From nobody Wed Feb 01 13:13:07 2023 X-Original-To: pkg-fallout@mlmmj.nyi.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mlmmj.nyi.freebsd.org (Postfix) with ESMTP id 4P6MmN3TRTz3cBcc for ; Wed, 1 Feb 2023 13:13:08 +0000 (UTC) (envelope-from pkg-fallout@FreeBSD.org) Received: from mxrelay.nyi.freebsd.org (mxrelay.nyi.freebsd.org [IPv6:2610:1c1:1:606c::19:3]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256 client-signature RSA-PSS (4096 bits) client-digest SHA256) (Client CN "mxrelay.nyi.freebsd.org", Issuer "R3" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 4P6MmN1QWmz49Pp; Wed, 1 Feb 2023 13:13:08 +0000 (UTC) (envelope-from pkg-fallout@FreeBSD.org) ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=freebsd.org; s=dkim; t=1675257188; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc; bh=/E7ffZYpB0bFJXeFzZ6NiZmq2xOJxdr/zGWqeBHlq1o=; b=lWukFVQoVHVeoMo5vrKgHAa5nLk5xMIwoPMqJtOVah6ZrFskeJNJnAfoU4w0+b1EtrXyXh WokLsyXG/LoOte9i1PWt5fkR/k7X7cosWYCuqCvq4I1LjjquME7iXR/y8TzES2FRRo5yw8 mPSzQrv/NwdxnEEsyS7KcHrqA+i2m66PpqqDBBXQCQFpvkzo/BkkSpWine7EOvRHSDKkS5 sGmM/xt9qxAp0wpK8Y9H7HVqN2z/r9UPC/bEDKNg5cCuzaf1FQUwXKqZV6uOf8Q7W1M5Gr cVjP/8q+EGVwzfoCTgcg0NmavwDj3FDvp47bhZ7Vfc+ojrl4mlVOQ17RG8fp3w== ARC-Authentication-Results: i=1; mx1.freebsd.org; none ARC-Seal: i=1; s=dkim; d=freebsd.org; t=1675257188; a=rsa-sha256; cv=none; b=d7C6RYOH+P6lAVcQ0OF7ZPnvAF2aHN+jDSGKI4wLrsAf8+c137YExnb9grDwkaoa/Xu+nq zcOteE4yj9GmAeOLanCXrpq2FmecRLBl5mQT3dcxmY3lNurOrazse8Zqf8D0au4dn6Op/7 Kmk5wjyRY5Us5u5JKz/RoGl44yRLQ7f89SzUHAU35OQM13hrAuVVN0O05DSzVMJdSLL6ns EQQmchz9Wkn0RtDfRXzaP55URrkUKPFJcrgX8sMOWu3B2oODlxs1RqzaVKyCpeDTqlmu/3 wNiGwgFU6XEwOkIsqJDKwo/K2WzVnUTyM/2U5L+r+U2anKfP14+kAXVTbr6PLw== Received: from beefy15.nyi.freebsd.org (beefy15.nyi.freebsd.org [IPv6:2610:1c1:1:6080::16:1e]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (Client did not present a certificate) by mxrelay.nyi.freebsd.org (Postfix) with ESMTPS id 4P6MmN0VGCzG24; Wed, 1 Feb 2023 13:13:08 +0000 (UTC) (envelope-from pkg-fallout@FreeBSD.org) Received: from beefy15.nyi.freebsd.org (localhost [127.0.0.1]) by beefy15.nyi.freebsd.org (8.16.1/8.16.1) with ESMTP id 311DD7kD080554; Wed, 1 Feb 2023 13:13:07 GMT (envelope-from pkg-fallout@FreeBSD.org) Received: (from root@localhost) by beefy15.nyi.freebsd.org (8.16.1/8.16.1/Submit) id 311DD7wb080553; Wed, 1 Feb 2023 13:13:07 GMT (envelope-from pkg-fallout@FreeBSD.org) Date: Wed, 1 Feb 2023 13:13:07 GMT From: pkg-fallout@FreeBSD.org Message-Id: <202302011313.311DD7wb080553@beefy15.nyi.freebsd.org> To: danfe@FreeBSD.org Subject: [package - 131i386-default][cad/zcad] Failed for zcad-qt5-0.9.8.5_7 in build Cc: pkg-fallout@FreeBSD.org X-ThisMailContainsUnwantedMimeParts: N List-Id: Fallout logs from package building List-Archive: https://lists.freebsd.org/archives/freebsd-pkg-fallout List-Help: List-Post: List-Subscribe: List-Unsubscribe: Sender: owner-freebsd-pkg-fallout@freebsd.org You are receiving this mail as a port that you maintain is failing to build on the FreeBSD package build server. Please investigate the failure and submit a PR to fix build. Maintainer: danfe@FreeBSD.org Log URL: https://pkg-status.freebsd.org/beefy15/data/131i386-default/8881966b49a8/logs/zcad-qt5-0.9.8.5_7.log Build URL: https://pkg-status.freebsd.org/beefy15/build.html?mastername=131i386-default&build=8881966b49a8 Log: =>> Building cad/zcad build started at Wed Feb 1 13:10:22 UTC 2023 port directory: /usr/ports/cad/zcad package name: zcad-qt5-0.9.8.5_7 building for: FreeBSD 131i386-default-job-07 13.1-RELEASE-p5 FreeBSD 13.1-RELEASE-p5 i386 maintained by: danfe@FreeBSD.org Makefile ident: Poudriere version: 3.2.8-23-ga7f8d188 Host OSVERSION: 1400073 Jail OSVERSION: 1301000 Job Id: 07 ---Begin Environment--- SHELL=/bin/csh UNAME_p=i386 UNAME_m=i386 OSVERSION=1301000 UNAME_v=FreeBSD 13.1-RELEASE-p5 UNAME_r=13.1-RELEASE-p5 BLOCKSIZE=K MAIL=/var/mail/root MM_CHARSET=UTF-8 LANG=C.UTF-8 STATUS=1 HOME=/root PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin LOCALBASE=/usr/local USER=root LIBEXECPREFIX=/usr/local/libexec/poudriere POUDRIERE_VERSION=3.2.8-23-ga7f8d188 MASTERMNT=/usr/local/poudriere/data/.m/131i386-default/ref POUDRIERE_BUILD_TYPE=bulk PACKAGE_BUILDING=yes SAVED_TERM= PWD=/usr/local/poudriere/data/.m/131i386-default/ref/.p/pool P_PORTS_FEATURES=FLAVORS SELECTED_OPTIONS MASTERNAME=131i386-default SCRIPTPREFIX=/usr/local/share/poudriere OLDPWD=/usr/local/poudriere/data/.m/131i386-default/ref/.p SCRIPTPATH=/usr/local/share/poudriere/bulk.sh