smartpqi0 "panic: Segment size is not aligned" Related panic on savecore?
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Mon, 28 Nov 2022 21:17:32 UTC
The HPE P408i-a SR Gen10 3.00/smartpqi(4) on an HP DL325 EYPC system worked well under 13.* and a SATA SSD but is providing odd behavior under the 14-CURRENT 2022-11-23 RE snapshot. The dmesg is blown with this incrementing error: ... (probe0:smartpqi0:0:582:0): Down reving Protocol Version from 6 to 2? (probe1:smartpqi0:0:583:0): Down reving Protocol Version from 6 to 2? (probe0:smartpqi0:0:584:0): Down reving Protocol Version from 6 to 2? ... (probe0:smartpqi0:0:1088:2): Down reving Protocol Version from 6 to 5? pass0 at smartpqi0 bus 0 scbus0 target 64 lun 0 pass0: <HPE Smart Adapter 3.00> Fixed Enclosure Services SPC-3 SCSI device (quiets down) dd'ing the 2022-11-23 Release Engineering VM raw snapshot to a device boots fine via USB and performs a growfs but booting to the HBA results in a panic when savecore it run, reporting: panic: Segment size is not aligned Workaround: Set savecore_enable="NO" in rc.conf before booting. Reproduction: service savecore onestart Cleanup: fsck / in single user mode and disable savecore as needed. Possibly related? Open (note savecore): https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=240145 Resolved with the same "Segment size is not aligned" panic: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=259541 https://reviews.freebsd.org/D30182 Should I update that second PR? Have any suggestions for verifying the issue? All the best, Michael