From nobody Thu Dec 14 20:26:11 2023 X-Original-To: pkg-fallout@mlmmj.nyi.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mlmmj.nyi.freebsd.org (Postfix) with ESMTP id 4SrkQD0dJbz53jwv for ; Thu, 14 Dec 2023 20:26:12 +0000 (UTC) (envelope-from pkg-fallout@FreeBSD.org) Received: from mxrelay.nyi.freebsd.org (mxrelay.nyi.freebsd.org [IPv6:2610:1c1:1:606c::19:3]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256 client-signature RSA-PSS (4096 bits) client-digest SHA256) (Client CN "mxrelay.nyi.freebsd.org", Issuer "R3" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 4SrkQC4vD1z4VG5 for ; Thu, 14 Dec 2023 20:26:11 +0000 (UTC) (envelope-from pkg-fallout@FreeBSD.org) ARC-Seal: i=1; s=dkim; d=freebsd.org; t=1702585571; a=rsa-sha256; cv=none; b=ja5AKsRIhd5jxRuL8RZ131LkFvqqOuhbA4ZMvZchHiPwfU9y1sCVor3VVYodmz86cWcM6E dsjyMDsjH8HUzHI460IUbf4esMrbgTVT0LOHRZzus0KODxyooAI9/JjPtAPyEz3UKIJKKj Sd/u5+q+9WLVDULKn7kIDaxCyCgUPAhguq5MZDGHISNr5Trw9MwWr1tNTwgv9WKt6E1+1r wGKSYNBMNYfQFeRTzpLm9bVYIGUIcdYaBR19z53eKH2oNcnFZvejfJf1o/npOHa2cC2rfb 3PYYsY+y9DrZX+ITR3wBI/ZhuYvELMhbo116hAWkkhUMft4C2WWFaz4XQBYUjA== ARC-Authentication-Results: i=1; mx1.freebsd.org; none ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=freebsd.org; s=dkim; t=1702585571; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc; bh=BR39/S7MAdyCdBmrrITxafWtZRE3FIaGRrgUjkUS6bM=; b=izp75VJW9WdeyMebcxLa5Dvq6NfWi1Vy2bkfU0GemOb0Ih4URVqk6DcxuOQlMUS7GjPVS0 htp1bv6/tALlubOk4QkHgla33ODAklV93XHucyVzGxY17iBiQeuAGWezAcBtZZ1V4+jcDr Sb283KcFY8rLcjCoz5iH/2QJ/whthmRNvhzOG9VgBM4ALBLxSasc58fZJe01hHcv+6UQui 1co3IHhhqORvWdCfksicuz42uyS8vGBDU51XVDf4WZiKc7kYAef4XUL9GM2WvIjNaP/EOI l/yivpBZ5s3tHd7z6UWoFGxmhs72Pl/kEkXHl+Jl1eRChvpdZ0NL98nqlKDLbQ== Received: from beefy11.nyi.freebsd.org (beefy11.nyi.freebsd.org [IPv6:2610:1c1:1:6080::16:1a]) by mxrelay.nyi.freebsd.org (Postfix) with ESMTP id 4SrkQC3sgPzhpB for ; Thu, 14 Dec 2023 20:26:11 +0000 (UTC) (envelope-from pkg-fallout@FreeBSD.org) Received: from root (uid 0) (envelope-from pkg-fallout@FreeBSD.org) id 3cb by beefy11.nyi.freebsd.org (DragonFly Mail Agent v0.13+ on beefy11.nyi.freebsd.org); Thu, 14 Dec 2023 20:26:11 +0000 To: teodorsigaev@gmail.com Subject: [package - 140i386-default][cad/PrusaSlicer] Failed for PrusaSlicer-2.6.0_6 in build Cc: pkg-fallout@FreeBSD.org Date: Thu, 14 Dec 2023 20:26:11 +0000 Message-Id: <657b64e3.3cb.28e56bce@beefy11.nyi.freebsd.org> From: List-Id: Fallout logs from package building List-Archive: https://lists.freebsd.org/archives/freebsd-pkg-fallout List-Help: List-Post: List-Subscribe: List-Unsubscribe: Sender: owner-freebsd-pkg-fallout@freebsd.org You are receiving this mail as a port that you maintain is failing to build on the FreeBSD package build server. Please investigate the failure and submit a PR to fix build. Maintainer: teodorsigaev@gmail.com Log URL: https://pkg-status.freebsd.org/beefy11/data/140i386-default/8e6cecbea178/logs/PrusaSlicer-2.6.0_6.log Build URL: https://pkg-status.freebsd.org/beefy11/build.html?mastername=140i386-default&build=8e6cecbea178 Log: =>> Building cad/PrusaSlicer build started at Thu Dec 14 20:13:16 UTC 2023 port directory: /usr/ports/cad/PrusaSlicer package name: PrusaSlicer-2.6.0_6 building for: FreeBSD 140i386-default-job-05 14.0-RELEASE-p2 FreeBSD 14.0-RELEASE-p2 i386 maintained by: teodorsigaev@gmail.com Makefile datestamp: -rw-r--r-- 1 root wheel 1495 Nov 30 01:01 /usr/ports/cad/PrusaSlicer/Makefile Ports top last git commit: 8e6cecbea1 Ports top unclean checkout: no Port dir last git commit: cf5d9b8b96 Port dir unclean checkout: no Poudriere version: poudriere-git-3.4.0 Host OSVERSION: 1500006 Jail OSVERSION: 1400097 Job Id: 05 ---Begin Environment--- SHELL=/bin/sh BLOCKSIZE=K MAIL=/var/mail/root MM_CHARSET=UTF-8 LANG=C.UTF-8 OSVERSION=1400097 STATUS=1 HOME=/root PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin MAKE_OBJDIR_CHECK_WRITABLE=0 UNAME_m=i386 UNAME_p=i386 UNAME_r=14.0-RELEASE-p2 LOCALBASE=/usr/local UNAME_v=FreeBSD 14.0-RELEASE-p2 USER=root POUDRIERE_NAME=poudriere-git LIBEXECPREFIX=/usr/local/libexec/poudriere POUDRIERE_VERSION=3.4.0 MASTERMNT=/usr/local/poudriere/data/.m/140i386-default/ref LC_COLLATE=C POUDRIERE_BUILD_TYPE=bulk PACKAGE_BUILDING=yes SAVED_TERM= OUTPUT_REDIRECTED_STDERR=4 OUTPUT_REDIRECTED=1 PWD=/usr/local/poudriere/data/.m/140i386-default/05/.p OUTPUT_REDIRECTED_STDOUT=3 P_PORTS_FEATURES=FLAVORS SELECTED_OPTIONS MASTERNAME=140i386-default SCRIPTPREFIX=/usr/local/share/poudriere SCRIPTNAME=bulk.sh OLDPWD=/usr/local/poudriere/data/.m/140i386-default/ref/.p/pool POUDRIERE_PKGNAME=poudriere-git-3.4.0 SCRIPTPATH=/usr/local/share/poudriere/bulk.sh POUDRIEREPATH=/usr/local/bin/poudriere ---End Environment--- ---Begin Poudriere Port Flags/Env--- PORT_FLAGS= PKGENV= FLAVOR= MAKE_ARGS= ---End Poudriere Port Flags/Env--- ---Begin OPTIONS List--- ---End OPTIONS List--- --MAINTAINER-- teodorsigaev@gmail.com --End MAINTAINER-- --CONFIGURE_ARGS-- --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- PKG_CONFIG=pkgconf XDG_DATA_HOME=/wrkdirs/usr/ports/cad/PrusaSlicer/work XDG_CONFIG_HOME=/wrkdirs/usr/ports/cad/PrusaSlicer/work