From nobody Sat Feb 03 21:12:34 2024 X-Original-To: pkg-fallout@mlmmj.nyi.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mlmmj.nyi.freebsd.org (Postfix) with ESMTP id 4TS52B5t6Wz58RG6 for ; Sat, 3 Feb 2024 21:12:34 +0000 (UTC) (envelope-from pkg-fallout@FreeBSD.org) Received: from mxrelay.nyi.freebsd.org (mxrelay.nyi.freebsd.org [IPv6:2610:1c1:1:606c::19:3]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256 client-signature RSA-PSS (4096 bits) client-digest SHA256) (Client CN "mxrelay.nyi.freebsd.org", Issuer "R3" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 4TS52B4TWmz4DJW for ; Sat, 3 Feb 2024 21:12:34 +0000 (UTC) (envelope-from pkg-fallout@FreeBSD.org) ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=freebsd.org; s=dkim; t=1706994754; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc; bh=kxO+fzQqx+vCvASphOOP5TCi8h0+azTsdg2csu9w8mg=; b=vjGTm4XOZfxtrMyUYMPK+aw+Mri39lGlhMCUaffz/Inhm0iJfn+pURqIGuvrNztxygWN28 nlHTXdABLx8QuDhZD+W/H/be0TEHaNPxn34PHVo2BQ6BQoV3lL07FnSdqGvZlryHCgnpNI QZbYgA6AfyRJKz4wJaNI2w5bcexDhZttoQimJ4jDAz6yhwwk8mpkBKpOMnKySxymiAZGjG ljk+eSBP+ZKcYxoZbSYU9qrQ+1UCAdAjv6zxoU584kW10BO9xIA77QGFm8uDvmM884OFiU 17kR/NO5xdtOMbVsEzdnBGOsV7ccet3biV7AClbxwegXU2EBxNQSkkudXIvqxA== ARC-Authentication-Results: i=1; mx1.freebsd.org; none ARC-Seal: i=1; s=dkim; d=freebsd.org; t=1706994754; a=rsa-sha256; cv=none; b=dueWQXRFtLMMiz14+63rQPnACBW476smi1rHrKnoXJlHA0IGEulKG2hHEbgecpGhdStkKu dPJOoMc1l3cW1bu+V0p7DW20yPIb4k9zpGRkXA929VI+GeibpmxJK5fThdMi1QUn3vL5Wy ZEjgwFip0+M+2sfqVD57PyBpKkHZzMcXiQvFh/TPzvaTQMQyvSFPkMM2cKTaR1OzKjAMJ3 4xCt92eUaqZScYQtMcZc3f3RtGg8WG5uqLJoHWjcT8PyyVlkVaK25lPFmp8Y0N6eT/0qx3 SZ+OKk5QPLefs5F+/cHiiPy4M4DegsjzdlklEoQlpp5g2MFnRR5DtAlOEW1OqQ== Received: from beefy14.nyi.freebsd.org (beefy14.nyi.freebsd.org [IPv6:2610:1c1:1:6080::16:1d]) by mxrelay.nyi.freebsd.org (Postfix) with ESMTP id 4TS52B3M9pzV6s for ; Sat, 3 Feb 2024 21:12:34 +0000 (UTC) (envelope-from pkg-fallout@FreeBSD.org) Received: from root (uid 0) (envelope-from pkg-fallout@FreeBSD.org) id 4da1 by beefy14.nyi.freebsd.org (DragonFly Mail Agent v0.13+ on beefy14.nyi.freebsd.org); Sat, 03 Feb 2024 21:12:34 +0000 To: danfe@FreeBSD.org Subject: [package - 132amd64-quarterly][cad/zcad] Failed for zcad-qt5-0.9.8.5_11 in build Cc: pkg-fallout@FreeBSD.org Date: Sat, 03 Feb 2024 21:12:34 +0000 Message-Id: <65beac42.4da1.52945a5f@beefy14.nyi.freebsd.org> From: List-Id: Fallout logs from package building List-Archive: https://lists.freebsd.org/archives/freebsd-pkg-fallout List-Help: List-Post: List-Subscribe: List-Unsubscribe: Sender: owner-freebsd-pkg-fallout@freebsd.org You are receiving this mail as a port that you maintain is failing to build on the FreeBSD package build server. Please investigate the failure and submit a PR to fix build. Maintainer: danfe@FreeBSD.org Log URL: https://pkg-status.freebsd.org/beefy14/data/132amd64-quarterly/aa3532662c1f/logs/zcad-qt5-0.9.8.5_11.log Build URL: https://pkg-status.freebsd.org/beefy14/build.html?mastername=132amd64-quarterly&build=aa3532662c1f Log: =>> Building cad/zcad build started at Sat Feb 3 21:11:18 UTC 2024 port directory: /usr/ports/cad/zcad package name: zcad-qt5-0.9.8.5_11 building for: FreeBSD 132amd64-quarterly-job-08 13.2-RELEASE-p9 FreeBSD 13.2-RELEASE-p9 amd64 maintained by: danfe@FreeBSD.org Makefile datestamp: -rw-r--r-- 1 root wheel 4063 Jan 6 01:02 /usr/ports/cad/zcad/Makefile Ports top last git commit: aa3532662 Ports top unclean checkout: no Port dir last git commit: 756e18783 Port dir unclean checkout: no Poudriere version: poudriere-git-3.4.1 Host OSVERSION: 1500006 Jail OSVERSION: 1302001 Job Id: 08 ---Begin Environment--- SHELL=/bin/csh OSVERSION=1302001 UNAME_v=FreeBSD 13.2-RELEASE-p9 UNAME_r=13.2-RELEASE-p9 BLOCKSIZE=K MAIL=/var/mail/root MM_CHARSET=UTF-8 LANG=C.UTF-8 STATUS=1 HOME=/root PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin MAKE_OBJDIR_CHECK_WRITABLE=0 LOCALBASE=/usr/local USER=root POUDRIERE_NAME=poudriere-git LIBEXECPREFIX=/usr/local/libexec/poudriere POUDRIERE_VERSION=3.4.1 MASTERMNT=/usr/local/poudriere/data/.m/132amd64-quarterly/ref