[Bug 282744] setfib does not add the default gateway to the second routing table.

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=282744

--- Comment #4 from Vladyslav V. Prodan <admin@support.od.ua> ---
(In reply to Marek Zarychta from comment #2)


Thank you, it helped.

root@vb-14-1:~ # ifconfig em2 inet 192.168.77.104/24 fib 1 up
root@vb-14-1:~ # ifconfig em2
em2: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0
mtu 15                                     00
       
options=48505bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM    
                               
,TSO4,LRO,VLAN_HWFILTER,VLAN_HWTSO,HWSTATS,MEXTPG>
        ether 08:00:27:33:a3:63
        inet 192.168.77.104 netmask 0xffffff00 broadcast 192.168.77.255
        inet6 fe80::a00:27ff:fe33:a363%em2 prefixlen 64 scopeid 0x3
        fib: 1
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
        nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
root@vb-14-1:~ # route add default 192.168.77.2 -fib 1
add net default: gateway 192.168.77.2 fib 1

root@vb-14-1:~ # netstat -rnF 1
Routing tables (fib: 1)

Internet:
Destination        Gateway            Flags     Netif Expire
default            192.168.77.2       UGS         em2
127.0.0.1          link#5             UHS         lo0
192.168.77.0/24    link#3             U           em2
192.168.77.104     link#5             UHS         lo0

Internet6:
Destination                       Gateway                       Flags     Netif
Exp                                     ire
::/96                             link#5                        URS         lo0
::1                               link#5                        UHS         lo0
::ffff:0.0.0.0/96                 link#5                        URS         lo0
fe80::%lo0/10                     link#5                        URS         lo0
ff02::/16                         link#5                        URS         lo0


But! for ipv6 addresses to appear in fib 1, you need to reboot the system...

-- 
You are receiving this mail because:
You are the assignee for the bug.