XDG_CACHE_HOME=/wrkdirs/usr/ports/cad/PrusaSlicer/work/.cache HOME=/wrkdirs/usr/ports/cad/PrusaSlicer/work TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/cad/PrusaSlicer/work/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin PKG_CONFIG_LIBDIR=/wrkdirs/usr/ports/cad/PrusaSlicer/work/.pkgconfig:/usr/local/libdata/pkgconfig:/usr/local/share/pkgconfig:/usr/libdata/pkgconfig SHELL=/bin/sh CONFIG_SHELL=/bin/sh WX_CONFIG=/usr/local/bin/wxgtk3u-3.2-config LANG=en_US.UTF-8 LC_ALL=en_US.UTF-8 --End CONFIGURE_ENV-- --MAKE_ENV-- NINJA_STATUS="[%p %s/%t] " XDG_DATA_HOME=/wrkdirs/usr/ports/cad/PrusaSlicer/work XDG_CONFIG_HOME=/wrkdirs/usr/ports/cad/PrusaSlicer/work XDG_CACHE_HOME=/wrkdirs/usr/ports/cad/PrusaSlicer/work/.cache HOME=/wrkdirs/usr/ports/cad/PrusaSlicer/work TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/cad/PrusaSlicer/work/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin PKG_CONFIG_LIBDIR=/wrkdirs/usr/ports/cad/PrusaSlicer/work/.pkgconfig:/usr/local/libdata/pkgconfig:/usr/local/share/pkgconfig:/usr/libdata/pkgconfig MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES DESTDIR=/wrkdirs/usr/ports/cad/PrusaSlicer/work/stage WX_CONFIG=/usr/local/bin/wxgtk3u-3.2-config LANG=en_US.UTF-8 LC_ALL=en_US.UTF-8 PREFIX=/usr/local LOCALBASE=/usr/local CC="cc" CFLAGS="-O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing " CPP="cpp" CPPFLAGS="-DLIBICONV_PLUG" LDFLAGS=" -fstack-protector-strong " LIBS="" CXX="c++" CXXFLAGS="-O2 -pipe -DLIBICONV_PL UG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG " MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD_INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- CMAKE_BUILD_TYPE="release" GTK2_VERSION="2.10.0" GTK3_VERSION="3.0.0" GTK4_VERSION="4.0.0" OSREL=14.0 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local LIB32DIR=lib DOCSDIR="share/doc/PrusaSlicer" EXAMPLESDIR="share/examples/PrusaSlicer" DATADIR="share/PrusaSlicer" WWWDIR="www/PrusaSlicer" ETCDIR="etc/PrusaSlicer" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/PrusaSlicer DOCSDIR=/usr/local/share/doc/PrusaSlicer EXAMPLESDIR=/usr/local/share/examples/PrusaSlicer WWWDIR=/usr/local/www/PrusaSlicer ETCDIR=/usr/local/etc/PrusaSlicer --End SUB_LIST-- ---Begin make.conf--- USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles PACKAGE_BUILDING=yes PACKAGE_BUILDING_FLAVORS=yes MACHINE=i386 MACHINE_ARCH=i386 ARCH=${MACHINE_ARCH} #### #### # XXX: We really need this but cannot use it while 'make checksum' does not # try the next mirror on checksum failure. It currently retries the same # failed mirror and then fails rather then trying another. It *does* # try the next if the size is mismatched though. #MASTER_SITE_FREEBSD=yes # Build ALLOW_MAKE_JOBS_PACKAGES with 3 jobs MAKE_JOBS_NUMBER=3 #### Misc Poudriere #### .include "/etc/make.conf.ports_env" GID=0 UID=0 ---End make.conf--- --Resource limits-- cpu time (seconds, -t) unlimited file size (512-blocks, -f) unlimited data seg size (kbytes, -d) 524288 stack size (kbytes, -s) 65536 core file size (512-blocks, -c) unlimited max memory size (kbytes, -m) unlimited locked memory (kbytes, -l) unlimited max user processes (-u) 89999 open files (-n) 8192 virtual mem size (kbytes, -v) unlimited swap limit (kbytes, -w) unlimited socket buffer size (bytes, -b) unlimited pseudo-terminals (-p) unlimited kqueues (-k) unlimited umtx shared locks (-o) unlimited --End resource limits-- =================================================== ===== env: NO_DEPENDS=yes USER=root UID=0 GID=0 ===> License AGPLv3 accepted by the user =========================================================================== =================================================== ===== env: USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 ===> PrusaSlicer-2.6.0_6 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.20.9.pkg [140i386-default-job-05] Installing pkg-1.20.9... [140i386-default-job-05] Extracting pkg-1.20.9: .......... done ===> PrusaSlicer-2.6.0_6 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of PrusaSlicer-2.6.0_6 =========================================================================== =================================================== ===== env: USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 =========================================================================== =================================================== ===== env: NO_DEPENDS=yes USER=root UID=0 GID=0 ===> License AGPLv3 accepted by the user ===> Fetching all distfiles required by PrusaSlicer-2.6.0_6 for building =========================================================================== =================================================== ===== env: NO_DEPENDS=yes USER=root UID=0 GID=0 ===> License AGPLv3 accepted by the user ===> Fetching all distfiles required by PrusaSlicer-2.6.0_6 for building => SHA256 Checksum OK for PrusaSlicer/prusa3d-PrusaSlicer-version_2.6.0_GH0.tar.gz. =========================================================================== =================================================== ===== env: USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 =========================================================================== =================================================== ===== env: NO_DEPENDS=yes USER=root UID=0 GID=0 ===> License AGPLv3 accepted by the user ===> Fetching all distfiles required by PrusaSlicer-2.6.0_6 for building ===> Extracting for PrusaSlicer-2.6.0_6 => SHA256 Checksum OK for PrusaSlicer/prusa3d-PrusaSlicer-version_2.6.0_GH0.tar.gz. =========================================================================== =================================================== ===== env: USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 =========================================================================== =================================================== ===== env: NO_DEPENDS=yes USER=root UID=0 GID=0 ===> Patching for PrusaSlicer-2.6.0_6 ===> Applying FreeBSD patches for PrusaSlicer-2.6.0_6 from /usr/ports/cad/PrusaSlicer/files =========================================================================== =================================================== ===== env: USE_PACKAGE_DEPENDS_ONLY=1 USER=root UID=0 GID=0 ===> PrusaSlicer-2.6.0_6 depends on package: cereal>=1.3.0.10 - not found ===> Installing existing package /packages/All/cereal-1.3.2_1.pkg [140i386-default-job-05] Installing cereal-1.3.2_1... [140i386-default-job-05] `-- Installing boost-libs-1.83.0_1... [140i386-default-job-05] | `-- Installing icu-74.1,1... [140i386-default-job-05] | `-- Extracting icu-74.1,1: .......... done [140i386-default-job-05] `-- Extracting boost-libs-1.83.0_1: .......... done [140i386-default-job-05] Extracting cereal-1.3.2_1: .......... done ===== Message from boost-libs-1.83.0_1: -- You have built the Boost library with thread support. Don't forget to add -pthread to your linker options when linking your code. ===> PrusaSlicer-2.6.0_6 depends on package: cereal>=1.3.0.10 - found ===> Returning to build of PrusaSlicer-2.6.0_6 ===> PrusaSlicer-2.6.0_6 depends on package: cgal>=5.0.2 - not found ===> Installing existing package /packages/All/cgal-5.5.1_1.pkg [140i386-default-job-05] Installing cgal-5.5.1_1... /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/nester.hpp:645:22: note: in instantiation of function template specialization 'libnest2d::placers::PlacerBoilerplate>, Slic3r::ExPolygon, libnest2d::_Box, libnest2d::placers::NfpPConfig>::pack> *>>>' requested here return impl_.pack(item, remaining); ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/selections/firstfit.hpp:91:49: note: in instantiation of function template specialization 'libnest2d::PlacementStrategyLike>>::pack> *>>>' requested here if((was_packed = placers[j].pack(*it, rem(it, store_) ))) { ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/nester.hpp:736:24: note: in instantiation of function template specialization 'libnest2d::selections::_FirstFitSelection::packItems>, std::__wrap_iter *>, libnest2d::_Box &, libnest2d::placers::NfpPConfig &>' requested here impl_.template packItems(first, last, ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/nester.hpp:849:28: note: in instantiation of function template specialization 'libnest2d::SelectionStrategyLike>::packItems>, std::__wrap_iter *>, libnest2d::_Box &, libnest2d::placers::NfpPConfig &>' requested here selector_.template packItems( ^ In file included from /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/src/libnest2d.cpp:1: In file included from /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/libnest2d.hpp:16: In file included from /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/optimizers/nlopt/subplex.hpp:4: In file included from /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/optimizers/nlopt/nlopt_boilerplate.hpp:16: /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/utils/metaloop.hpp:97:16: warning: unqualified call to 'std::forward' [-Wunqualified-std-cast-call] fn_(N, forward(pack_element)); ^ std:: /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/utils/metaloop.hpp:121:9: note: in instantiation of function template specialization 'libnest2d::opt::metaloop::MapFn<0, libnest2d::opt::NloptOptimizer::ResultCopyFunc>::operator()' requested here MapFn {forward(fn)} (get(valtup)); ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/utils/metaloop.hpp:203:25: note: in instantiation of function template specialization 'libnest2d::opt::metaloop::_MetaLoop, double>::run &, libnest2d::opt::NloptOptimizer::ResultCopyFunc>' requested here MetaLoop().run(tup, forward(fn)); ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/optimizers/nlopt/nlopt_boilerplate.hpp:184:19: note: in instantiation of function template specialization 'libnest2d::opt::metaloop::apply' requested here metaloop::apply(ResultCopyFunc(*this), result.optimum); ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/optimizer.hpp:158:55: note: in instantiation of function template specialization 'libnest2d::opt::NloptOptimizer::optimize<(lambda at /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/placers/nfpplacer.hpp:802:44) &, double>' requested here return static_cast(this)->template optimize( ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/placers/nfpplacer.hpp:810:49: note: in instantiation of function template specialization 'libnest2d::opt::Optimizer::optimize_min<(lambda at /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/placers/nfpplacer.hpp:802:44) &, double>' requested here results[n] = solver.optimize_min(contour_ofn, ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/placers/placer_boilerplate.hpp:64:50: note: in instantiation of function template specialization 'libnest2d::placers::_NofitPolyPlacer>::trypack> *>>>' requested here auto&& r = static_cast(this)->trypack(item, rem); ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/nester.hpp:645:22: note: in instantiation of function template specialization 'libnest2d::placers::PlacerBoilerplate>, Slic3r::ExPolygon, libnest2d::_Box, libnest2d::placers::NfpPConfig>::pack> *>>>' requested here return impl_.pack(item, remaining); ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/selections/firstfit.hpp:91:49: note: in instantiation of function template specialization 'libnest2d::PlacementStrategyLike>>::pack> *>>>' requested here if((was_packed = placers[j].pack(*it, rem(it, store_) ))) { ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/nester.hpp:736:24: note: in instantiation of function template specialization 'libnest2d::selections::_FirstFitSelection::packItems>, std::__wrap_iter *>, libnest2d::_Box &, libnest2d::placers::NfpPConfig &>' requested here impl_.template packItems(first, last, ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/nester.hpp:849:28: note: in instantiation of function template specialization 'libnest2d::SelectionStrategyLike>::packItems>, std::__wrap_iter *>, libnest2d::_Box &, libnest2d::placers::NfpPConfig &>' requested here selector_.template packItems( ^ In file included from /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/src/libnest2d.cpp:1: In file included from /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/libnest2d.hpp:16: In file included from /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/optimizers/nlopt/subplex.hpp:4: In file included from /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/optimizers/nlopt/nlopt_boilerplate.hpp:14: /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/optimizer.hpp:159:21: warning: unqualified call to 'std::forward' [-Wunqualified-std-cast-call] forward(objectfunction), initvals, bounds... ); ^ std:: /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/placers/nfpplacer.hpp:861:53: note: in instantiation of function template specialization 'libnest2d::opt::Optimizer::optimize_min<(lambda at /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/placers/nfpplacer.hpp:853:37) &, double>' requested here results[n] = solver.optimize_min(hole_ofn, ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/placers/placer_boilerplate.hpp:64:50: note: in instantiation of function template specialization 'libnest2d::placers::_NofitPolyPlacer>::trypack> *>>>' requested here auto&& r = static_cast(this)->trypack(item, rem); ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/nester.hpp:645:22: note: in instantiation of function template specialization 'libnest2d::placers::PlacerBoilerplate>, Slic3r::ExPolygon, libnest2d::_Box, libnest2d::placers::NfpPConfig>::pack> *>>>' requested here return impl_.pack(item, remaining); ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/selections/firstfit.hpp:91:49: note: in instantiation of function template specialization 'libnest2d::PlacementStrategyLike>>::pack> *>>>' requested here if((was_packed = placers[j].pack(*it, rem(it, store_) ))) { ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/nester.hpp:736:24: note: in instantiation of function template specialization 'libnest2d::selections::_FirstFitSelection::packItems>, std::__wrap_iter *>, libnest2d::_Box &, libnest2d::placers::NfpPConfig &>' requested here impl_.template packItems(first, last, ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include/libnest2d/nester.hpp:849:28: note: in instantiation of function template specialization 'libnest2d::SelectionStrategyLike>::packItems>, std::__wrap_iter *>, libnest2d::_Box &, libnest2d::placers::NfpPConfig &>' requested here selector_.template packItems( ^ 19 warnings generated. [ 18% 94/491] /usr/bin/c++ -DCGAL_USE_GMPXX=1 -DSLIC3R_GUI -DUNICODE -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -MD -MT src/libslic3r/CMakeFiles/libslic3r_cgal.dir/MeshBoolean.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r_cgal.dir/MeshBoolean.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r_cgal.dir/MeshBoolean.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/MeshBoolean.cpp [ 18% 95/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/po rts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/AABBMesh.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/AABBMesh.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/AABBMesh.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/AABBMesh.cpp [ 19% 96/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/po rts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Algorithm/RegionExpansion.