[Bug 264621] net/frr ospf6 doesn't transmit on bridge interfaces.
Date: Sat, 11 Jun 2022 20:57:42 UTC
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=264621 Bug ID: 264621 Summary: net/frr ospf6 doesn't transmit on bridge interfaces. Product: Ports & Packages Version: Latest Hardware: Any OS: Any Status: New Severity: Affects Some People Priority: --- Component: Individual Port(s) Assignee: ports-bugs@FreeBSD.org Reporter: dgilbert@eicat.ca I have FRR OSPF and OSPF6 configured on my lan. I also have BGP configured, but not on this host --- so it's just a reference that I "generally" know what I'm doing with networks. On this particular host, I have a number of VMs on a bridge and one VM will now be configured to receive VPNs... so I want to extend OSPF and OSPF6 to the bridge. Extending OSPF with FRR went as expected. No problems. Extending OSPF6 didn't. No other routers show up on either host or VM. Curiously, while I can IPv6 ping across the interface, no OSPF6 traffic shows. Just to short circuit the obvious question, I have interface bridge1 ip ospf cost 200 ip ospf dead-interval 20 ip ospf hello-interval 5 on the host and interface vnet0 ip ospf cost 200 ip ospf dead-interval 20 ip ospf hello-interval 5 On the host, I have a host on the ipv6 network with a /64 netmask, and on the vm I have a host on that same network with a /64 netmask. host ospf6 clause: router ospf6 ospf6 router-id 1.2.3.4 redistribute kernel redistribute connected redistribute static interface igb0.401 area 0.0.0.0 interface bridge1 area 2.4.5.6 vm ospf6 clause: router ospf6 ospf6 router-id 1.2.3.5 redistribute kernel redistribute connected redistribute static interface vnet0 area 2.4.5.6 Now... this may be an FRR problem, but I suspect it's a FreeBSD FRR problem as a tcpdump on the bridge doesn't show ospf6 packets. The host is 13.0-p11 and the VM is 13.1-RELEASE -- You are receiving this mail because: You are the assignee for the bug.