From nobody Sun Apr 10 15:34:15 2022 X-Original-To: pkg-fallout@mlmmj.nyi.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mlmmj.nyi.freebsd.org (Postfix) with ESMTP id C79DE1A8436F for ; Sun, 10 Apr 2022 15:34:15 +0000 (UTC) (envelope-from pkg-fallout@FreeBSD.org) Received: from mxrelay.nyi.freebsd.org (mxrelay.nyi.freebsd.org [IPv6:2610:1c1:1:606c::19:3]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256 client-signature RSA-PSS (4096 bits) client-digest SHA256) (Client CN "mxrelay.nyi.freebsd.org", Issuer "R3" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 4KbwyH31bwz3k50 for ; Sun, 10 Apr 2022 15:34:15 +0000 (UTC) (envelope-from pkg-fallout@FreeBSD.org) Received: from beefy8.nyi.freebsd.org (beefy8.nyi.freebsd.org [IPv6:2610:1c1:1:6080::16:17]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (Client did not present a certificate) by mxrelay.nyi.freebsd.org (Postfix) with ESMTPS id 4777A10DE2 for ; Sun, 10 Apr 2022 15:34:15 +0000 (UTC) (envelope-from pkg-fallout@FreeBSD.org) Received: from beefy8.nyi.freebsd.org (localhost [127.0.0.1]) by beefy8.nyi.freebsd.org (8.16.1/8.16.1) with ESMTP id 23AFYFG8015326 for ; Sun, 10 Apr 2022 15:34:15 GMT (envelope-from pkg-fallout@FreeBSD.org) Received: (from root@localhost) by beefy8.nyi.freebsd.org (8.16.1/8.16.1/Submit) id 23AFYFtt015325; Sun, 10 Apr 2022 15:34:15 GMT (envelope-from pkg-fallout@FreeBSD.org) Date: Sun, 10 Apr 2022 15:34:15 GMT From: pkg-fallout@FreeBSD.org Message-Id: <202204101534.23AFYFtt015325@beefy8.nyi.freebsd.org> To: pkg-fallout@FreeBSD.org Subject: [package - main-armv6-default][devel/bullet] Failed for bullet-3.22 in build ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=freebsd.org; s=dkim; t=1649604855; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc; bh=BcR++t0N2ipWTG1MRJKwYWruZuspZsHW0nOOZqWh2QM=; b=AZv8ziBtxGv5KAZg721yLqGv+lPPrJMBC+vPWHMzfjN8Qe2Cb02rUHdG/7LkogKYeIU/wR 9p0xV2bJwHVLsZohPfXSGN9/otLBWrEhRcf29KBSJtS5mQdxKA+N7QBT2Q107I4flEBWCo wvCFd10nrxtcdU8T7FVb5uFwsuqAMkKBu9psJx1do0DeDhc6J3VFPZzfm3jvOBHhFP2l9W a0gVAZD5cfwlVbCl6UhT82wsgBdNq4jMkLJNVa1F3O0sGblzr8jAjS3QV0hrJ2bSJZp5Id CpR3/b8ePKm4EQIDRwsjwLwChJy3PBZaLVOA+Oyjy0LCm0jEaXobzSryXaeYzQ== ARC-Seal: i=1; s=dkim; d=freebsd.org; t=1649604855; a=rsa-sha256; cv=none; b=bRiziQVfDPE4rBY6ojHioj3MO7HV6xVEP7aM0XWhfoJhImASlTrbp6sjmY2/CoRv6xcOlF X56Xa7o0yineqMDp4a80/TwWoN8z6vwDJkujS9cWg/JRHl/CBBSGxjvWEsBEJ7t4olyVq1 cJBddptvbu+cJxRUJJhQLzh1cG7k7cNFpgierrODkvtsjbsrJeRdwGA9mx9LJmbMFzvz5j 6r2ApkJKWPwJeexGEG5sOuNuEOGk3oQ/B8qe7NrlNqFNoyA2cfMLgRyUK2cQ4FBDIWdBvl WSrUH0z25v4y+Ln/IdMQqB9F6zvET/p4NYa0BAq8DoSum3btJCN6GW07nXUInw== ARC-Authentication-Results: i=1; mx1.freebsd.org; none X-ThisMailContainsUnwantedMimeParts: N List-Id: Fallout logs from package building List-Archive: https://lists.freebsd.org/archives/freebsd-pkg-fallout List-Help: List-Post: List-Subscribe: List-Unsubscribe: Sender: owner-freebsd-pkg-fallout@freebsd.org You are receiving this mail as a port that you maintain is failing to build on the FreeBSD package build server. Please investigate the failure and submit a PR to fix build. Maintainer: fluffy@FreeBSD.org Log URL: http://beefy8.nyi.freebsd.org/data/main-armv6-default/pec8868609027_s88162f7abd/logs/bullet-3.22.log Build URL: http://beefy8.nyi.freebsd.org/build.html?mastername=main-armv6-default&build=pec8868609027_s88162f7abd Log: =>> Building devel/bullet build started at Sun Apr 10 15:33:25 UTC 2022 port directory: /usr/ports/devel/bullet package name: bullet-3.22 building for: FreeBSD main-armv6-default-job-16 14.0-CURRENT FreeBSD 14.0-CURRENT 1400056 arm maintained by: fluffy@FreeBSD.org Makefile ident: Poudriere version: 3.2.8-21-g883afb07 Host OSVERSION: 1400050 Jail OSVERSION: 1400056 Job Id: 16 !!! Jail is newer than host. (Jail: 1400056, Host: 1400050) !!! !!! This is not supported. !!! !!! Host kernel must be same or newer than jail. !!! !!! Expect build failures. !!! ---Begin Environment--- SHELL=/bin/sh UNAME_p=armv6 UNAME_m=arm ABI_FILE=/usr/lib/crt1.o OSVERSION=1400056 UNAME_v=FreeBSD 14.0-CURRENT 1400056 UNAME_r=14.0-CURRENT BLOCKSIZE=K MAIL=/var/mail/root MM_CHARSET=UTF-8 LANG=C.UTF-8 STATUS=1 HOME=/root PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin LOCALBASE=/usr/local QEMU_EMULATING=1 USER=root LIBEXECPREFIX=/usr/local/libexec/poudriere POUDRIERE_VERSION=3.2.8-21-g883afb07 MASTERMNT=/usr/local/poudriere/data/.m/main-armv6-default/ref POUDRIERE_BUILD_TYPE=bulk PACKAGE_BUILDING=yes SAVED_TERM= PWD=/usr/local/poudriere/data/.m/main-armv6-default/ref/.p/pool P_PORTS_FEATURES=FLAVORS SELECTED_OPTIONS MASTERNAME=main-armv6-default SCRIPTPREFIX=/usr/local/share/poudriere OLDPWD=/usr/local/poudriere/data/.m/main-armv6-default/ref/.p SCRIPTPATH=/usr/local/share/poudriere/bulk.sh POUDRIEREPATH=/usr/local/bin/poudriere ---End Environment--- ---Begin Poudriere Port Flags/Env--- PORT_FLAGS= PKGENV= FLAVOR=single DEPENDS_ARGS= MAKE_ARGS= FLAVOR=single ---End Poudriere Port Flags/Env--- ---Begin OPTIONS List--- ===> The following configuration options are available for bullet-3.22: DOCS=on: Build and/or install documentation ===> Use 'make config' to modify these settings ---End OPTIONS List--- --MAINTAINER-- fluffy@FreeBSD.org --End MAINTAINER-- --CONFIGURE_ARGS-- --End CONFIGURE_ARGS-- --CONFIGURE_ENV-- XDG_DATA_HOME=/wrkdirs/usr/ports/devel/bullet/work-single XDG_CONFIG_HOME=/wrkdirs/usr/ports/devel/bullet/work-single XDG_CACHE_HOME=/wrkdirs/usr/ports/devel/bullet/work-single/.cache HOME=/wrkdirs/usr/ports/devel/bullet/work-single TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/devel/bullet/work-single/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin SHELL=/bin/sh CONFIG_SHELL=/bin/sh --End CONFIGURE_ENV-- --MAKE_ENV-- NINJA_STATUS="[%p %s/%t] " XDG_DATA_HOME=/wrkdirs/usr/ports/devel/bullet/work-single XDG_CONFIG_HOME=/wrkdirs/usr/ports/devel/bullet/work-single XDG_CACHE_HOME=/wrkdirs/usr/ports/devel/bullet/work-single/.cache HOME=/wrkdirs/usr/ports/devel/bullet/work-single TMPDIR="/tmp" PATH=/wrkdirs/usr/ports/devel/bullet/work-single/.bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/sbin:/usr/local/bin:/root/bin NO_PIE=yes MK_DEBUG_FILES=no MK_KERNEL_SYMBOLS=no SHELL=/bin/sh NO_LINT=YES DESTDIR=/wrkdirs/usr/ports/devel/bullet/work-single/stage PREFIX=/usr/local LOCALBASE=/usr/local CC="/nxb-bin/usr/bin/cc" CFLAGS="-O2 -pipe -fstack-protector-strong -fno-strict-aliasing " CPP="/nxb-bin/usr/bin/cpp" CPPFLAGS="" LDFLAGS=" -fstack-protector-strong " LIBS="" CXX="/nxb-bin/usr/bin/c++" CXXFLAGS="-O2 -pipe -fstack-protector-strong -fno-strict-aliasing " MANPREFIX="/usr/local" BSD_INSTALL_PROGRAM="install -s -m 555" BSD_INSTALL_LIB="install -s -m 0644" BSD_INSTALL_SCRIPT="install -m 555" BSD _INSTALL_DATA="install -m 0644" BSD_INSTALL_MAN="install -m 444" --End MAKE_ENV-- --PLIST_SUB-- LIB_VERSION=3.21 PORTDOCS="" CMAKE_BUILD_TYPE="release" OSREL=14.0 PREFIX=%D LOCALBASE=/usr/local