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Algorithm/RegionExpansion.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Algorithm/RegionExpansion.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Algorithm/RegionExpansion.cpp /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Algorithm/RegionExpansion.cpp:258:9: warning: variable 'iseed' set but not used [-Wunused-but-set-variable] int iseed = 0; ^ 1 warning generated. [ 19% 97/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/po rts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/BoundingBox.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/BoundingBox.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/BoundingBox.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/BoundingBox.cpp [ 19% 98/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/po rts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/BridgeDetector.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/BridgeDetector.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/BridgeDetector.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/BridgeDetector.cpp [ 19% 99/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/po rts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/BuildVolume.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/BuildVolume.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/BuildVolume.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/BuildVolume.cpp [ 19% 100/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/clipper.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/clipper.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/clipper.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/clipper.cpp [ 20% 101/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Brim.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Brim.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Brim.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Brim.cpp [ 20% 102/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Color.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Color.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Color.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Color.cpp [ 20% 103/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/ClipperUtils.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/ClipperUtils.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/ClipperUtils.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/ClipperUtils.cpp [ 20% 104/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/EdgeGrid.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/EdgeGrid.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/EdgeGrid.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/EdgeGrid.cpp [ 20% 105/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/ElephantFootCompensation.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/ElephantFootCompensation.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/ElephantFootCompensation.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/ElephantFootCompensation.cpp [ 21% 106/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/ExPolygon.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/ExPolygon.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/ExPolygon.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/ExPolygon.cpp [ 21% 107/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Config.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Config.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Config.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Config.cpp [ 21% 108/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Emboss.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Emboss.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Emboss.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Emboss.cpp [ 21% 109/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/ExPolygonsIndex.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/ExPolygonsIndex.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/ExPolygonsIndex.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/ExPolygonsIndex.cpp [ 21% 110/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Extruder.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Extruder.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Extruder.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Extruder.cpp [ 22% 111/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/ExtrusionRole.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/ExtrusionRole.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/ExtrusionRole.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/ExtrusionRole.cpp [ 22% 112/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/ExtrusionEntityCollection.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/ExtrusionEntityCollection.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/ExtrusionEntityCollection.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/ExtrusionEntityCollection.cpp [ 22% 113/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/ExtrusionEntity.