Re: WD Blue 510 SSD and strange write performance
- Reply: mike tancsa : "Re: WD Blue 510 SSD and strange write performance"
- In reply to: mike tancsa : "Re: WD Blue 510 SSD and strange write performance"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Fri, 15 Mar 2024 19:09:56 UTC
I've got both the Kingston and Micron versions of these in production use and have seen nothing like this at all; they get hit pretty hard too, including release building (both direct and cross-builds) and similar stuff. On 3/15/2024 2:17 PM, mike tancsa wrote: > On 3/14/2024 4:58 PM, Frank Leonhardt wrote: >> Sorry - not that deeply into modern SSD (never written a driver for >> one), but based on my understanding your TRIM theory makes sense to >> me. I'd try turning it off. It does seem to be an ongoing source of >> snafus. >> >> I did use WD Blue SSDs but I suspect they vary quite a bit. I've had >> rather too many early failures. I wouldn't use them in production but >> okay for Windoze. We all know deep down there's a reason the >> enterprise SSDs cost what they do :-) >> >> I'll keep thinking > > Thanks for the input. I think these drives are just kinda broken :( I > noticed we had the 2TB versions of this line, but they seem rather > different and I am not able to trigger the errors with them > thankfully. Even stranger, I have a 1TB version of this drive I > bought from a while back that has the same firmware, but does NOT have > this issue. However, the output of the identifier is slightly > different. Who knows, it could be some component WD uses that *should > be* the same but is not and is causing some subtle pathology. > > > I tried turning off NCQ on the controller and it didnt seem to make a > difference. Then I turned off autotrim and did a manual trim of the > pool, then did the tests and same sorts of errors. I think I am just > gonna cut my losses with these disks :( Even if I figured out some > work around at this point, I would not deploy them into production. I > doubt I will be able to get anywhere with WD. Farewell my 400 bucks :( > > (da6:mpr0:0:16:0): READ(10). CDB: 28 00 6d e0 ae 28 00 00 08 00 > (da6:mpr0:0:16:0): CAM status: CCB request completed with an error > (da6:mpr0:0:16:0): Retrying command, 3 more tries remain > (da6:mpr0:0:16:0): WRITE(10). CDB: 2a 00 0c cb 3f 00 00 00 e8 00 > (da6:mpr0:0:16:0): CAM status: CCB request completed with an error > (da6:mpr0:0:16:0): Retrying command, 3 more tries remain > (da6:mpr0:0:16:0): READ(10). CDB: 28 00 6d e0 ad 28 00 01 00 00 > (da6:mpr0:0:16:0): CAM status: CCB request completed with an error > (da6:mpr0:0:16:0): Retrying command, 3 more tries remain > (da6:mpr0:0:16:0): READ(10). CDB: 28 00 6d e0 ac 28 00 00 f8 00 > (da6:mpr0:0:16:0): CAM status: CCB request completed with an error > (da6:mpr0:0:16:0): Retrying command, 3 more tries remain > (da6:mpr0:0:16:0): WRITE(10). CDB: 2a 00 40 07 df 88 00 01 00 00 > (da6:mpr0:0:16:0): CAM status: CCB request completed with an error > (da6:mpr0:0:16:0): Retrying command, 3 more tries remain > (da6:mpr0:0:16:0): WRITE(10). CDB: 2a 00 3f 48 72 08 00 01 00 00 > (da6:mpr0:0:16:0): CAM status: SCSI Status Error > (da6:mpr0:0:16:0): SCSI status: Check Condition > (da6:mpr0:0:16:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, > reset, or bus device reset occurred) > (da6:mpr0:0:16:0): Retrying command (per sense data) > mpr0: Controller reported scsi ioc terminated tgt 15 SMID 2036 loginfo > 31110f00 > mpr0: Controller reported scsi ioc terminated tgt 15 SMID 637 loginfo > 31110f00 > (da5:mpr0:0:15:0): WRITE(10). CDB: 2a 00 41 98 42 00 00 01 00 00 > mpr0: Controller reported scsi ioc terminated tgt 15 SMID 1242 loginfo > 31110f00 > mpr0: Controller reported scsi ioc terminated tgt 15 SMID 979 loginfo > 31110f00 > mpr0: Controller reported scsi ioc terminated tgt 15 SMID 1243 loginfo > 31110f00 > mpr0: Controller reported scsi ioc terminated tgt 15 SMID 2091 loginfo > 31110f00 > mpr0: Controller reported scsi ioc terminated tgt 15 SMID 1612 loginfo > 31110f00 > mpr0: Controller reported scsi ioc terminated tgt 15 SMID 2093 loginfo > 31110f00 > mpr0: Controller reported scsi ioc terminated tgt 15 SMID 152 loginfo > 31110f00 > mpr0: Controller reported scsi ioc terminated tgt 15 SMID 2132 loginfo > 31110f00 > (da5:mpr0:0:15:0): CAM status: CCB request completed with an error > (da5:mpr0:0:15:0): Retrying command, 3 more tries remain > (da5:mpr0:0:15:0): WRITE(10). CDB: 2a 00 43 17 dc 88 00 01 00 00 > (da5:mpr0:0:15:0): CAM status: CCB request completed with an error > (da5:mpr0:0:15:0): Retrying command, 3 more tries remain > (da5:mpr0:0:15:0): WRITE(10). CDB: 2a 00 41 98 43 00 00 00 50 00 > (da5:mpr0:0:15:0): CAM status: CCB request completed with an error > (da5:mpr0:0:15:0): Retrying command, 3 more tries remain > (da5:mpr0:0:15:0): WRITE(10). CDB: 2a 00 0c d4 f6 80 00 00 68 00 > (da5:mpr0:0:15:0): CAM status: CCB request completed with an error > (da5:mpr0:0:15:0): Retrying command, 3 more tries remain > (da5:mpr0:0:15:0): WRITE(10). CDB: 2a 00 0c d4 f5 80 00 01 00 00 > (da5:mpr0:0:15:0): CAM status: CCB request completed with an error > (da5:mpr0:0:15:0): Retrying command, 3 more tries remain > (da5:mpr0:0:15:0): READ(10). CDB: 28 00 05 dc 12 28 00 00 f8 00 > (da5:mpr0:0:15:0): CAM status: CCB request completed with an error > (da5:mpr0:0:15:0): Retrying command, 3 more tries remain > (da5:mpr0:0:15:0): READ(10). CDB: 28 00 05 dc 0f b0 00 00 88 00 > (da5:mpr0:0:15:0): CAM status: CCB request completed with an error > (da5:mpr0:0:15:0): Retrying command, 3 more tries remain > (da5:mpr0:0:15:0): WRITE(10). CDB: 2a 00 02 96 7e 80 00 00 10 00 > (da5:mpr0:0:15:0): CAM status: CCB request completed with an error > (da5:mpr0:0:15:0): Retrying command, 3 more tries remain > (da5:mpr0:0:15:0): READ(10). CDB: 28 00 6f 5b 8d 68 00 01 00 00 > (da5:mpr0:0:15:0): CAM status: CCB request completed with an error > (da5:mpr0:0:15:0): Retrying command, 3 more tries remain > (da5:mpr0:0:15:0): WRITE(10). CDB: 2a 00 41 98 42 00 00 01 00 00 > (da5:mpr0:0:15:0): CAM status: SCSI Status Error > (da5:mpr0:0:15:0): SCSI status: Check Condition > (da5:mpr0:0:15:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, > reset, or bus device reset occurred) > (da5:mpr0:0:15:0): Retrying command (per sense data) > > > > -- -- Karl Denninger /The Market-Ticker/ S/MIME Email accepted and preferred