RESETPREFIX=/usr/local LIB32DIR=lib DOCSDIR="share/doc/bullet" EXAMPLESDIR="share/examples/bullet" DATADIR="share/bullet" WWWDIR="www/bullet" ETCDIR="etc/bullet" --End PLIST_SUB-- --SUB_LIST-- PREFIX=/usr/local LOCALBASE=/usr/local DATADIR=/usr/local/share/bullet DOCSDIR=/usr/local/share/doc/bullet EXAMPLESDIR=/usr/local/share/examples/bullet WWWDIR=/usr/local/www/bullet ETCDIR=/usr/local/etc/bullet --End SUB_LIST-- ---Begin make.conf--- .sinclude "/etc/make.nxb.conf" USE_PACKAGE_DEPENDS=yes BATCH=yes WRKDIRPREFIX=/wrkdirs PORTSDIR=/usr/ports PACKAGES=/packages DISTDIR=/distfiles PACKAGE_BUILDING=yes PACKAGE_BUILDING_FLAVORS=yes MACHINE=arm MACHINE_ARCH=armv6 ARCH=${MACHINE_ARCH} #### /usr/local/etc/poudriere.d/make.conf #### # XXX: We really need this but cannot use it while 'make checksum' does not # try the next mirror on checksum failure. It currently retries the same # failed mirror and then fails rather then trying another. It *does* # try the next if the size is mismatched though. #MASTER_SITE_FREEBSD=yes # Build ALLOW_MAKE_JOBS_PACKAGES with 2 jobs MAKE_JOBS_NUMBER=2 #### /usr/ports/Mk/Scripts/ports_env.sh #### _CCVERSION_9d218390=FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) Target: armv6-unknown-freebsd14.0-gnueabihf Thread model: posix InstalledDir: /nxb-bin/usr/bin _ALTCCVERSION_9d218390=none _CXXINTERNAL_9c45a5b1=FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) Target: armv6-unknown-freebsd14.0-gnueabihf Thread model: posix InstalledDir: /nxb-bin/usr/bin "/nxb-bin/usr/bin/ld" "--eh-frame-hdr" "-dynamic-linker" "/libexec/ld-elf.so.1" "--hash-style=both" "--enable-new-dtags" "-o" "a.out" "/usr/lib/crt1.o" "/usr/lib/crti.o" "/usr/lib/crtbegin.o" "-L/usr/lib" "/dev/null" "-lc++" "-lm" "-lgcc" "--as-needed" "-lgcc_s" "--no-as-needed" "-lc" "-lgcc" "--as-needed" "-lgcc_s" "--no-as-needed" "/usr/lib/crtend.o" "/usr/lib/crtn.o" CC_OUTPUT_9d218390_58173849=yes CC_OUTPUT_9d218390_9bdba57c=yes CC_OUTPUT_9d218390_6a4fe7f5=yes CC_OUTPUT_9d218390_6bcac02b=yes CC_OUTPUT_9d218390_67d20829=yes CC_OUTPUT_9d218390_bfa62e83=yes CC_OUTPUT_9d218390_f0b4d593=yes CC_OUTPUT_9d218390_308abb44=yes CC_OUTPUT_9d218390_f00456e5=yes CC_OUTPUT_9d218390_65ad290d=yes CC_OUTPUT_9d218390_f2776b26=yes CC_OUTPUT_9d218390_b2657cc3=yes CC_OUTPUT_9d218390_380987f7=yes CC_OUTPUT_9d218390_160933ec=yes CC_OUTPUT_9d218390_fb62803b=yes _OBJC_CCVERSION_9d218390=FreeBSD clang version 13.0.0 (git@github.com:llvm/llvm-project.git llvmorg-13.0.0-0-gd7b669b3a303) Target: armv6-unknown-freebsd14.0-gnueabihf Thread model: posix InstalledDir: /nxb-bin/usr/bin _OBJC_ALTCCVERSION_9d218390=none ARCH=armv6 OPSYS=FreeBSD _OSRELEASE=14.0-CURRENT OSREL=14.0 OSVERSION=1400056 PYTHONBASE=/usr/local CONFIGURE_MAX_CMD_LEN=524288 HAVE_PORTS_ENV=1 #### Misc Poudriere #### GID=0 UID=0 DISABLE_MAKE_JOBS=poudriere ---End make.conf--- ---Begin make.nxb.conf--- CC=/nxb-bin/usr/bin/cc CPP=/nxb-bin/usr/bin/cpp CXX=/nxb-bin/usr/bin/c++ NM=/nxb-bin/usr/bin/nm LD=/nxb-bin/usr/bin/ld OBJCOPY=/nxb-bin/usr/bin/objcopy SIZE=/nxb-bin/usr/bin/size STRIPBIN=/nxb-bin/usr/bin/strip SED=/nxb-bin/usr/bin/sed RANLIB=/nxb-bin/usr/bin/ranlib YACC=/nxb-bin/usr/bin/yacc MAKE=/nxb-bin/usr/bin/make STRINGS=/nxb-bin/usr/bin/strings AWK=/nxb-bin/usr/bin/awk FLEX=/nxb-bin/usr/bin/flex ---End make.nxb.conf--- --Resource limits-- cpu time (seconds, -t) unlimited file size (512-blocks, -f) unlimited data seg size (kbytes, -d) 33554432 stack size (kbytes, -s) 524288 core file size (512-blocks, -c) unlimited max memory size (kbytes, -m) unlimited locked memory (kbytes, -l) unlimited max user processes (-u) 89999 open files (-n) 1024 virtual mem size (kbytes, -v) unlimited swap limit (kbytes, -w) unlimited socket buffer size (bytes, -b) unlimited pseudo-terminals (-p) unlimited kqueues (-k) unlimited umtx shared locks (-o) unlimited --End resource limits-- =================================================== ===> License ZLIB accepted by the user =========================================================================== =================================================== ===> bullet-3.22 depends on file: /usr/local/sbin/pkg - not found ===> Installing existing package /packages/All/pkg-1.17.5_1.pkg [main-armv6-default-job-16] Installing pkg-1.17.5_1... [main-armv6-default-job-16] Extracting pkg-1.17.5_1: .......... done ===> bullet-3.22 depends on file: /usr/local/sbin/pkg - found ===> Returning to build of bullet-3.22 =========================================================================== =================================================== =========================================================================== =================================================== ===> License ZLIB accepted by the user ===> Fetching all distfiles required by bullet-3.22 for building =========================================================================== [main-armv6-default-job-16] | `-- Extracting gettext-runtime-0.21: .......... done [main-armv6-default-job-16] `-- Extracting rhash-1.4.2: .......... done [main-armv6-default-job-16] Extracting cmake-3.22.2: .......... done ===== Message from ca_root_nss-3.76: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem ===> bullet-3.22 depends on file: /usr/local/bin/cmake - found ===> Returning to build of bullet-3.22 ===> bullet-3.22 depends on executable: ninja - not found ===> Installing existing package /packages/All/ninja-1.10.2,2.pkg [main-armv6-default-job-16] Installing ninja-1.10.2,2... [main-armv6-default-job-16] `-- Installing python38-3.8.13... [main-armv6-default-job-16] | `-- Installing libffi-3.3_1... [main-armv6-default-job-16] | `-- Extracting libffi-3.3_1: .......... done [main-armv6-default-job-16] | `-- Installing mpdecimal-2.5.1... [main-armv6-default-job-16] | `-- Extracting mpdecimal-2.5.1: .......... done [main-armv6-default-job-16] | `-- Installing readline-8.1.2... [main-armv6-default-job-16] | `-- Extracting readline-8.1.2: .......... done [main-armv6-default-job-16] `-- Extracting python38-3.8.13: .......... done [main-armv6-default-job-16] Extracting ninja-1.10.2,2: ........ done ===== Message from python38-3.8.13: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py38-gdbm databases/py-gdbm@py38 py38-sqlite3 databases/py-sqlite3@py38 py38-tkinter x11-toolkits/py-tkinter@py38 ===> bullet-3.22 depends on executable: ninja - found ===> Returning to build of bullet-3.22 ===> bullet-3.22 depends on package: xorgproto>=0 - not found ===> Installing existing package /packages/All/xorgproto-2021.5.pkg [main-armv6-default-job-16] Installing xorgproto-2021.5... [main-armv6-default-job-16] Extracting xorgproto-2021.5: .......... done ===> bullet-3.22 depends on package: xorgproto>=0 - found ===> Returning to build of bullet-3.22 ===> bullet-3.22 depends on package: xorgproto>=0 - found ===> bullet-3.22 depends on file: /usr/local/libdata/pkgconfig/x11.pc - not found ===> Installing existing package /packages/All/libX11-1.7.2,1.pkg [main-armv6-default-job-16] Installing libX11-1.7.2,1... [main-armv6-default-job-16] `-- Installing libxcb-1.14_1... [main-armv6-default-job-16] | `-- Installing libXau-1.0.9... [main-armv6-default-job-16] | `-- Extracting libXau-1.0.9: .......... done [main-armv6-default-job-16] | `-- Installing libXdmcp-1.1.3... [main-armv6-default-job-16] | `-- Extracting libXdmcp-1.1.3: ......... done [main-armv6-default-job-16] | `-- Installing libpthread-stubs-0.4... [main-armv6-default-job-16] | `-- Extracting libpthread-stubs-0.4: .... done [main-armv6-default-job-16] `-- Extracting libxcb-1.14_1: .......... done [main-armv6-default-job-16] Extracting libX11-1.7.2,1: .......... done ===> bullet-3.22 depends on file: /usr/local/libdata/pkgconfig/x11.pc - found ===> Returning to build of bullet-3.22 =========================================================================== =================================================== ===> bullet-3.22 depends on shared library: libGL.so - not found ===> Installing existing package /packages/All/libglvnd-1.4.0_1.pkg [main-armv6-default-job-16] Installing libglvnd-1.4.0_1... [main-armv6-default-job-16] `-- Installing libXext-1.3.4,1... [main-armv6-default-job-16] `-- Extracting libXext-1.3.4,1: .......... done [main-armv6-default-job-16] Extracting libglvnd-1.4.0_1: .......... done ===> bullet-3.22 depends on shared library: libGL.so - found (/usr/local/lib/libGL.so) ===> Returning to build of bullet-3.22 ===> bullet-3.22 depends on shared library: libGLU.so - not found ===> Installing existing package /packages/All/libGLU-9.0.2_1.pkg [main-armv6-default-job-16] Installing libGLU-9.0.2_1... [main-armv6-default-job-16] Extracting libGLU-9.0.2_1: ..... done ===> bullet-3.22 depends on shared library: libGLU.so - found (/usr/local/lib/libGLU.so) ===> Returning to build of bullet-3.22 ===> bullet-3.22 depends on shared library: libglut.so - not found ===> Installing existing package /packages/All/freeglut-3.2.1.pkg [main-armv6-default-job-16] Installing freeglut-3.2.1... [main-armv6-default-job-16] `-- Installing libICE-1.0.10,1... [main-armv6-default-job-16] `-- Extracting libICE-1.0.10,1: .......... done [main-armv6-default-job-16] `-- Installing libXi-1.8,1... [main-armv6-default-job-16] | `-- Installing libXfixes-6.0.0... [main-armv6-default-job-16] | `-- Extracting libXfixes-6.0.0: .......... done [main-armv6-default-job-16] `-- Extracting libXi-1.8,1: .......... done [main-armv6-default-job-16] `-- Installing libXrandr-1.5.2... [main-armv6-default-job-16] | `-- Installing libXrender-0.9.10_2... [main-armv6-default-job-16] | `-- Extracting libXrender-0.9.10_2: .......... done [main-armv6-default-job-16] `-- Extracting libXrandr-1.5.2: .......... done [main-armv6-default-job-16] `-- Installing libXxf86vm-1.1.4_3... [main-armv6-default-job-16] `-- Extracting libXxf86vm-1.1.4_3: .......... done [main-armv6-default-job-16] Extracting freeglut-3.2.1: .......... done ===== Message from freeglut-3.2.1: -- Joystick support is untested and it is unknown if it works. Do not hesitate to contact x11@FreeBSD.org if this causes issues. ===> bullet-3.22 depends on shared library: libglut.so - found (/usr/local/lib/libglut.so) ===> Returning to build of bullet-3.22 =========================================================================== =================================================== ===> Configuring for