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/ExtrusionEntity.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/ExtrusionEntity.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/ExtrusionEntity.cpp [ 22% 114/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Fill3DHoneycomb.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Fill3DHoneycomb.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Fill3DHoneycomb.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Fill/Fill3DHoneycomb.cpp [ 23% 115/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/ExtrusionSimulator.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/ExtrusionSimulator.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/ExtrusionSimulator.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/ExtrusionSimulator.cpp /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/ExtrusionSimulator.cpp:700:9: warning: variable 'volume_excess' set but not used [-Wunused-but-set-variable] float volume_excess = 0; ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/ExtrusionSimulator.cpp:701:9: warning: variable 'volume_deficit' set but not used [-Wunused-but-set-variable] float volume_deficit = 0; ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/ExtrusionSimulator.cpp:703:9: warning: variable 'area_circle_total' set but not used [-Wunused-but-set-variable] float area_circle_total = 0; ^ 3 warnings generated. [ 23% 116/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Fill.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Fill.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Fill.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Fill/Fill.cpp [ 23% 117/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillBase.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillBase.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillBase.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Fill/FillBase.cpp [ 23% 118/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillConcentric.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillConcentric.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillConcentric.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Fill/FillConcentric.cpp [ 23% 119/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillHoneycomb.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillHoneycomb.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillHoneycomb.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Fill/FillHoneycomb.cpp [ 24% 120/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillAdaptive.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillAdaptive.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillAdaptive.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Fill/FillAdaptive.cpp /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Fill/FillAdaptive.cpp:1392:59: warning: implicit conversion from 'type' (aka 'int') to 'const float' changes value from 2147483647 to 2147483648 [-Wimplicit-const-int-float-conversion] const auto hook_length = coordf_t(std::min(std::numeric_limits::max(), scale_(params.anchor_length))); ~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Fill/FillAdaptive.cpp:1393:59: warning: implicit conversion from 'type' (aka 'int') to 'const float' changes value from 2147483647 to 2147483648 [-Wimplicit-const-int-float-conversion] const auto hook_length_max = coordf_t(std::min(std::numeric_limits::max(), scale_(params.anchor_length_max))); ~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2 warnings generated. [ 24% 121/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillEnsuring.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillEnsuring.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillEnsuring.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Fill/FillEnsuring.cpp [ 24% 122/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillPlanePath.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillPlanePath.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillPlanePath.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Fill/FillPlanePath.cpp /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Fill/FillPlanePath.cpp:217:12: warning: variable 'pw' set but not used [-Wunused-but-set-variable] size_t pw = 1; ^ 1 warning generated. [ 24% 123/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillGyroid.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillGyroid.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillGyroid.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Fill/FillGyroid.cpp [ 24% 124/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillLine.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillLine.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillLine.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Fill/FillLine.cpp [ 25% 125/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Lightning/DistanceField.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Lightning/DistanceField.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Lightning/DistanceField.