Re: some issues with 14.1

> On 13 Aug 2024, at 20:46, Warner Losh <imp@bsdimp.com> wrote:
> 
> 
> 
> On Tue, Aug 13, 2024 at 1:28 AM Daniel Braniss <danny@cs.huji.ac.il <mailto:danny@cs.huji.ac.il>> wrote:
> hi,
> these are some issues I’m having with 14.1.
> 1- I use SOL to view the console via ipmi - not the serial but the serial-over-lan.
>     up to13.2 all is ok, by all i mean:
>         1 - boot/kernel/init output is visible
>         2 - escape to debugger via \n~^B works.
>         3 - /dev/console is fine
>    with 14.1:
>         1- init output is missing (have to guess why multiuser fails :-)
>         2- no longer works
>         3- is not working (hence explaining 1)
> any insights?
> 
> This is likely due to using UEFI. How did you configure this before with BIOS?

it’s happening also with vmware and bhive so I don’t think the BIOS is involved.
managed to solve - magically- the kernel/init outputs,
but now i’m still left with a non working escape to debugger,
will have to check the changes in the kernel…
thanks,
	danny

> 
> Warner