POUDRIEREPATH=/usr/local/bin/poudriere ---End Environment--- ---Begin Poudriere Port Flags/Env--- PORT_FLAGS= PKGENV= FLAVOR=qt5 DEPENDS_ARGS= MAKE_ARGS= FLAVOR=qt5 ---End Poudriere Port Flags/Env--- ---Begin OPTIONS List--- ===> The following configuration options are available for zcad-qt5-0.9.8.5_7: DOCS=on: Build and/or install documentation ===> Use 'make config' to modify these settings ---End OPTIONS List--- --MAINTAINER-- danfe@FreeBSD.org --End MAINTAINER-- --CONFIGURE_ARGS-- --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- XDG_DATA_HOME=/wrkdirs/usr/ports/cad/zcad/work-qt5 XDG_CONFIG_HOME=/wrkdirs/usr/ports/cad/zcad/work-qt5 XDG_CACHE_HOME=/wrkdirs/usr/ports/cad/zcad/work-qt5/.cache HOME=/wrkdirs/usr/ports/cad/zcad/work-qt5 TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/cad/zcad/work-qt5/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin PKG_CONFIG_LIBDIR=/wrkdirs/usr/ports/cad/zcad/work-qt5/.pkgconfig:/usr/local/libdata/pkgconfig:/usr/local/share/pkgconfig:/usr/libdata/pkgconfig SHELL=/bin/sh CONFIG_SHELL=/bin/sh --End CONFIGURE_ENV-- --MAKE_ENV-- LAZBUILD_CMD="/usr/local/bin/lazbuild" LAZBUILD_ARGS="-d --pcp=/wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/tmppcp" LCL_PLATFORM="qt5" LAZARUS_DIR="/usr/local/share/lazarus-2.2.4" INSTANTFPCCACHE="/wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/.cache" XDG_DATA_HOME=/wrkdirs/usr/ports/cad/zcad/work-qt5 XDG_CONFIG_HOME=/wrkdirs/usr/ports/cad/zcad/work-qt5 XDG_CACHE_HOME=/wrkdirs/usr/ports/cad/zcad/work-qt5/.cache HOME=/wrkdirs/usr/ports/cad/zcad/work-qt5 TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/cad/zcad/work-qt5/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin PKG_CONFIG_LIBDIR=/wrkdirs/usr/ports/cad/zcad/work-qt5/.pkgconfig:/usr/local/libdata/pkgconfig:/usr/local/share/pkgconfig:/usr/libdata/pkgconfig MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES PREFIX=/usr/local LOCALBASE=/usr/local CC="cc" CFLAGS="-O2 -pipe -fstack-protector-strong -fno-strict-aliasing " CPP="cpp" CPPFLAGS="" LDFLAGS=" -fstack-protector-strong " LIBS="" CXX="c++" CXXFLAGS="-O2 -pipe -fstack-protector-strong -fno-strict-aliasing " MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- PORTDOCS="" OSREL=13.1 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local LIB32DIR=lib DOCSDIR="share/doc/zcad" EXAMPLESDIR="share/examples/zcad" DATADIR="share/zcad" WWWDIR="www/zcad" ETCDIR="etc/zcad" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/zcad DOCSDIR=/usr/local/share/doc/zcad EXAMPLESDIR=/usr/local/share/examples/zcad WWWDIR=/usr/local/www/zcad ETCDIR=/usr/local/etc/zcad --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles PACKAGE_BUILDING=yes PACKAGE_BUILDING_FLAVORS=yes MACHINE=i386 MACHINE_ARCH=i386 ARCH=${MACHINE_ARCH} #### /usr/local/etc/poudriere.d/make.conf #### # XXX: We really need this but cannot use it while 'make checksum' does not # try the next mirror on checksum failure. It currently retries the same # failed mirror and then fails rather then trying another. It *does* # try the next if the size is mismatched though. #MASTER_SITE_FREEBSD=yes # Build ALLOW_MAKE_JOBS_PACKAGES with 2 jobs MAKE_JOBS_NUMBER=2 #### /usr/ports/Mk/Scripts/ports_env.sh #### _CCVERSION_921dbbb2=FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) Target: i386-unknown-freebsd13.1 Thread model: posix InstalledDir: /usr/bin _ALTCCVERSION_921dbbb2=none _CXXINTERNAL_acaad9ca=FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) Target: i386-unknown-freebsd13.1 Thread model: posix InstalledDir: /usr/bin "/usr/bin/ld" "--eh-frame-hdr" "-dynamic-linker" "/libexec/ld-elf.so.1" "--hash-style=both" "--enable-new-dtags" "-m" "elf_i386_fbsd" "-o" "a.out" "/usr/lib/crt1.o" "/usr/lib/crti.o" "/usr/lib/crtbegin.o" "-L/usr/lib" "/dev/null" "-lc++" "-lm" "-lgcc" "--as-needed" "-lgcc_s" "--no-as-needed" "-lc" "-lgcc" "--as-needed" "-lgcc_s" "--no-as-needed" "/usr/lib/crtend.o" "/usr/lib/crtn.o" CC_OUTPUT_921dbbb2_58173849=yes CC_OUTPUT_921dbbb2_9bdba57c=yes CC_OUTPUT_921dbbb2_6a4fe7f5=yes CC_OUTPUT_921dbbb2_6bcac02b=yes CC_OUTPUT_921dbbb2_67d20829=yes CC_OUTPUT_921dbbb2_bfa62e83=yes CC_OUTPUT_921dbbb2_f0b4d593=yes CC_OUTPUT_921dbbb2_308abb44=yes CC_OUTPUT_921dbbb2_f00456e5=yes CC_OUTPUT_921dbbb2_65ad290d=yes CC_OUTPUT_921dbbb2_f2776b26=yes CC_OUTPUT_921dbbb2_53255a77=yes CC_OUTPUT_921dbbb2_911cfe02=yes CC_OUTPUT_921dbbb2_b2657cc3=yes CC_OUTPUT_921dbbb2_380987f7=yes CC_OUTPUT_921dbbb2_160933ec=yes CC_OUTPUT_921dbbb2_fb62803b=yes