Re: iichid/hms keyboard/mouse wrongly reattached to uhid/ums
- In reply to: Ivan Quitschal : "RES: iichid/hms keyboard/mouse wrongly reattached to uhid/ums"
- Go to: [ bottom of page ] [ top of archives ] [ this month ]
Date: Mon, 27 Jun 2022 16:27:07 UTC
On Mon, 27 Jun 2022 16:18:58 +0000 Ivan Quitschal <tezeka@hotmail.com> wrote: > > Hi, > > > >Can you dump "kldstat" at the different times? > > >I guess it may be just be that the wrong module is loaded first, so > >it grabs the device, because there are no other drivers loaded, even > >though ums is a generic driver. > > >Try loading all relevant drivers in /boot/loader.conf . Then the > >attach order shouldn't matter. > > >--HPS > > > Hi Michael > > Yes , hw.usb.usbhid.enable="1" is in loader.conf , not sysctl > > Hi Warner > > When ums.ko is up, the second attach is always taken by "ums" first > no matter what. First time you boot tho, it takes the correct one > (hms) > > Hi Hans > > Looks like this below is the only order I could make it work even tho > uhid and usbhid get loaded regardless what I put on loader.conf > > usbhid_load="NO" <-- still loaded anyway > uhid_load="NO" <-- still loaded anyway > ums_load="NO" <- this one is not loaded > ic_load="YES" > iichid_load="YES" > hidbus_load="YES" > hsctrl_load="YES" > hidmap_load="YES" > hcons_load="YES" > hkbd_load="YES" > hms_load="YES" > hmt_load="YES" > hconf_load="YES" > > hw.usb.usbhid.enable="1" > > with the order below , after 5 reboots and lots of kvm switches , it > always ended up on the right iichid device. Seems to be working now > > but like I said, its random, let see after some more reboots if this > rule is still valid I don't know if it makes any difference in your case, but I had best results loading these drivers through rc.conf, e.g.: sysrc kld_list+="hidraw hkbd" Cheers Michael -- Michael Gmelin