[Bug 267060] net/dpdk: error: too many arguments to function call, expected 3, have 4
Date: Fri, 14 Oct 2022 21:20:52 UTC
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=267060
--- Comment #1 from Martin Filla <freebsd@sysctl.cz> ---
In poudriere without issue
=======================<phase: package >============================
===> Building package for dpdk-19.11.12
===========================================================================
=>> Recording filesystem state for preinst... done
=======================<phase: install >============================
===> Installing for dpdk-19.11.12
===> Checking if dpdk is already installed
===> Registering installation for dpdk-19.11.12
[freebsd13x64-default] Installing dpdk-19.11.12...
The Intel(R) DPDK requires two kernel modules to be loaded in order to run.
To load these modules add loading lines to /boot/loader.conf
contigmem_load="YES"
nic_uio_load="YES"
The modules each take a number of parameters. These should be set in
loader.conf
before the above two lines to load the module.
* The "contigmem" module is used to reserve contiguous blocks of physical
memory
for packet buffer use. It takes parameters for the number and size of blocks
to be reserved. An example is below, reserving a single 1G block:
hw.contigmem.num_buffers=1
hw.contigmem.buffer_size=1073741824
* The "nic_uio" module is used to expose the network card (NIC) hardware
directly to userspace for use with the Intel(R) DPDK. If the NIC ports to be
used are in use by an existing driver, the nic_uio module can unbind the port
from its existing driver when requested to do so. This is done by passing the
relevant PCI bus, device and function settings to the driver as parameters.
For example:
hw.nic_uio.bdfs="2:0:0,2:0:1"
===> SECURITY REPORT:
This port has installed the following files which may act as network
servers and may therefore pose a remote security risk to the system.
/usr/local/lib/librte_telemetry.a(librte_telemetry_rte_telemetry_parser_test.c.o)
/usr/local/lib/librte_telemetry.so.0.200
/usr/local/lib/librte_telemetry.a(librte_telemetry_rte_telemetry.c.o)
If there are vulnerabilities in these programs there may be a security
risk to the system. FreeBSD makes no guarantee about the security of
ports included in the Ports Collection. Please type 'make deinstall'
to deinstall the port if this is a concern.
For more information, and contact details about the security
status of this software, see the following webpage:
http://dpdk.org/
===========================================================================
=>> Checking shared library dependencies
0x0000000000000001 NEEDED Shared library: [libc.so.7]
0x0000000000000001 NEEDED Shared library: [libexecinfo.so.1]
0x0000000000000001 NEEDED Shared library: [libjansson.so.4]
0x0000000000000001 NEEDED Shared library: [libm.so.5]
0x0000000000000001 NEEDED Shared library: [libpcap.so.8]
0x0000000000000001 NEEDED Shared library: [librte_acl.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_bbdev.so.0.200]
0x0000000000000001 NEEDED Shared library:
[librte_bitratestats.so.20.0]
0x0000000000000001 NEEDED Shared library: [librte_bpf.so.0.200]
0x0000000000000001 NEEDED Shared library:
[librte_bus_pci.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_bus_vdev.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_cmdline.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_common_octeontx.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_common_octeontx2.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_compressdev.so.0.200]
0x0000000000000001 NEEDED Shared library:
[librte_cryptodev.so.20.0]
0x0000000000000001 NEEDED Shared library: [librte_eal.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_ethdev.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_eventdev.so.20.0]
0x0000000000000001 NEEDED Shared library: [librte_gro.so.20.0]
0x0000000000000001 NEEDED Shared library: [librte_gso.so.20.0]
0x0000000000000001 NEEDED Shared library: [librte_hash.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_ip_frag.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_ipsec.so.0.200]
0x0000000000000001 NEEDED Shared library:
[librte_kvargs.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_latencystats.so.20.0]
0x0000000000000001 NEEDED Shared library: [librte_lpm.so.20.0]