LC_COLLATE=C POUDRIERE_BUILD_TYPE=bulk PACKAGE_BUILDING=yes SAVED_TERM= OUTPUT_REDIRECTED_STDERR=4 OUTPUT_REDIRECTED=1 PWD=/usr/local/poudriere/data/.m/132amd64-quarterly/08/.p OUTPUT_REDIRECTED_STDOUT=3 P_PORTS_FEATURES=FLAVORS SUBPACKAGES SELECTED_OPTIONS MASTERNAME=132amd64-quarterly SCRIPTPREFIX=/usr/local/share/poudriere SCRIPTNAME=bulk.sh OLDPWD=/usr/local/poudriere/data/.m/132amd64-quarterly/ref/.p/pool POUDRIERE_PKGNAME=poudriere-git-3.4.1 SCRIPTPATH=/usr/local/share/poudriere/bulk.sh POUDRIEREPATH=/usr/local/bin/poudriere ---End Environment--- ---Begin Poudriere Port Flags/Env--- PORT_FLAGS= PKGENV= FLAVOR=qt5 MAKE_ARGS= FLAVOR=qt5 ---End Poudriere Port Flags/Env--- ---Begin OPTIONS List--- ===> The following configuration options are available for zcad-qt5-0.9.8.5_11: DOCS=on: Build and/or install documentation ===> Use 'make config' to modify these settings ---End OPTIONS List--- --MAINTAINER-- danfe@FreeBSD.org --End MAINTAINER-- --CONFIGURE_ARGS-- --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- XDG_DATA_HOME=/wrkdirs/usr/ports/cad/zcad/work-qt5 XDG_CONFIG_HOME=/wrkdirs/usr/ports/cad/zcad/work-qt5 XDG_CACHE_HOME=/wrkdirs/usr/ports/cad/zcad/work-qt5/.cache HOME=/wrkdirs/usr/ports/cad/zcad/work-qt5 TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/cad/zcad/work-qt5/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin PKG_CONFIG_LIBDIR=/wrkdirs/usr/ports/cad/zcad/work-qt5/.pkgconfig:/usr/local/libdata/pkgconfig:/usr/local/share/pkgconfig:/usr/libdata/pkgconfig SHELL=/bin/sh CONFIG_SHELL=/bin/sh --End CONFIGURE_ENV-- --MAKE_ENV-- LAZBUILD_CMD="/usr/local/bin/lazbuild" LAZBUILD_ARGS="-d --pcp=/wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/tmppcp" LCL_PLATFORM="qt5" LAZARUS_DIR="/usr/local/share/lazarus-3.0.0" INSTANTFPCCACHE="/wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/.cache" XDG_DATA_HOME=/wrkdirs/usr/ports/cad/zcad/work-qt5 XDG_CONFIG_HOME=/wrkdirs/usr/ports/cad/zcad/work-qt5 XDG_CACHE_HOME=/wrkdirs/usr/ports/cad/zcad/work-qt5/.cache HOME=/wrkdirs/usr/ports/cad/zcad/work-qt5 TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/cad/zcad/work-qt5/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin PKG_CONFIG_LIBDIR=/wrkdirs/usr/ports/cad/zcad/work-qt5/.pkgconfig:/usr/local/libdata/pkgconfig:/usr/local/share/pkgconfig:/usr/libdata/pkgconfig MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES PREFIX=/usr/local LOCALBASE=/usr/local CC="cc" CFLAGS="-O2 -pipe -fstack-protector-strong -fno-strict-aliasing " CPP="cpp" CPPFLAGS="" LDFLAGS=" -fstack-protector-strong " LIBS="" CXX="c++" CXXFLAGS="-O2 -pipe -fstack-protector-strong -fno-strict-aliasing " MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- PORTDOCS="" OSREL=13.2 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local LIB32DIR=lib DOCSDIR="share/doc/zcad" EXAMPLESDIR="share/examples/zcad" DATADIR="share/zcad" WWWDIR="www/zcad" ETCDIR="etc/zcad" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/zcad DOCSDIR=/usr/local/share/doc/zcad EXAMPLESDIR=/usr/local/share/examples/zcad WWWDIR=/usr/local/www/zcad ETCDIR=/usr/local/etc/zcad --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles PACKAGE_BUILDING=yes PACKAGE_BUILDING_FLAVORS=yes #### #### # XXX: We really need this but cannot use it while 'make checksum' does not # try the next mirror on checksum failure. It currently retries the same # failed mirror and then fails rather then trying another. It *does* # try the next if the size is mismatched though. #MASTER_SITE_FREEBSD=yes # Build ALLOW_MAKE_JOBS_PACKAGES with 3 jobs MAKE_JOBS_NUMBER=3 #### Misc Poudriere #### .include "/etc/make.conf.ports_env" GID=0 UID=0 ---End make.conf--- --Resource limits-- cpu time (seconds, -t) unlimited file size (512-blocks, -f) unlimited data seg size (kbytes, -d) 33554432 stack size (kbytes, -s) 524288 core file size (512-blocks, -c) unlimited max memory size (kbytes, -m) unlimited locked memory (kbytes, -l) unlimited max user processes (-u) 89999 open files (-n) 8192 virtual mem size (kbytes, -v) unlimited swap limit (kbytes, -w) unlimited socket buffer size (bytes, -b) unlimited pseudo-terminals (-p) unlimited kqueues (-k) unlimited umtx shared locks (-o) unlimited --End resource limits-- =================================================== ===== env: NO_DEPENDS=yes USER=root UID=0 GID=0 =========================================================================== =================================================== ===== env: USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 ===> zcad-qt5-0.9.8.5_11 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.20.9.pkg [132amd64-quarterly-job-08] Installing pkg-1.20.9... [132amd64-quarterly-job-08] Extracting pkg-1.20.9: .......... done ===> zcad-qt5-0.9.8.5_11 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of zcad-qt5-0.9.8.5_11 =========================================================================== =================================================== ===== env: USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 =========================================================================== =================================================== ===== env: NO_DEPENDS=yes USER=root UID=0 GID=0 ===> Fetching all distfiles required by zcad-qt5-0.9.8.5_11 for building =========================================================================== =================================================== ===== env: NO_DEPENDS=yes USER=root UID=0 GID=0 ===> Fetching all distfiles required by zcad-qt5-0.9.8.5_11 for building => SHA256 Checksum OK for zamtmn-zcad-0.9.8.5-8b8a693_GH0.tar.gz. =========================================================================== =================================================== ===== env: USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 =========================================================================== =================================================== ===== env: NO_DEPENDS=yes USER=root UID=0 GID=0 ===> Fetching all distfiles required by zcad-qt5-0.9.8.5_11 for building ===> Extracting for zcad-qt5-0.9.8.5_11 => SHA256 Checksum OK for zamtmn-zcad-0.9.8.5-8b8a693_GH0.tar.gz. =========================================================================== =================================================== ===== env: USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 =========================================================================== =================================================== ===== env: NO_DEPENDS=yes USER=root UID=0 GID=0 ===> Patching for zcad-qt5-0.9.8.5_11 ===> Converting DOS text files to UNIX text files ===> Applying FreeBSD patches for zcad-qt5-0.9.8.5_11 from /usr/ports/cad/zcad/files =========================================================================== =================================================== ===== env: USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 ===> zcad-qt5-0.9.8.5_11 depends on file: /usr/local/bin/as - not found ===> Installing existing package /packages/All/binutils-2.40_4,1.pkg [132amd64-quarterly-job-08] Installing binutils-2.40_4,1... [132amd64-quarterly-job-08] `-- Installing gettext-runtime-0.22.3... [132amd64-quarterly-job-08] | `-- Installing indexinfo-0.3.1... [132amd64-quarterly-job-08] | `-- Extracting indexinfo-0.3.1: .... done [132amd64-quarterly-job-08] `-- Extracting gettext-runtime-0.22.3: .......... done [132amd64-quarterly-job-08] `-- Installing zstd-1.5.5... [132amd64-quarterly-job-08] | `-- Installing liblz4-1.9.4,1... [132amd64-quarterly-job-08] | `-- Extracting liblz4-1.9.4,1: .......... done [132amd64-quarterly-job-08] `-- Extracting zstd-1.5.5: .......... done [132amd64-quarterly-job-08] Extracting binutils-2.40_4,1: .......... done ===> zcad-qt5-0.9.8.5_11 depends on file: /usr/local/bin/as - found ===> Returning to build of zcad-qt5-0.9.8.5_11 ===> zcad-qt5-0.9.8.5_11 depends on file: /usr/local/lib/fpc/3.2.2/ppcx64 - not found ===> Installing existing package /packages/All/fpc-3.2.2_8.pkg [132amd64-quarterly-job-08] Installing fpc-3.2.2_8... [132amd64-quarterly-job-08] Extracting fpc-3.2.2_8: .......... done ===== Message from fpc-3.2.2_8: -- 1) Add lib paths to /usr/local/etc/fpc.cfg # searchpath for libraries -Fl/usr/local/lib (3104) Compiling fpvectorial2canvas.