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Fill/Lightning/DistanceField.cpp [ 25% 126/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillLightning.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillLightning.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillLightning.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Fill/FillLightning.cpp [ 25% 127/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Lightning/Generator.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Lightning/Generator.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Lightning/Generator.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Fill/Lightning/Generator.cpp [ 25% 128/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Lightning/Layer.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Lightning/Layer.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Lightning/Layer.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Fill/Lightning/Layer.cpp [ 25% 129/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Lightning/TreeNode.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Lightning/TreeNode.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Fill/Lightning/TreeNode.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Fill/Lightning/TreeNode.cpp [ 26% 130/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Flow.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Flow.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Flow.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Flow.cpp [ 26% 131/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillRectilinear.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillRectilinear.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Fill/FillRectilinear.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Fill/FillRectilinear.cpp [ 26% 132/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Format/OBJ.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Format/OBJ.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Format/OBJ.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/OBJ.cpp [ 26% 133/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Format/objparser.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Format/objparser.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Format/objparser.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/objparser.cpp [ 26% 134/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Format/3mf.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Format/3mf.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Format/3mf.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/3mf.cpp [ 27% 135/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Format/AMF.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Format/AMF.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Format/AMF.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/AMF.cpp [ 27% 136/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Format/STL.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Format/STL.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Format/STL.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/STL.cpp [ 27% 137/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Format/SLAArchiveWriter.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Format/SLAArchiveWriter.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Format/SLAArchiveWriter.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/SLAArchiveWriter.cpp [ 27% 138/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Format/SLAArchiveReader.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Format/SLAArchiveReader.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Format/SLAArchiveReader.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/SLAArchiveReader.cpp [ 27% 139/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Format/ZipperArchiveImport.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Format/ZipperArchiveImport.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Format/ZipperArchiveImport.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/ZipperArchiveImport.cpp [ 28% 140/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Format/SL1_SVG.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Format/SL1_SVG.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Format/SL1_SVG.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/SL1_SVG.cpp [ 28% 141/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Format/SL1.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Format/SL1.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Format/SL1.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/SL1.cpp [ 28% 142/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Format/AnycubicSLA.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Format/AnycubicSLA.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Format/AnycubicSLA.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/AnycubicSLA.cpp FAILED: src/libslic3r/CMakeFiles/libslic3r.dir/Format/AnycubicSLA.cpp.o /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/ports/cad/PrusaS licer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Format/AnycubicSLA.