0x0000000000000001 NEEDED Shared library: [librte_mbuf.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_mempool.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_mempool_octeontx.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_mempool_octeontx2.so.20.0]
0x0000000000000001 NEEDED Shared library: [librte_meter.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_metrics.so.20.0]
0x0000000000000001 NEEDED Shared library: [librte_net.so.20.0]
0x0000000000000001 NEEDED Shared library: [librte_pci.so.20.0]
0x0000000000000001 NEEDED Shared library: [librte_pdump.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_pipeline.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_pmd_bbdev_fpga_lte_fec.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_pmd_bnxt.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_pmd_bond.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_pmd_crypto_scheduler.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_pmd_i40e.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_pmd_ixgbe.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_pmd_octeontx.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_pmd_octeontx2.so.20.0]
0x0000000000000001 NEEDED Shared library: [librte_port.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_rawdev.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_reorder.so.20.0]
0x0000000000000001 NEEDED Shared library: [librte_rib.so.0.200]
0x0000000000000001 NEEDED Shared library: [librte_ring.so.20.0]
0x0000000000000001 NEEDED Shared library: [librte_sched.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_security.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_stack.so.0.200]
0x0000000000000001 NEEDED Shared library: [librte_table.so.20.0]
0x0000000000000001 NEEDED Shared library:
[librte_telemetry.so.0.200]
0x0000000000000001 NEEDED Shared library: [librte_timer.so.20.0]
0x0000000000000001 NEEDED Shared library: [libthr.so.3]
0x0000000000000001 NEEDED Shared library: [libz.so.6]
=======================<phase: deinstall >============================
===> Deinstalling for dpdk
===> Deinstalling dpdk-19.11.12
Updating database digests format: .......... done
Checking integrity... done (0 conflicting)
Deinstallation has been requested for the following 1 packages (of 0 packages
in the universe):
Installed packages to be REMOVED:
dpdk: 19.11.12
Number of packages to be removed: 1
The operation will free 30 MiB.
[freebsd13x64-default] [1/1] Deinstalling dpdk-19.11.12...
[freebsd13x64-default] [1/1] Deleting files for dpdk-19.11.12: .......... done
===========================================================================
=>> Checking for extra files and directories
[00:05:50] Installing from package
[freebsd13x64-default] Installing dpdk-19.11.12...
[freebsd13x64-default] Extracting dpdk-19.11.12: .......... done
=====
Message from dpdk-19.11.12:
--
The Intel(R) DPDK requires two kernel modules to be loaded in order to run.
To load these modules add loading lines to /boot/loader.conf
contigmem_load="YES"
nic_uio_load="YES"
The modules each take a number of parameters. These should be set in
loader.conf
before the above two lines to load the module.
* The "contigmem" module is used to reserve contiguous blocks of physical
memory
for packet buffer use. It takes parameters for the number and size of blocks
to be reserved. An example is below, reserving a single 1G block:
hw.contigmem.num_buffers=1
hw.contigmem.buffer_size=1073741824
* The "nic_uio" module is used to expose the network card (NIC) hardware
directly to userspace for use with the Intel(R) DPDK. If the NIC ports to be
used are in use by an existing driver, the nic_uio module can unbind the port
from its existing driver when requested to do so. This is done by passing the
relevant PCI bus, device and function settings to the driver as parameters.
For example:
hw.nic_uio.bdfs="2:0:0,2:0:1"
[00:05:51] Cleaning up
===> Cleaning for dpdk-19.11.12
[00:05:52] Deinstalling package
Updating database digests format: . done
Checking integrity... done (0 conflicting)
Deinstallation has been requested for the following 1 packages (of 0 packages
in the universe):
Installed packages to be REMOVED:
dpdk: 19.11.12
Number of packages to be removed: 1
The operation will free 30 MiB.
[freebsd13x64-default] [1/1] Deinstalling dpdk-19.11.12...
[freebsd13x64-default] [1/1] Deleting files for dpdk-19.11.12: .......... done
build of net/dpdk | dpdk-19.11.12 ended at Fri Oct 14 23:16:29 CEST 2022
--
You are receiving this mail because:
You are the assignee for the bug.