CC_OUTPUT_921dbbb2_af59ad06=yes CC_OUTPUT_921dbbb2_a15f3fcf=yes _OBJC_CCVERSION_921dbbb2=FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) Target: i386-unknown-freebsd13.1 Thread model: posix InstalledDir: /usr/bin _OBJC_ALTCCVERSION_921dbbb2=none ARCH=i386 OPSYS=FreeBSD _OSRELEASE=13.1-RELEASE-p5 OSREL=13.1 OSVERSION=1301000 PYTHONBASE=/usr/local CONFIGURE_MAX_CMD_LEN=524288 HAVE_PORTS_ENV=1 #### Misc Poudriere #### GID=0 UID=0 ---End make.conf--- --Resource limits-- cpu time (seconds, -t) unlimited file size (512-blocks, -f) unlimited data seg size (kbytes, -d) 524288 stack size (kbytes, -s) 65536 core file size (512-blocks, -c) unlimited max memory size (kbytes, -m) unlimited locked memory (kbytes, -l) unlimited max user processes (-u) 89999 open files (-n) 1024 virtual mem size (kbytes, -v) unlimited swap limit (kbytes, -w) unlimited socket buffer size (bytes, -b) unlimited pseudo-terminals (-p) unlimited kqueues (-k) unlimited umtx shared locks (-o) unlimited --End resource limits-- =================================================== =========================================================================== =================================================== ===> zcad-qt5-0.9.8.5_7 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.19.0.pkg [131i386-default-job-07] Installing pkg-1.19.0... [131i386-default-job-07] Extracting pkg-1.19.0: .......... done ===> zcad-qt5-0.9.8.5_7 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of zcad-qt5-0.9.8.5_7 =========================================================================== =================================================== =========================================================================== =================================================== ===> Fetching all distfiles required by zcad-qt5-0.9.8.5_7 for building =========================================================================== =================================================== ===> Fetching all distfiles required by zcad-qt5-0.9.8.5_7 for building => SHA256 Checksum OK for zamtmn-zcad-0.9.8.5-8b8a693_GH0.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Fetching all distfiles required by zcad-qt5-0.9.8.5_7 for building ===> Extracting for zcad-qt5-0.9.8.5_7 => SHA256 Checksum OK for zamtmn-zcad-0.9.8.5-8b8a693_GH0.tar.gz. =========================================================================== =================================================== =========================================================================== =================================================== ===> Patching for zcad-qt5-0.9.8.5_7 ===> Converting DOS text files to UNIX text files ===> Applying FreeBSD patches for zcad-qt5-0.9.8.5_7 from /usr/ports/cad/zcad/files =========================================================================== =================================================== ===> zcad-qt5-0.9.8.5_7 depends on file: /usr/local/bin/as - not found ===> Installing existing package /packages/All/binutils-2.39,1.pkg [131i386-default-job-07] Installing binutils-2.39,1... [131i386-default-job-07] `-- Installing gettext-runtime-0.21.1... [131i386-default-job-07] | `-- Installing indexinfo-0.3.1... [131i386-default-job-07] | `-- Extracting indexinfo-0.3.1: .... done [131i386-default-job-07] `-- Extracting gettext-runtime-0.21.1: .......... done [131i386-default-job-07] Extracting binutils-2.39,1: .......... done ===> zcad-qt5-0.9.8.5_7 depends on file: /usr/local/bin/as - found ===> Returning to build of zcad-qt5-0.9.8.5_7 (3104) Compiling ./autogenerated/aregGDBObjText.pas (3104) Compiling ./autogenerated/aregGDBObjMText.pas (3104) Compiling ./autogenerated/aregGDBObjPoint.pas (3104) Compiling ./autogenerated/aregGDBObjPolyline.pas (3104) Compiling ./autogenerated/aregGDBObjSpline.pas (3104) Compiling ./zengine/core/entities/uzeentspline.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zengine/core/entities/uzeentspline.pas(130,6) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zengine/core/entities/uzeentspline.pas(175,11) Note: (6058) Call to subroutine "function VectorTransform(const V:GDBvertex4D;const M:DMatrix4D):;" marked as inline is not inlined (3104) Compiling ./autogenerated/aregGDBObjRoot.pas (3104) Compiling ./autogenerated/aregGDBObjCamera.pas (3104) Compiling ./autogenerated/aregDbBaseObject.pas (3104) Compiling ./autogenerated/aregDeviceDbBaseObject.pas (3104) Compiling ./zcad/devicebase/uzcdevicebase.pas (3104) Compiling ./other/csvdocument.pas /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/gvector.ppu:gvector.pp(101,22) Note: (6058) Call to subroutine "function TVector.Size:DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/gvector.ppu:gvector.pp(104,34) Note: (6058) Call to subroutine "function TVector.Size:DWord;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/devicebase/uzcdevicebase.pas(98,61) Warning: (4066) Arithmetic "+" on untyped pointer is unportable to {$T+}, suggest typecast /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/devicebase/uzcdevicebase.pas(118,56) Warning: (4066) Arithmetic "+" on untyped pointer is unportable to {$T+}, suggest typecast (3104) Compiling ./autogenerated/aregElDeviceBaseObject.pas (3104) Compiling ./autogenerated/aregCableDeviceBaseObject.pas (3104) Compiling ./autogenerated/aregTZCADDrawingsManager.pas (3104) Compiling ./zcad/commands/uzccommand_ondrawinged.pas (3104) Compiling ./zengine/zgl/drawers/uzgldrawercanvas.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zengine/zgl/drawers/uzgldrawercanvas.pas(192,3) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined (3104) Compiling ./zcad/commands/uzccomdrawdase.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccomdrawdase.pas(155,3) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_ondrawinged.pas(262,3) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined (3104) Compiling ./zcad/commands/uzccommand_stretch.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_stretch.pas(142,3) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined (3104) Compiling ./zcad/commands/uzccommand_selsim.pas (3104) Compiling ./zengine/containers/uzctnrvectorobjid.pas (3104) Compiling ./zengine/containers/uzctnrvectorgdbdouble.pas (3104) Compiling ./zengine/containers/uzctnrvectorgdblineweight.pas (3104) Compiling ./zengine/containers/uzctnrvectorgdbpalettecolor.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_selsim.pas(307,3) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined (3104) Compiling ./zcad/commands/uzccomdraw.pas (3104) Compiling ./zcad/core/undostack/zcmultiobjectchangeundocommand.pas (3104) Compiling ./zcad/commands/uzccommand_move.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_move.pas(241,3) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_move.pas(25,21) Hint: (5023) Unit "zcmultiobjectcreateundocommand" not used in uzccommand_move /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_move.pas(37,12) Hint: (5023) Unit "uzcutils" not used in uzccommand_move /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_move.pas(47,13) Hint: (5023) Unit "uzeentsubordinated" not used in uzccommand_move (3104) Compiling ./zcad/commands/uzccommand_copy.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_copy.pas(115,3) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined (3104) Compiling ./zengine/core/entities/uzeenttable.pas (3104) Compiling ./zengine/containers/UGDBTable.pas ./components/zcontainers/lib/i386-freebsd/gzctnrvectorpdata.ppu:gzctnrvectorpdata.pas(27,40) Note: (5071) Private type "GZVectorPData$2.TData" never used /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/gvector.ppu:gvector.pp(101,22) Note: (6058) Call to subroutine "function TVector.Size:DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/gvector.ppu:gvector.pp(104,34) Note: (6058) Call to subroutine "function TVector.Size:DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/garrayutils.ppu:garrayutils.pp(190,10) Note: (6058) Call to subroutine "function TOrderingArrayUtils,uzccomdraw.taxisdesc,uzccomdraw.TGDBtaxisdescLess>.Left(a:LongWord):DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/garrayutils.ppu:garrayutils.pp(194,10) Note: (6058) Call to subroutine "function TOrderingArrayUtils,uzccomdraw.taxisdesc,uzccomdraw.TGDBtaxisdescLess>.Right(a:LongWord):DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/garrayutils.ppu:garrayutils.pp(204,8) Note: (6058) Call to subroutine "function TOrderingArrayUtils,uzccomdraw.taxisdesc,uzccomdraw.TGDBtaxisdescLess>.Parent(a:LongWord):DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/garrayutils.ppu:garrayutils.pp(211,10) Note: (6058) Call to subroutine "function TOrderingArrayUtils,uzccomdraw.taxisdesc,uzccomdraw.TGDBtaxisdescLess>.Parent(a:LongWord):DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/gvector.ppu:gvector.pp(101,22) Note: (6058) Call to subroutine "function TVector.Size:DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/gvector.ppu:gvector.pp(104,34) Note: (6058) Call to subroutine "function