bullet-3.22 ===> Performing out-of-source build /bin/mkdir -p /wrkdirs/usr/ports/devel/bullet/work-single/.build CMake Deprecation Warning at CMakeLists.txt:1 (cmake_minimum_required): Compatibility with CMake < 2.8.12 will be removed from a future version of CMake. Update the VERSION argument value or use a ... suffix to tell CMake that the project does not need compatibility with older versions. -- The C compiler identification is Clang 13.0.0 -- The CXX compiler identification is Clang 13.0.0 -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working C compiler: /nxb-bin/usr/bin/cc - skipped -- Detecting C compile features -- Detecting C compile features - done -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working CXX compiler: /nxb-bin/usr/bin/c++ - skipped -- Detecting CXX compile features -- Detecting CXX compile features - done BSD? -- Looking for pthread.h -- Looking for pthread.h - found -- Found Threads: TRUE CMake Warning (dev) at /usr/local/share/cmake/Modules/FindOpenGL.cmake:315 (message): Policy CMP0072 is not set: FindOpenGL prefers GLVND by default when available. Run "cmake --help-policy CMP0072" for policy details. Use the cmake_policy command to set the policy and suppress this warning. FindOpenGL found both a legacy GL library: OPENGL_gl_LIBRARY: /usr/local/lib/libGL.so and GLVND libraries for OpenGL and GLX: OPENGL_opengl_LIBRARY: /usr/local/lib/libOpenGL.so OPENGL_glx_LIBRARY: /usr/local/lib/libGLX.so OpenGL_GL_PREFERENCE has not been set to "GLVND" or "LEGACY", so for compatibility with CMake 3.10 and below the legacy GL library will be used. Call Stack (most recent call first): CMakeLists.txt:312 (FIND_PACKAGE) This warning is for project developers. Use -Wno-dev to suppress it. -- Found OpenGL: /usr/local/lib/libOpenGL.so OPENGL FOUND /usr/local/lib/libGL.so/usr/local/lib/libGLU.so -- Configuring done -- Generating done CMake Warning: Manually-specified variables were not used by the project: BUILD_BULLET3_DEMOS BUILD_CPU_DEMOS CMAKE_COLOR_MAKEFILE CMAKE_C_FLAGS_DEBUG CMAKE_MODULE_LINKER_FLAGS CMAKE_VERBOSE_MAKEFILE ENABLE_VHACD -- Build files have been written to: /wrkdirs/usr/ports/devel/bullet/work-single/.build =========================================================================== =================================================== ===> Building for bullet-3.22 [ 0% 1/308] /nxb-bin/usr/bin/c++ -DBT_THREADSAFE=1 -DBT_USE_EGL -DBT_USE_OPENMP=1 -DLinearMath_EXPORTS -DNO_OPENGL3 -I/wrkdirs/usr/ports/devel/bullet/work-single/bullet3-3.22/src -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -std=c++11 -fopenmp -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -fPIC -MD -MT src/LinearMath/CMakeFiles/LinearMath.dir/TaskScheduler/btThreadSupportPosix.o -MF src/LinearMath/CMakeFiles/LinearMath.dir/TaskScheduler/btThreadSupportPosix.o.d -o src/LinearMath/CMakeFiles/LinearMath.dir/TaskScheduler/btThreadSupportPosix.o -c /wrkdirs/usr/ports/devel/bullet/work-single/bullet3-3.22/src/LinearMath/TaskScheduler/btThreadSupportPosix.cpp [ 0% 2/308] /nxb-bin/usr/bin/c++ -DBT_THREADSAFE=1 -DBT_USE_EGL -DBT_USE_OPENMP=1 -DLinearMath_EXPORTS -DNO_OPENGL3 -I/wrkdirs/usr/ports/devel/bullet/work-single/bullet3-3.22/src -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -std=c++11 -fopenmp -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -fPIC -MD -MT src/LinearMath/CMakeFiles/LinearMath.dir/TaskScheduler/btThreadSupportWin32.o -MF