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Format/AnycubicSLA.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Format/AnycubicSLA.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/AnycubicSLA.cpp /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/AnycubicSLA.cpp:327:5: error: no matching function for call to 'crop_value' crop_value(h.delay_before_exposure_s, 0.0f, 1000.0f); ^~~~~~~~~~ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/AnycubicSLA.cpp:219:24: note: candidate template ignored: deduced conflicting types for parameter 'T' ('std::float_t' (aka 'long double') vs. 'float') template void crop_value(T &val, T val_min, T val_max) ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/AnycubicSLA.cpp:330:5: error: no matching function for call to 'crop_value' crop_value(h.lift_distance_mm, 0.0f, 100.0f); ^~~~~~~~~~ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/AnycubicSLA.cpp:219:24: note: candidate template ignored: deduced conflicting types for parameter 'T' ('std::float_t' (aka 'long double') vs. 'float') template void crop_value(T &val, T val_min, T val_max) ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/AnycubicSLA.cpp:336:9: error: no matching function for call to 'crop_value' crop_value(h.lift_distance_mm, 0.0f, 100.0f); ^~~~~~~~~~ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/AnycubicSLA.cpp:219:24: note: candidate template ignored: deduced conflicting types for parameter 'T' ('std::float_t' (aka 'long double') vs. 'float') template void crop_value(T &val, T val_min, T val_max) ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/AnycubicSLA.cpp:342:5: error: no matching function for call to 'crop_value' crop_value(m.bottom_lift_speed_mms, 0.1f, 20.0f); ^~~~~~~~~~ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/AnycubicSLA.cpp:219:24: note: candidate template ignored: deduced conflicting types for parameter 'T' ('std::float_t' (aka 'long double') vs. 'float') template void crop_value(T &val, T val_min, T val_max) ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/AnycubicSLA.cpp:346:9: error: no matching function for call to 'crop_value' crop_value(m.bottom_lift_speed_mms, 0.1f, 20.0f); ^~~~~~~~~~ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/AnycubicSLA.cpp:219:24: note: candidate template ignored: deduced conflicting types for parameter 'T' ('std::float_t' (aka 'long double') vs. 'float') template void crop_value(T &val, T val_min, T val_max) ^ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/AnycubicSLA.cpp:352:5: error: no matching function for call to 'crop_value' crop_value(h.lift_speed_mms, 0.1f, 20.0f); ^~~~~~~~~~ /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/AnycubicSLA.cpp:219:24: note: candidate template ignored: deduced conflicting types for parameter 'T' ('std::float_t' (aka 'long double') vs. 'float') template void crop_value(T &val, T val_min, T val_max) ^ 6 errors generated. [ 28% 142/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Format/STEP.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Format/STEP.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Format/STEP.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/STEP.cpp [ 28% 142/491] /usr/bin/c++ -DBOOST_LOG_DYN_LINK -DLIBNEST2D_GEOMETRIES_libslic3r -DLIBNEST2D_OPTIMIZER_nlopt -DLIBNEST2D_STATIC -DLIBNEST2D_THREADING_tbb -DSLIC3R_GUI -DTBB_USE_CAPTURED_EXCEPTION=0 -DUNICODE -DUSE_TBB -DWXINTL_NO_GETTEXT_MACRO -D_UNICODE -DwxNO_UNSAFE_WXSTRING_CONV -DwxUSE_UNICODE -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/platform -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/.build/src/libslic3r -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libnest2d/include -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/miniz -I/wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/glu-libtess/include -isystem /usr/local/include/eigen3 -isystem /usr/local/include -isystem /wrkdirs/usr/p orts/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libigl -isystem /usr/local/include/Imath -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -Wall -Wno-reorder -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong -fno-strict-aliasing -DLIBICONV_PLUG -DNDEBUG -std=gnu++17 -fPIC -DNDEBUG -fsigned-char -Werror=return-type -Wno-ignored-attributes -Wno-deprecated-declarations -Wno-misleading-indentation -pthread -DOPENVDB_ABI_VERSION_NUMBER=10 -MD -MT src/libslic3r/CMakeFiles/libslic3r.dir/Format/SLAArchiveFormatRegistry.cpp.o -MF src/libslic3r/CMakeFiles/libslic3r.dir/Format/SLAArchiveFormatRegistry.cpp.o.d -o src/libslic3r/CMakeFiles/libslic3r.dir/Format/SLAArchiveFormatRegistry.cpp.o -c /wrkdirs/usr/ports/cad/PrusaSlicer/work/PrusaSlicer-version_2.6.0/src/libslic3r/Format/SLAArchiveFormatRegistry.cpp ninja: build stopped: subcommand failed. ===> Compilation failed unexpectedly. Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting the failure to the maintainer. *** Error code 1 Stop. make: stopped in /usr/ports/cad/PrusaSlicer