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/fpvectorial/fpvectorial2canvas.pas(47,31) Hint: (5024) Parameter "ARenderInfo" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/fpvectorial/fpvectorial2canvas.pas(47,58) Hint: (5024) Parameter "ADoDraw" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/fpvectorial/fpvectorial2canvas.pas(48,29) Hint: (5024) Parameter "ARenderInfo" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/fpvectorial/fpvectorial2canvas.pas(48,56) Hint: (5024) Parameter "ADoDraw" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/fpvectorial/fpvectorial2canvas.pas(31,37) Hint: (5023) Unit "Contnrs" not used in fpvectorial2canvas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/fpvectorial/fpvectorial2canvas.pas(37,3) Hint: (5023) Unit "LazRegions" not used in fpvectorial2canvas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/fpvectorial/fpvectorialpkg.pas(11,16) Hint: (5023) Unit "fpvtocanvas" not used in fpvectorialpkg /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/fpvectorial/fpvectorialpkg.pas(11,29) Hint: (5023) Unit "fpvectbuildunit" not used in fpvectorialpkg /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/fpvectorial/fpvectorialpkg.pas(11,56) Hint: (5023) Unit "avisozlib" not used in fpvectorialpkg /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/fpvectorial/fpvectorialpkg.pas(14,3) Hint: (5023) Unit "lazvectorialreader" not used in fpvectorialpkg /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/fpvectorial/fpvectorialpkg.pas(17,44) Hint: (5023) Unit "fpvWMF" not used in fpvectorialpkg (1008) 34106 lines compiled, 3.1 sec (1021) 92 warning(s) issued (1022) 396 hint(s) issued (1023) 227 note(s) issued Hint: (lazarus) Compiler unit paths changed for lclextensions_package 0.6.1 Old="/wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/packager/units/x86_64-freebsd;/wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lazutils/lib/x86_64-freebsd;/wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/freetype/lib/x86_64-freebsd;/wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/lcl/units/x86_64-freebsd;/wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/lcl/units/x86_64-freebsd/qt5;/wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions" Now="/usr/local/share/lazarus-3.0.0/packager/units/x86_64-freebsd;/usr/local/share/lazarus-3.0.0/components/lazutils/lib/x86_64-freebsd;/usr/local/share/lazarus-3.0.0/components/freetype/lib/x86_64-freebsd;/usr/local/share/lazarus-3.0.0/lcl/units/x86_64-freebsd;/usr/local/share/lazarus-3.0.0/lcl/units/x86_64-freebsd/qt5;/wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions" State file="/wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/lib/x86_64-freebsd-qt5/lclextensions_package.compiled" Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.2.2 [2024/01/06] for x86_64 Copyright (c) 1993-2021 by Florian Klaempfl and others (1002) Target OS: FreeBSD for x86-64 (3104) Compiling lclextensions_package.pas (3104) Compiling delphicompat.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(77,35) Hint: (5024) Parameter "nNumWindows" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(81,25) Hint: (5024) Parameter "hImage" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(81,47) Hint: (5024) Parameter "uType" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(81,68) Hint: (5024) Parameter "cxDesired" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(81,84) Hint: (5024) Parameter "cyDesired" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(81,109) Hint: (5024) Parameter "fuFlags" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(83,30) Hint: (5024) Parameter "hWinPosInfo" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(83,48) Hint: (5024) Parameter "hWnd" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(83,59) Hint: (5024) Parameter "hWndInsertAfter" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(83,89) Hint: (5024) Parameter "x" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(83,97) Hint: (5024) Parameter "y" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(83,105) Hint: (5024) Parameter "cx" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(83,114) Hint: (5024) Parameter "cy" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(83,131) Hint: (5024) Parameter "uFlags" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(86,33) Hint: (5024) Parameter "hWinPosInfo" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(94,23) Hint: (5024) Parameter "hWnd" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(94,42) Hint: (5024) Parameter "hrgnClip" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(94,62) Hint: (5024) Parameter "flags" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(96,33) Hint: (5024) Parameter "dwLayout" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(97,32) Hint: (5024) Parameter "lpKeyState" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(98,29) Hint: (5024) Parameter "Locale" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(98,42) Hint: (5024) Parameter "LCType" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(98,64) Hint: (5024) Parameter "lpLCData" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(98,85) Hint: (5024) Parameter "cchData" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(99,28) Hint: (5024) Parameter "DC" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(99,42) Hint: (5024) Parameter "Rgn" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(99,58) Hint: (5024) Parameter "iNum" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(110,40) Hint: (5024) Parameter "fShow" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(116,35) Hint: (5024) Parameter "CodePage" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(116,50) Hint: (5024) Parameter "dwFlags" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(116,70) Hint: (5024) Parameter "lpMultiByteStr" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(116,97) Hint: (5024) Parameter "cchMultiByte" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(116,124) Hint: (5024) Parameter "lpWideCharStr" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(116,153) Hint: (5024) Parameter "cchWideChar" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(122,24) Hint: (5024) Parameter "DC" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(122,37) Hint: (5024) Parameter "dx" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(122,54) Hint: (5024) Parameter "dy" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(122,75) Hint: (5024) Parameter "lprcScroll" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(122,102) Hint: (5024) Parameter "lprcClip" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(122,122) Hint: (5024) Parameter "hrgnUpdate" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(122,144) Hint: (5024) Parameter "lprcUpdate" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(126,32) Hint: (5024) Parameter "lprcDst" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(126,59) Hint: (5024) Parameter "lprcSrc1" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(126,74) Hint: (5024) Parameter "lprcSrc2" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(129,23) Hint: (5024) Parameter "uVirtKey" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(129,38) Hint: (5024) Parameter "uScanCode" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(129,63) Hint: (5024) Parameter "lpKeyState" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(129,87) Hint: (5024) Parameter "lpChar" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(129,107) Hint: (5024) Parameter "uFlags" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(131,28) Hint: (5024) Parameter "Handle" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/./include/qt5/../generic/unicodefunctions.inc(20,16) Note: (6058) Call to subroutine "function UTF8CodepointSize(p:PChar):LongInt;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/./include/qt5/../generic/unicodefunctions.inc(55,48) Hint: (5058) Variable "Size" does not seem to be initialized /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/./include/qt5/../generic/unicodefunctions.inc(75,48) Hint: (5058) Variable "Size" does not seem to be initialized /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/delphicompat.pas(123,86) Hint: (5024) Parameter "lpClipRect" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/./include/qt5/delphicompat.inc(171,26) Hint: (5024) Parameter "Sender" not used (3104) Compiling oleutils.pas (3104) Compiling lclext.