22) CPU0: P5020, Version: 2.0, (0x82200020) Core: e5500, Version: 1.2, (0x80240012) Clock Configuration: CPU0:1995 MHz, CPU1:1995 MHz, CCB:798 MHz, DDR:665 MHz (1330 MT/s data rate) (Asynchronous), LBC:49.875 MHz FMAN1: 498.750 MHz QMAN: 399 MHz PME: 399 MHz L1: D-cache 32 KiB enabled I-cache 32 KiB enabled Reset Configuration Word (RCW): 00000000: 0c540000 00000000 1e1e0000 00000000 00000010: 44808c00 ff002000 68000000 45000000 00000020: 00000000 00000000 00000000 0003000f 00000030: a0000000 00000000 00000000 00000000 Board: CYRUS 36-bit Addressing I2C: ready SPI: ready DRAM: Initializing....using SPD Detected UDIMM KHX1600C10D3/8G Detected UDIMM KHX1600C10D3/8G 14 GiB left unmapped 16 GiB (DDR3, 64-bit, CL=9, ECC off) DDR Controller Interleaving Mode: cache line DDR Chip-Select Interleaving Mode: CS0+CS1 Local Bus Controller Registers BR0 0xE0001001 OR0 0xFFF00010 BR1 0xE1001001 OR1 0xFFF00010 BR2 0x00000000 OR2 0x00000000 BR3 0x00000000 OR3 0x00000000 BR4 0x00000000 OR4 0x00000000 BR5 0x00000000 OR5 0x00000000 BR6 0x00000000 OR6 0x00000000 BR7 0x00000000 OR7 0x00000000 LBCR 0x40000000 LCRR 0x80010004 L2: 512 KiB enabled Corenet Platform Cache: 2 MiB enabled SERDES: bank 2 disabled MMC: FSL_SDHC: 0 EEPROM: NXID v0 PCIe1: Root Complex, x4 gen1, regs @ 0xfe200000 01:00.0 - 1002:6759 - Display controller 01:00.1 - 1002:aa90 - Multimedia device PCIe1: Bus 00 - 01 PCIe2: Root Complex, x4 gen2, regs @ 0xfe201000 03:00.0 - 111d:8092 - Bridge device 04:01.0 - 111d:8092 - Bridge device 05:00.0 - 12d8:e111 - Bridge device 04:02.0 - 111d:8092 - Bridge device 04:03.0 - 111d:8092 - Bridge device 04:08.0 - 111d:8092 - Bridge device 04:10.0 - 111d:8092 - Bridge device PCIe2: Bus 02 - 0a PCIe3: disabled PCIe4: disabled Looking for VGA PINS: 0xfc000808 videoboot: Booting PCI video card bus 1, function 0, device 0 Begin BIOS POST End BIOS POST Setting VESA Mode Found required VESA mode About to set mode 279 About to get mode Got mode 49431 (0xc117) OK XSize = 1024 YSize = 768 Base =0xe0000000 mmio_base = 0x80000000 bgx = 0xad55ad55 fgx = 0x0 In: serial Out: serial Err: serial ID: NXID v0 SN: 116330081 UID: 4429431001910051c47da080a0800000 Errata: Q Build date: 2015/07/06 14:51:17 CRC: eb5fb57a SCSI: scanning bus for devices... Found 0 device(s). Net: Initializing Fman MMC read: dev # 0, block # 1130, count 128 ... Fman1: Uploading microcode version 106.1.0 Tuning PHY @ 3 Tuning PHY @ 7 FM1@DTSEC4 [PRIME], FM1@DTSEC5 MMC read: dev # 0, block # 1280, count 512 ... 512 blocks read: OK MMC read: dev # 0, block # 65536, count 131072 ... 131072 blocks read: OK Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... ound Using DTB provided by U-Boot at address 0xc00000. Kernel args: (null)devices... 2 USB Device(s) found GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb.. ---<>---(s). Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 X5000> fThe Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.0-CURRENT #5 main-n246715-b2ee069e8cf: Mon Aug 2 00:38:04 EDT 2021 al@test.imagehostplus.com:/usr/obj/usr/src/powerpc.powerpc64/sys/AMIGAX5000 powerpc FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe) VT: init without driver.s (2.1 MiB/s) cpu0: Freescale e5500 core revision 1.2, 1995.00 MHz cpu0: Features cc009100 cpu0: Features2 8000000 cpu0: HID0 c0000000... real memory = 16570585088 (15802 MB) avail memory = 16520663040 (15755 MB) @0x7fe2efd8 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seedi. random: entropy device external interfacegehostplus.com) WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0. kbd0 at kbdmux0t devices: 4 WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 14.0. ofwbus0: on nexus0 simplebus0: on ofwbus0 bman-portals0: on ofwbus0 qman-portals0: on ofwbus0 simplebus1: mem 0xffe000000-0xffe000fff on ofwbus0 fman0: mem 0x400000-0x4fffff irq 96,16 on simplebus1 > INFO (__ERR_MODULE__) [CPU00, /usr/src/sys/contrib/ncsw/Peripherals/FM/fm_ncsw.c:470 LoadFmanCtrlCode]: FMan-Controller code (ver 101.0.8) . fman0: Hardware version: 3.0. rcpm0: mem 0xe2000-0xe2fff on simplebus1 lbc0: mem 0xffe124000-0xffe124fff irq 25 on ofwbus0 pcib0: mem 0xffe200000-0xffe200fff irq 16 on ofwbus0 pci0: on pcib0 pcib1: irq 16 at device 0.0 numa-domain 0 on pci0 pci1: numa-domain 0 on pcib1 pcib2: mem 0xffe201000-0xffe201fff irq 16 on ofwbus0 pci2: on pcib2 pcib3: irq 16 at device 0.0 numa-domain 0 on pci2 pci3: numa-domain 0 on pcib3 pcib4: at device 0.0 numa-domain 0 on pci3 pci4: numa-domain 0 on pcib4 pcib5: at device 1.0 numa-domain 0 on pci4 pci5: numa-domain 0 on pcib5 pcib6: irq 5 at device 0.0 numa-domain 0 on pci5 pcib6: allocating 1 bus failed pcib6: allocating 1 bus failed pcib2: failed to reserve resource for pcib3 pcib6: failed to allocate initial memory window: 0-0xfffff pcib2: failed to reserve resource for pcib3 pcib2: failed to reserve resource for pcib3 pcib2: failed to reserve resource for pcib3 pcib2: failed to reserve resource for pcib3 pcib6: failed to allocate initial prefetch window: 0-0xfffff pcib7: at device 2.0 numa-domain 0 on pci4 pci6: numa-domain 0 on pcib7 pcib8: at device 3.0 numa-domain 0 on pci4 pci7: numa-domain 0 on pcib8 pcib9: at device 8.0 numa-domain 0 on pci4 pci8: numa-domain 0 on pcib9 pcib10: at device 16.0 numa-domain 0 on pci4 pci9: numa-domain 0 on pcib10 gpio0: mem 0x130000-0x130fff irq 55 on simplebus1 gpiobus0: on gpio0 openpic0: mem 0x40000-0x7ffff on simplebus1 fsl_msi0: mem 0x41600-0x417ff,0x44140-0x44143 irq 224,225,226,227,228,229,230,231 on simplebus1 fsl_msi1: mem 0x41800-0x419ff,0x45140-0x45143 irq 232,233,234,235,236,237,238,239 on simplebus1 fsl_msi2: mem 0x41a00-0x41bff,0x46140-0x46143 irq 240,241,242,243,244,245,246,247 on simplebus1 qman0: mem 0x318000-0x318fff irq 16 on simplebus1 qman0: Hardware version: 1.2. bman0: mem 0x31a000-0x31afff irq 16 on simplebus1 bman0: Hardware version: 1.0. cpulist0: on ofwbus0 cpu0: on cpulist0 cpu1: on cpulist0 spi0: mem 0x110000-0x110fff irq 53 on simplebus1 spibus0: on spi0 iichb0: mem 0x118100-0x1181ff irq 38 on simplebus1 iicbus0: on iichb0 iic0: on iicbus0 iichb1: mem 0x119100-0x1191ff irq 39 on simplebus1 iicbus1: on iichb1 iic1: on iicbus1 ds13070: at addr 0xde on iicbus1 pq_mdio0: mem 0xe1120-0xe1fff irq 100 on fman0 dtsec0: mem 0xe6000-0xe6fff on fman0 dtsec0: Configured for regular mode. miibus0: on dtsec0 micphy0: PHY 3 on miibus0 micphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto dtsec0: Ethernet address: 00:80:10:fa:ce:01 dtsec1: mem 0xe8000-0xe8fff on fman0 dtsec1: Configured for regular mode. miibus1: on dtsec1 micphy1: PHY 7 on miibus1 micphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto dtsec1: Ethernet address: 00:80:10:fa:ce:02 dtsec2: mem 0xe0000-0xe0fff on fman0 dtsec2: Could not load local-mac-addr property from DTS device_attach: dtsec2 attach returned 6 dtsec2: mem 0xe2000-0xe2fff on fman0 dtsec2: Could not load local-mac-addr property from DTS device_attach: dtsec2 attach returned 6 pq_mdio1: mem 0xe3120-0xe3fff on fman0 dtsec2: mem 0xe4000-0xe4fff on fman0 dtsec2: Could not load local-mac-addr property from DTS device_attach: dtsec2 attach returned 6 pq_mdio2: mem 0xe5120-0xe5fff on fman0 pq_mdio3: mem 0xe7120-0xe7fff on fman0 pq_mdio4: mem 0xe9120-0xe9fff on fman0 dtsec2: mem 0xf0000-0xf0fff on fman0 dtsec2: Could not load local-mac-addr property from DTS device_attach: dtsec2 attach returned 6 sdhci_fsl0: mem 0x114000-0x114fff irq 48 on simplebus1 mmc0: on sdhci_fsl0 iichb2: mem 0x118000-0x1180ff irq 38 on simplebus1 iicbus2: on iichb2 iic2: on iicbus2 iichb3: mem 0x119000-0x1190ff irq 39 on simplebus1 iicbus3: on iichb3 iic3: on iicbus3 uart0: <16550 or compatible> mem 0x11c500-0x11c5ff irq 36 on simplebus1 uart0: console (115451,n,8,1) uart1: <16550 or compatible> mem 0x11c600-0x11c6ff irq 36 on simplebus1 uart2: <16550 or compatible> mem 0x11d500-0x11d5ff irq 37 on simplebus1 uart3: <16550 or compatible> mem 0x11d600-0x11d6ff irq 37 on simplebus1 gpioc0: on gpio0 ehci0: mem 0x210000-0x210fff irq 44 on simplebus1 usbus0: EHCI version 1.0 usbus0 on ehci0 ehci1: mem 0x211000-0x211fff irq 45 on simplebus1 usbus1: EHCI version 1.0 usbus1 on ehci1 fslsata0: mem 0x220000-0x220fff irq 68 on simplebus1 fslsata1: mem 0x221000-0x221fff irq 69 on simplebus1 vgapci0: at device 0.0 numa-domain 0 on pci1 pci1: at device 0.1 (no driver attached) gpiopower0: on ofwbus0 gpiopower1: on ofwbus0 Timecounter "timebase" frequency 24937500 Hz quality 1000 Event timer "decrementer" frequency 24937500 Hz quality 1000 Timecounters tick every 1.000 msec ds13070: registered as a time-of-day clock, resolution 1.000000s usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: at usbus0 uhub0 on usbus0 uhub0: on usbus0 ugen1.1: at usbus1 The only thing plugged in is the serial console cable, a network cable, one hard drive, and the video card. I don't know how this could be? uhub1 on usbus1 uhub1: on usbus1 uhub0: 1 port with 1 removable, self powered uhub1: 1 port with 1 removable, self powered mmcsd0: 4GB at mmc0 49.8MHz/4bit/65535-block Launching APs: 1 ada0 at fslsata0 bus 0 scbus0 target 0 lun 0 ada0: ACS-2 ATA SATA 3.x device ada0: Serial Number 191078805013 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 228944MB (468877312 512 byte sectors) Trying to mount root from ufs:/dev/ada0s2a [rw]... ugen0.2: at usbus0 uhub2 on uhub0 uhub2: on usbus0 uhub2: MTT enabled ugen1.2: at usbus1 uhub3 on uhub1 uhub3: on usbus1 uhub3: MTT enabled uhub2: 4 ports with 4 removable, self powered uhub3: 4 ports with 4 removable, self powered random: unblocking device. However, it would boot with the older kernels. Please let me know if anyone has any solutions. Kind Regards, Al --------------11BF639CA98BC9D954391D21--