Re: Arduino IDF -> make/automake based environment
Date: Wed, 29 Dec 2021 07:10:02 UTC
> On 29 Dec 2021, at 01:25, FreeBSD User <freebsd@walstatt-de.de> wrote: > > On Mon, 20 Dec 2021 14:35:10 +0100 > Marc Fonvieille <blackend@freebsd.org <mailto:blackend@freebsd.org>> wrote: > >> Le 19.12.2021 21:03, Andrew Stevenson a écrit : >>> >>> >>>> On 19. Dec 2021, at 12:18, FreeBSD User <freebsd@walstatt-de.de> wrote: >>>> >>>> environment. Since I'm interested in coding for some smaller AMTEL MCUs and ESP32 >>>> and like to digg a bit deeper than simply clicking a host base from a menu, I'm not >>>> afraid of doing some larger basic setup if needed. >>> >>> If by small AMTEL MCUs you mean AVRs then avr-gcc and avrdude are in ports. >>> >> >> For ESP32, you should look at: >> https://wiki.freebsd.org/electronics/arduino/esp32 > > Following these instructions with the most recent required ports on the latest 13-STABLE, > results in an linker error: > > /usr/local/xtensa-esp32-elf/bin/../lib/gcc/xtensa-esp32-elf/5.2.0/../../../../xtensa-esp32-elf/bin/ld: > cannot find crt1-sim.o: No such file or directory > /usr/local/xtensa-esp32-elf/bin/../lib/gcc/xtensa-esp32-elf/5.2.0/../../../../xtensa-esp32-elf/bin/ld: > cannot find _vectors.o: No such file or directory > collect2: error: ld returned 1 exit status > > >> and >> https://forums.freebsd.org/threads/a-guide-for-installing-esp32-board-for-arduino-on-freebsd12-update-2021-08-17.78408/ <https://forums.freebsd.org/threads/a-guide-for-installing-esp32-board-for-arduino-on-freebsd12-update-2021-08-17.78408/> i gave up compiling the xtensa stuff, specially after espressif came out with a riscv version. so I downloaded the oficial idf and under FreeBSD-13 it almost worked out of the box, if you want I can search my notes … danny