TVector.Size:DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/gvector.ppu:gvector.pp(101,22) Note: (6058) Call to subroutine "function TVector.Size:DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/gvector.ppu:gvector.pp(104,34) Note: (6058) Call to subroutine "function TVector.Size:DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/gvector.ppu:gvector.pp(101,22) Note: (6058) Call to subroutine "function TVector.Size:DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/gvector.ppu:gvector.pp(104,34) Note: (6058) Call to subroutine "function TVector.Size:DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/garrayutils.ppu:garrayutils.pp(190,10) Note: (6058) Call to subroutine "function TOrderingArrayUtils,uzbtypesbase.GDBDouble,uzccomdraw.TLess>.Left(a:LongWord):DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/garrayutils.ppu:garrayutils.pp(194,10) Note: (6058) Call to subroutine "function TOrderingArrayUtils,uzbtypesbase.GDBDouble,uzccomdraw.TLess>.Right(a:LongWord):DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/garrayutils.ppu:garrayutils.pp(204,8) Note: (6058) Call to subroutine "function TOrderingArrayUtils,uzbtypesbase.GDBDouble,uzccomdraw.TLess>.Parent(a:LongWord):DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/garrayutils.ppu:garrayutils.pp(211,10) Note: (6058) Call to subroutine "function TOrderingArrayUtils,uzbtypesbase.GDBDouble,uzccomdraw.TLess>.Parent(a:LongWord):DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/gset.ppu:gset.pp(514,11) Note: (6058) Call to subroutine "function TSetIterator.MoveNext:Boolean;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/gset.ppu:gset.pp(256,20) Note: (6058) Call to subroutine "function TSet>>.Min(nod:TSet$2$crc287D2BC6.PNode):^TSet$2$crc287D2BC6.Node;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/gset.ppu:gset.pp(274,8) Note: (6058) Call to subroutine "function TSet>>.NFind(value:TMap$3$crc8DE4CB62.TPair):^TSet$2$crc287D2BC6.Node;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/gset.ppu:gset.pp(298,8) Note: (6058) Call to subroutine "function TSet>>.NFindLess(value:TMap$3$crc8DE4CB62.TPair):^TSet$2$crc287D2BC6.Node;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/gset.ppu:gset.pp(324,8) Note: (6058) Call to subroutine "function TSet>>.NFindLessEqual(value:TMap$3$crc8DE4CB62.TPair):^TSet$2$crc287D2BC6.Node;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/gset.ppu:gset.pp(350,8) Note: (6058) Call to subroutine "function TSet>>.NFindGreater(value:TMap$3$crc8DE4CB62.TPair):^TSet$2$crc287D2BC6.Node;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/gset.ppu:gset.pp(376,8) Note: (6058) Call to subroutine "function TSet>>.NFindGreaterEqual(value:TMap$3$crc8DE4CB62.TPair):^TSet$2$crc287D2BC6.Node;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/gset.ppu:gset.pp(478,8) Note: (6058) Call to subroutine "function TSet>>.NMin:^TSet$2$crc287D2BC6.Node;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/garrayutils.ppu:garrayutils.pp(190,10) Note: (6058) Call to subroutine "function TOrderingArrayUtils,uzccomdraw.tdevcoord,uzccomdraw.TGDBVertexLess>.Left(a:LongWord):DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/garrayutils.ppu:garrayutils.pp(194,10) Note: (6058) Call to subroutine "function TOrderingArrayUtils,uzccomdraw.tdevcoord,uzccomdraw.TGDBVertexLess>.Right(a:LongWord):DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/garrayutils.ppu:garrayutils.pp(204,8) Note: (6058) Call to subroutine "function TOrderingArrayUtils,uzccomdraw.tdevcoord,uzccomdraw.TGDBVertexLess>.Parent(a:LongWord):DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/garrayutils.ppu:garrayutils.pp(211,10) Note: (6058) Call to subroutine "function TOrderingArrayUtils,uzccomdraw.tdevcoord,uzccomdraw.TGDBVertexLess>.Parent(a:LongWord):DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/garrayutils.ppu:garrayutils.pp(190,10) Note: (6058) Call to subroutine "function TOrderingArrayUtils,uzccomdraw.tdevname,uzccomdraw.TGDBNameLess>.Left(a:LongWord):DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/garrayutils.ppu:garrayutils.pp(194,10) Note: (6058) Call to subroutine "function TOrderingArrayUtils,uzccomdraw.tdevname,uzccomdraw.TGDBNameLess>.Right(a:LongWord):DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/garrayutils.ppu:garrayutils.pp(204,8) Note: (6058) Call to subroutine "function TOrderingArrayUtils,uzccomdraw.tdevname,uzccomdraw.TGDBNameLess>.Parent(a:LongWord):DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/garrayutils.ppu:garrayutils.pp(211,10) Note: (6058) Call to subroutine "function TOrderingArrayUtils,uzccomdraw.tdevname,uzccomdraw.TGDBNameLess>.Parent(a:LongWord):DWord;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccomdraw.pas(1525,23) Hint: (5091) Local variable "s" of a managed type does not seem to be initialized /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccomdraw.pas(2459,46) Note: (6058) Call to subroutine "function VertexMulOnSc(const Vector1:GDBvertex;sc:GDBDouble):;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccomdraw.pas(2568,46) Note: (6058) Call to subroutine "function VertexMulOnSc(const Vector1:GDBvertex;sc:GDBDouble):;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccomdraw.pas(2945,29) Note: (6058) Call to subroutine "function TSet>>.Min(nod:TSet$2$crc287D2BC6.PNode):^TSet$2$crc287D2BC6.Node;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccomdraw.pas(3022,7) Note: (6058) Call to subroutine "function TSet>>.NMin:^TSet$2$crc287D2BC6.Node;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccomdraw.pas(3022,7) Note: (6058) Call to subroutine "function TMapIterator,uzccomdraw.TMap$3$crc8DE4CB62.TPair,uzccomdraw.TSet$2$crc287D2BC6.Node>.Next:Boolean;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccomdraw.pas(3143,3) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined (3104) Compiling ./zcad/commands/uzccommand_3dpoly.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(166,3) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(24,3) Hint: (5023) Unit "gzctnrvector" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(24,16) Hint: (5023) Unit "uzglviewareageneral" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(24,63) Hint: (5023) Unit "zcmultiobjectchangeundocommand" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(25,3) Hint: (5023) Unit "gzctnrvectortypes" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(25,52) Hint: (5023) Unit "uzeentitiesmanager" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(26,21) Hint: (5023) Unit "uzcenitiesvariablesextender" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(27,3) Hint: (5023) Unit "uzctextenteditor" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(27,36) Hint: (5023) Unit "usimplegenerics" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(28,15) Hint: (5023) Unit "uzeentitiestree" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(28,31) Hint: (5023) Unit "gmap" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(28,36) Hint: (5023) Unit "gvector" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(28,44) Hint: (5023) Unit "garrayutils" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(28,56) Hint: (5023) Unit "gutil" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(28,62) Hint: (5023) Unit "UGDBSelectedObjArray" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(30,34) Hint: (5023) Unit "uzeentwithlocalcs" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(31,46) Hint: (5023) Unit "uzeentabstracttext" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(31,65) Hint: (5023) Unit "uzestylestexts" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(47,13) Hint: (5023) Unit "uzeentsubordinated" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(47,72) Hint: (5023) Unit "gzctnrvectordata" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(48,3) Hint: (5023) Unit "Math" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(48,8) Hint: (5023) Unit "uzeenttable" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(48,20) Hint: (5023) Unit "uzctnrvectorgdbstring" not used in uzccommand_3dpoly /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_3dpoly.pas(49,105) Hint: (5023) Unit "UGDBVisibleTreeArray" not used in uzccommand_3dpoly (3104) Compiling ./zcad/commands/uzccommand_print.pas (3104) Compiling ./zengine/misc/uzeiopalette.pas /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/gvector.ppu:gvector.pp(101,22) Note: (6058) Call to subroutine "function TVector.Size:DWord;" marked as inline is not inlined /usr/local/lib/fpc/3.2.2/units/i386-freebsd/fcl-stl/gvector.ppu:gvector.pp(104,34) Note: (6058) Call to subroutine "function TVector.Size:DWord;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zengine/misc/uzeiopalette.pas(46,5) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined (3104) Compiling ./zengine/core/utils/uzerasterizer.