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/lclext.pas(42,32) Hint: (5024) Parameter "BitmapDC" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/lclext.pas(42,52) Hint: (5024) Parameter "Width" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/lclext.pas(42,64) Hint: (5024) Parameter "Height" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/lclext.pas(42,86) Hint: (5024) Parameter "TransparentColor" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/lclextensions_package.pas(11,17) Hint: (5023) Unit "oleutils" not used in lclextensions_package /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/lclextensions/lclextensions_package.pas(11,27) Hint: (5023) Unit "LclExt" not used in lclextensions_package (1008) 1109 lines compiled, 0.9 sec (1022) 62 hint(s) issued (1023) 1 note(s) issued Hint: (lazarus) Missing state file of laz.virtualtreeview_package 5.5.3.1: /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/lib/x86_64-freebsd-qt5/laz.virtualtreeview_package.compiled Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.2.2 [2024/01/06] for x86_64 Copyright (c) 1993-2021 by Florian Klaempfl and others (1002) Target OS: FreeBSD for x86-64 (3104) Compiling laz.virtualtreeview_package.pas (3104) Compiling laz.virtualtrees.pas (3104) Compiling ./units/qt5/laz.fakeactivex.pas (3104) Compiling ./units/qt5/laz.virtualpanningwindow.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./units/qt5/laz.virtualpanningwindow.pas(21,21) Hint: (5024) Parameter "OwnerHandle" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./units/qt5/laz.virtualpanningwindow.pas(21,49) Hint: (5024) Parameter "Position" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./units/qt5/laz.virtualpanningwindow.pas(23,20) Hint: (5024) Parameter "ClipRegion" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./units/qt5/laz.virtualpanningwindow.pas(17,5) Note: (5029) Private field "TVirtualPanningWindow.FOwnerHandle" is never used (3104) Compiling laz.vtgraphics.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/laz.vtgraphicsi.inc(8,34) Hint: (5024) Parameter "Source" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/laz.vtgraphicsi.inc(8,42) Hint: (5024) Parameter "Destination" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/laz.vtgraphicsi.inc(8,64) Hint: (5024) Parameter "Count" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/laz.vtgraphicsi.inc(8,80) Hint: (5024) Parameter "ConstantAlpha" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/laz.vtgraphicsi.inc(8,95) Hint: (5024) Parameter "Bias" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/laz.vtgraphicsi.inc(181,34) Hint: (5024) Parameter "Source" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/laz.vtgraphicsi.inc(181,42) Hint: (5024) Parameter "Destination" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/laz.vtgraphicsi.inc(181,64) Hint: (5024) Parameter "Count" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/laz.vtgraphicsi.inc(181,71) Hint: (5024) Parameter "Bias" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/laz.vtgraphicsi.inc(345,32) Hint: (5024) Parameter "Source" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/laz.vtgraphicsi.inc(345,40) Hint: (5024) Parameter "Destination" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/laz.vtgraphicsi.inc(345,62) Hint: (5024) Parameter "Count" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/laz.vtgraphicsi.inc(345,78) Hint: (5024) Parameter "ConstantAlpha" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/laz.vtgraphicsi.inc(345,93) Hint: (5024) Parameter "Bias" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/laz.vtgraphicsi.inc(533,40) Hint: (5024) Parameter "Destination" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/laz.vtgraphicsi.inc(533,62) Hint: (5024) Parameter "Count" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/laz.vtgraphicsi.inc(533,78) Hint: (5024) Parameter "ConstantAlpha" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/laz.vtgraphicsi.inc(533,93) Hint: (5024) Parameter "Color" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/laz.vtgraphics.pas(23,55) Hint: (5024) Parameter "Height" not used (3104) Compiling ./units/qt5/laz.fakemmsystem.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./units/qt5/laz.fakemmsystem.pas(18,10) Warning: (5033) Function result does not seem to be set /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./units/qt5/laz.fakemmsystem.pas(10,26) Hint: (5024) Parameter "x1" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./units/qt5/laz.fakemmsystem.pas(23,10) Warning: (5033) Function result does not seem to be set /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./units/qt5/laz.fakemmsystem.pas(12,24) Hint: (5024) Parameter "x1" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./units/qt5/laz.fakemmsystem.pas(33,21) Hint: (5057) Local variable "ATime" does not seem to be initialized /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/laz.virtualtrees.pas(4198,60) Hint: (5024) Parameter "ContentRect" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/laz.virtualtrees.pas(4995,18) Hint: (5091) Local variable "Words" of a managed type does not seem to be initialized /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/laz.virtualtrees.pas(5615,53) Hint: (5057) Local variable "Msg" does not seem to be initialized /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/laz.virtualtrees.pas(5736,18) Warning: (4105) Implicit string type conversion with potential data loss from "UnicodeString" to "AnsiString" /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummydragmanager.inc(15,3) Note: (5025) Local variable "I" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummydragmanager.inc(125,3) Note: (5025) Local variable "I" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummydragmanager.inc(126,3) Note: (5025) Local variable "StgMedium" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummydragmanager.inc(186,3) Note: (5025) Local variable "I" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummydragmanager.inc(292,3) Note: (5025) Local variable "Len" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummydragmanager.inc(772,3) Note: (5025) Local variable "RButton" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummydragmanager.inc(773,3) Note: (5025) Local variable "LButton" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/laz.virtualtrees.pas(8895,15) Note: (6058) Call to subroutine "function CompareMem(P1:Pointer;P2:Pointer;Length:QWord):Boolean;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/laz.virtualtrees.pas(13972,3) Note: (5025) Local variable "WasValidating" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/laz.virtualtrees.pas(16587,8) Note: (5025) Local variable "HitInfo" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummyolemethods.inc(9,3) Note: (5025) Local variable "Medium" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummyolemethods.inc(10,3) Note: (5025) Local variable "Data" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummyolemethods.inc(166,3) Note: (5025) Local variable "Medium" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummyolemethods.inc(167,3) Note: (5025) Local variable "Stream" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummyolemethods.inc(168,3) Note: (5025) Local variable "Data" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummyolemethods.inc(169,3) Note: (5025) Local variable "Node" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummyolemethods.inc(170,3) Note: (5025) Local variable "Nodes" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummyolemethods.inc(171,3) Note: (5025) Local variable "I" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummyolemethods.inc(172,3) Note: (5025) Local variable "Res" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummyolemethods.inc(173,3) Note: (5025) Local variable "ChangeReason" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummyolemethods.inc(358,3) Note: (5025) Local variable "Data" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummyolemethods.inc(359,3) Note: (5025) Local variable "DataSize" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummyolemethods.inc(360,3) Note: (5025) Local variable "S" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummyolemethods.inc(361,3) Note: (5025) Local variable "WS" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/./include/intf/qt5/../laz.dummyolemethods.inc(362,3) Note: (5025) Local variable "P" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/laz.virtualtrees.pas(725,5) Note: (5029) Private field "TEnumFormatEtc.FTree" is never used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/laz.virtualtrees.pas(726,5) Note: (5029) Private field "TEnumFormatEtc.FFormatEtcArray" is never used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/laz.virtualtrees.pas(727,5) Note: (5029) Private field "TEnumFormatEtc.FCurrentIndex" is never used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/laz.virtualtrees.pas(790,5) Note: (5029) Private field "TVTDataObject.FAdviseHolder" is never used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/laz.virtualtrees.pas(827,5) Note: (5029) Private field "TVTDragManager.FDragSource" is never used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/laz.virtualtrees.pas(829,5) Note: (5029) Private field "TVTDragManager.FIsDropTarget" is never used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/laz.virtualtrees.pas(830,5) Note: (5029) Private field "TVTDragManager.FDataObject" is never used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/laz.virtualtrees.pas(832,5) Note: (5029) Private field "TVTDragManager.FDropTargetHelper" is never used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/laz.virtualtrees.pas(833,5) Note: (5029) Private field "TVTDragManager.FFullDragging" is never used (1010) Writing Resource String Table file: laz.virtualtrees.rsj (3104) Compiling laz.vtheaderpopup.pas (1010) Writing Resource String Table file: laz.vtheaderpopup.rsj (3104) Compiling laz.registervirtualtreeview.pas (3104) Compiling laz.vtideeditors.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/laz.virtualtreeview_package.pas(11,21) Hint: (5023) Unit "laz.VTHeaderPopup" not used in laz.virtualtreeview_package /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/laz.virtualtreeview_package.pas(12,3) Hint: (5023) Unit "laz.VTGraphics" not used in laz.virtualtreeview_package /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/other/laz.virtualtreeview_package/laz.virtualtreeview_package.pas(12,19) Hint: (5023) Unit "laz.VTIDEEditors" not used in laz.virtualtreeview_package (1008) 39960 lines compiled, 2.8 sec (1021) 3 warning(s) issued (1022) 33 hint(s) issued (1023) 35 note(s) issued Hint: (lazarus) Missing state file of zmacros 0.0: /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/components/zmacros/lib/x86_64-freebsd/zmacros.compiled Hint: (11030) Start of reading config file /usr/local/etc/fpc.cfg Hint: (11031) End of reading config file /usr/local/etc/fpc.cfg Free Pascal Compiler version 3.2.2 [2024/01/06] for x86_64 Copyright (c) 1993-2021 by Florian Klaempfl and others (1002) Target OS: FreeBSD for x86-64 (3104) Compiling zmacros.pas (3104) Compiling uzmacros.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/components/zmacros/uzmacros.pas(9,13) Fatal: (10022) Can't find unit TransferMacros used by uzmacros Fatal: (1018) Compilation aborted Error: /usr/local/bin/ppcx64 returned an error exitcode Error: (lazarus) Compile package zmacros 0.0: stopped with exit code 1 Error: (lazbuild) zmacros 0.0 compilation failed *** Error code 2 Stop. make: stopped in /usr/ports/cad/zcad