src/LinearMath/CMakeFiles/LinearMath.dir/TaskScheduler/btThreadSupportWin32.o.d -o src/LinearMath/CMakeFiles/LinearMath.dir/TaskScheduler/btThreadSupportWin32.o -c /wrkdirs/usr/ports/devel/bullet/work-single/bullet3-3.22/src/LinearMath/TaskScheduler/btThreadSupportWin32.cpp [ 0% 3/308] /nxb-bin/usr/bin/c++ -DBT_THREADSAFE=1 -DBT_USE_EGL -DBT_USE_OPENMP=1 -DBullet3Common_EXPORTS -DNO_OPENGL3 -I/wrkdirs/usr/ports/devel/bullet/work-single/bullet3-3.22/src -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -std=c++11 -fopenmp -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -fPIC -MD -MT src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3AlignedAllocator.o -MF src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3AlignedAllocator.o.d -o src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3AlignedAllocator.o -c /wrkdirs/usr/ports/devel/bullet/work-single/bullet3-3.22/src/Bullet3Common/b3AlignedAllocator.cpp [ 1% 4/308] /nxb-bin/usr/bin/c++ -DBT_THREADSAFE=1 -DBT_USE_EGL -DBT_USE_OPENMP=1 -DBullet3Common_EXPORTS -DNO_OPENGL3 -I/wrkdirs/usr/ports/devel/bullet/work-single/bullet3-3.22/src -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -std=c++11 -fopenmp -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -fPIC -MD -MT src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3Vector3.o -MF src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3Vector3.o.d -o src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3Vector3.o -c /wrkdirs/usr/ports/devel/bullet/work-single/bullet3-3.22/src/Bullet3Common/b3Vector3.cpp [ 1% 5/308] /nxb-bin/usr/bin/c++ -DBT_THREADSAFE=1 -DBT_USE_EGL -DBT_USE_OPENMP=1 -DBullet3Common_EXPORTS -DNO_OPENGL3 -I/wrkdirs/usr/ports/devel/bullet/work-single/bullet3-3.22/src -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -std=c++11 -fopenmp -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -fPIC -MD -MT src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3Logging.o -MF src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3Logging.o.d -o src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3Logging.o -c /wrkdirs/usr/ports/devel/bullet/work-single/bullet3-3.22/src/Bullet3Common/b3Logging.cpp [ 1% 6/308] : && /nxb-bin/usr/bin/c++ -fPIC -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -std=c++11 -fopenmp -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -fstack-protector-strong -shared -Wl,-soname,libBullet3Common.so.3.21 -o src/Bullet3Common/libBullet3Common.so.3.21 src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3AlignedAllocator.o src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3Vector3.o src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3Logging.o -pthread && : FAILED: src/Bullet3Common/libBullet3Common.so.3.21 : && /nxb-bin/usr/bin/c++ -fPIC -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -std=c++11 -fopenmp -O2 -pipe -fstack-protector-strong -fno-strict-aliasing -fstack-protector-strong -shared -Wl,-soname,libBullet3Common.so.3.21 -o src/Bullet3Common/libBullet3Common.so.3.21 src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3AlignedAllocator.o src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3Vector3.o src/Bullet3Common/CMakeFiles/Bullet3Common.dir/b3Logging.o -pthread && : ld: error: unable to find library -lomp c++: error: linker command failed with exit code 1 (use -v to see invocation) ninja: build stopped: subcommand failed. *** Error code 1 Stop. make: stopped in /usr/ports/devel/bullet