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zengine/core/utils/uzerasterizer.pas(124,20) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_print.pas(188,3) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_print.pas(191,3) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_print.pas(24,3) Hint: (5023) Unit "uzgldrawerabstract" not used in uzccommand_print /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_print.pas(27,3) Hint: (5023) Unit "uzgldrawcontext" not used in uzccommand_print /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_print.pas(45,50) Hint: (5023) Unit "uzeentgenericsubentry" not used in uzccommand_print /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_print.pas(48,93) Hint: (5023) Unit "UGDBVisibleTreeArray" not used in uzccommand_print /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_print.pas(49,49) Hint: (5023) Unit "uzeconsts" not used in uzccommand_print (3104) Compiling ./zcad/commands/uzccommand_blockpreviewexport.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_blockpreviewexport.pas(59,4) Note: (5025) Local variable "domethod" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_blockpreviewexport.pas(59,13) Note: (5025) Local variable "undomethod" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_blockpreviewexport.pas(177,3) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_blockpreviewexport.pas(180,3) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_blockpreviewexport.pas(24,3) Hint: (5023) Unit "uzgldrawerabstract" not used in uzccommand_blockpreviewexport /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_blockpreviewexport.pas(29,31) Hint: (5023) Unit "uzcstrconsts" not used in uzccommand_blockpreviewexport /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_blockpreviewexport.pas(30,3) Hint: (5023) Unit "PrintersDlgs" not used in uzccommand_blockpreviewexport /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_blockpreviewexport.pas(40,3) Hint: (5023) Unit "uzglviewareadata" not used in uzccommand_blockpreviewexport /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_blockpreviewexport.pas(47,3) Hint: (5023) Unit "Math" not used in uzccommand_blockpreviewexport /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_blockpreviewexport.pas(47,8) Hint: (5023) Unit "zcmultiobjectcreateundocommand" not used in uzccommand_blockpreviewexport /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccommand_blockpreviewexport.pas(47,39) Hint: (5023) Unit "uzcdrawing" not used in uzccommand_blockpreviewexport (3104) Compiling ./zcad/commands/uzccommand_layoff.pas (3104) Compiling ./zcad/commands/uzccomexample.pas (3104) Compiling ./zcad/commands/uzccominteractivemanipulators.pas (3104) Compiling ./zcad/electrotech/uzcentcable.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/electrotech/uzcentcable.pas(410,10) Note: (6058) Call to subroutine "function VectorTransform(const V:GDBvertex4D;const M:DMatrix4D):;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/electrotech/uzcentcable.pas(411,10) Note: (6058) Call to subroutine "function VectorTransform(const V:GDBvertex4D;const M:DMatrix4D):;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/electrotech/uzcentcable.pas(559,3) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined (3104) Compiling ./zcad/velec/uzventsuperline.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/velec/uzventsuperline.pas(123,3) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccomexample.pas(846,5) Note: (5025) Local variable "polyLWObj" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccomexample.pas(847,5) Note: (5025) Local variable "polyObj" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccomexample.pas(997,5) Note: (5025) Local variable "ir" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/commands/uzccomexample.pas(1000,5) Note: (5025) Local variable "UndoStartMarkerPlaced" not used (1010) Writing Resource String Table file: uzccomexample.rsj (3104) Compiling ./zcad/commands/uzccomobjectinspector.pas (3104) Compiling ./zcad/uzcplugins.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/uzcplugins.pas(154,3) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined (3104) Compiling ./zcad/core/uzctextpreprocessorimpl.pas (3104) Compiling ./zcad/entities/uzcvariablesutils.pas (3104) Compiling ./zcad/entities/uzcpropertiesutils.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/entities/uzcpropertiesutils.pas(34,3) Note: (5025) Local variable "ChangedData" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/entities/uzcpropertiesutils.pas(25,13) Hint: (5023) Unit "gzctnrvectortypes" not used in uzcpropertiesutils /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/core/uzctextpreprocessorimpl.pas(48,22) Warning: (5089) Local variable "varname" of a managed type does not seem to be initialized /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/core/uzctextpreprocessorimpl.pas(38,3) Note: (5025) Local variable "endpos" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/core/uzctextpreprocessorimpl.pas(78,9) Note: (5025) Local variable "s1" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/core/uzctextpreprocessorimpl.pas(78,12) Note: (5025) Local variable "s2" not used /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/core/uzctextpreprocessorimpl.pas(24,38) Hint: (5023) Unit "uzcenitiesvariablesextender" not used in uzctextpreprocessorimpl /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/core/uzctextpreprocessorimpl.pas(24,66) Hint: (5023) Unit "uzeentsubordinated" not used in uzctextpreprocessorimpl (3104) Compiling ./zcad/entities/uzcregisterenitiesfeatures.pas (3104) Compiling ./zcad/core/devices.pas (3104) Compiling ./zcad/commands/uzccomdb.pas (3104) Compiling ./zcad/electrotech/uzcentnet.pas (3104) Compiling ./zengine/containers/UGDBGraf.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/electrotech/uzcentnet.pas(149,20) Note: (6058) Call to subroutine "function VertexMulOnSc(const Vector1:GDBvertex;sc:GDBDouble):;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/electrotech/uzcentnet.pas(606,3) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined (1010) Writing Resource String Table file: uzcentnet.rsj /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/entities/uzcregisterenitiesfeatures.pas(203,17) Note: (6058) Call to subroutine "function TSet>>.NFind(value:TMap$3$crcA14D2CAD.TPair):^TSet$2$crcB5B2B9C5.Node;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/entities/uzcregisterenitiesfeatures.pas(203,17) Note: (6058) Call to subroutine "function TSet>>.NInsert(value:TMap$3$crcA14D2CAD.TPair):^TSet$2$crcB5B2B9C5.Node;" marked as inline is not inlined (3104) Compiling ./zcad/entities/uzcregisterenitiesextenders.pas (3104) Compiling ./zcad/gui/odjectinspector/uzcoiregistermultiproperties.pas (3104) Compiling ./zcad/electrotech/uzcentelleader.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/electrotech/uzcentelleader.pas(102,31) Note: (6058) Call to subroutine "function VectorTransform(const V:GDBvertex4D;const M:DMatrix4D):;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/electrotech/uzcentelleader.pas(103,29) Note: (6058) Call to subroutine "function VectorTransform(const V:GDBvertex4D;const M:DMatrix4D):;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/gui/odjectinspector/uzcoiregistermultiproperties.pas(338,221) Note: (6058) Call to subroutine "function CreateAffineRotationMatrix(const anAxis:GDBvertex;angle:Double):Array[0..3] Of DVector4D;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/gui/odjectinspector/uzcoiregistermultiproperties.pas(338,56) Note: (6058) Call to subroutine "function VectorTransform(const V:GDBvertex4D;const M:DMatrix4D):;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/gui/odjectinspector/uzcoiregistermultiproperties.pas(579,3) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined (3104) Compiling ./zcad/entities/uzclibraryblocksregister.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zcad/entities/uzclibraryblocksregister.pas(68,3) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined (3104) Compiling ./zengine/zgl/drawers/uzglviewareaogl.pas (3104) Compiling ./zengine/zgl/drawers/uzgldrawerogl.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zengine/zgl/drawers/uzgldrawerogl.pas(481,49) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/./zengine/zgl/drawers/uzgldrawerogl.pas(607,3) Note: (6058) Call to subroutine "function GetDebugLogger:TLazLogger;" marked as inline is not inlined (3104) Compiling openglcontext.pas (3104) Compiling glqtcontext.pas /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/glqtcontext.pas(30,23) Fatal: (10022) Can't find unit qlclopenglwidget used by GLQTContext Fatal: (1018) Compilation aborted Error: /usr/local/bin/ppc386 returned an error exitcode Error: (lazarus) Compile Project, Mode: Default, Target: /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad/bin/i386-freebsd/zcad: stopped with exit code 1 Error: (lazbuild) failed compiling of project /wrkdirs/usr/ports/cad/zcad/work-qt5/zcad-8b8a693/cad_source/zcad.lpi *** Error code 2 Stop. make: stopped in /usr/ports/cad/zcad